How to Set Up a Wood Shop That Works for You - Free PDF Tool Included

Подписаться 549 тыс.

Просмотров 92 тыс.

50% 1

Support what we do at www.kmtools.com
In today’s video we created this really cool FREE Shop Layout Tool! I walk you through my thoughts on shop layout and how to use this tool to save you time and money. We are also having a Blem sale for Stop Blocks and Dovetail Jigs. We talk about best practices for efficiency, organization and workflow. I’ve been in 5 shops over the years from 120 sqft to 16,000 sqft so this is a subject I’ve put a ton of thought and effort into.
Let me know what you’d like to see next! Please like, comment and subscribe.
----
Support what we do at www.kmtools.com
Blem Sale kmtools.com/collections/blem-...
Free Shop Layout Tool kmtools.com/collections/plans...
Get Notified about the Router Plane, Chisel Mallet, Free Plans and More kmtools.com/pages/kmtools-new...
The Katz-Moses Woodworker’s With Disability Fund kmtools.com/pages/kmww-charity
----
*Check out OUR BRAND NEW STORE for tons of great TOOLS and Support the Katz-Moses Woodworkers with Disabilities Fund*: www.KMTools.com
Buy the Katz-Moses Stop Block: kmtools.com/collections/stop-...
Buy the Katz-Moses Magnetic Dovetail Jig: kmtools.com/collections/dovet...
*Buy the Katz-Moses Woodworking Apron*: kmtools.com/collections/workwear
Donate to The Katz-Moses Woodworkers with Disabilities Fund kmtools.com/pages/kmww-charity
----
Timestamps
Intro- Shops of all Sizes 0:00
Free Shop Layout Tool 0:48
How to Use The Layout Tool 2:00
Let’s Talk about Shop Setup 4:19
WorkFlow and Lumber 4:58
Table Saw Jointer Planer 5:25
What is Most Important? 6:25
Assembly and Finishing 7:43
Blem Sale 8:20
Hand Tools 9:00
Assembling Boxes/Cabinets 10:38
Sharpening/Final Thoughts on Electrical and Dust Collection 11:05
Outro 12:35
----
I have Walnut Slabs for sale: kmtools.com/collections/walnu...
BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off
Total Boat Epoxy: bit.ly/30bA39o 10% Discount code JKATZMO
----
Essential Woodworking Skills Playlist: • Essential Woodworking ...
----
Woodworking Routers Video Playlist: • DIY Router Table Build...
----
Woodworking Joint of the Week Playlist: • Woodworking Joint of t...
----
Woodworking in SLOW MOTION Playlist:
• Slow Motion Woodworkin...
----
Tool Tune Up Thursday Playlist: • Tool Tune Up Thursday
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Tools I love:
My Apron: kmtools.com/collections/workwear
My favorite Dozuki dovetail saw - shop.kmtools.com/dozuki
My favorite Ryoba saw - shop.kmtools.com/ryoba
Marking Gauge: shop.kmtools.com/dbmk
Marking Knife: shop.kmtools.com/dbmk
NEW Suizan Flush Trim Saw: shop.kmtools.com/flush
Narex Richter Chisels: lddy.no/ussg
Knew Concepts Coping Saw (best deal I’ve found): lddy.no/120mz
Dewalt Planer Package: amzn.to/2thEf6O
CMT Chrome are the Absolute Best Table Saw Blades (JKM10CMT for Additional 10% Off)- lddy.no/ggf9
Great Small Tape Measure: lddy.no/120n2
BLEM Combination Squares (high accuracy and value at a fraction of the price due to cosmetic scratch): lddy.no/120n3
The ABSOLUTE best Sandpaper on the market: lddy.no/10ucv
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
5 Minute Epoxy 10% Discount code JKATZMO: bit.ly/30bA39o
2:1 High Performance Epoxy 10% Discount code JKATZMO: bit.ly/30bA39o
Dewalt Trim Router: amzn.to/3Ay6c7D
Dewalt Full Size Router Kit: amzn.to/3FH8Njp
Dewalt Planer: amzn.to/2YSkpiS
Bosch 1.25 HP Colt Router: amzn.to/3DzNjmF
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
MY CNC MACHINES (I highly recommend both)
Bescutter Laser’s Website: bit.ly/bescutter
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA

Хобби

Опубликовано:

2 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 105

@katzmosestools Год назад

*Support what we do at* www.kmtools.com *Blem Sale* kmtools.com/collections/blem-sale *Free Shop Layout Tool* kmtools.com/collections/plans/products/shop-layout-plans *Get Notified about the Router Plane, Chisel Mallet, Free Plans and More* kmtools.com/pages/kmtools-newsletter *The Katz-Moses Woodworker’s With Disability Fund* kmtools.com/pages/kmww-charity

@Lumberox Год назад

Man. It’s great to see great people succeed.

@Spacepod96 Год назад

I have a 96 sq.ft. workshop. Not much room so i built my mobile workbench to act as my out feed table to my benchsaw and table thicknesser which are also mobile. Im currently adapting my work bench so it will have a router table section. Improvise, adapt, overcome!!

@mtnjak 23 дня назад

Great idea and next level by put virtual boards on the cutouts

@onehandedmaker Год назад

I must watch this video over and over then redo my workshop. One Handed Maker

@MMWoodworking Год назад

Haven't even watched, yet leaving a like purely for Jonathan's facial expression at 0:06 He looks so happy.

@IT_Dinosaur Год назад

Kudos JKM - a real service to the community

@simong-uk Год назад

Hi Jonathan, I wish you every success in your new shop. Stay safe. 👍

@simong-uk Год назад

Hi again, don't forget safety and First Aid ! ! ! I have a first aid kit thanks to your video on the subject, and yesterday I was very happy I did . . . it was a small accident with a cabinet cross cut saw, inside of my left thumb, the nail stopped it going very deep. Thanks Jonathan. Stay safe.

@rexjones3847 Год назад

Building a shop right now and this has some excellent tips for workflow. Gonna help eliminate moving my tools several times LOL. Good job and Thank you for all of your tips and comments.

@raymitchell9736 3 месяца назад

First of all I want to thank you for putting this together... I need to make better use of my shop space, so I got your PDF "tool" to help layout your shop... It's really nice that you have a lot of common tools measured out. One critique: The floor plan grid was too light for my printer so I drew up my own on graph paper at 1/2" = 1' scale. And of course I needed to measure out the locations for doors, windows, electrical, and custom made items, so I made some cutouts for them... And after I got all that jotted down I immediately began working on rearranging my floor plan... except I'm finding out it's a floor "pain"... LOL. What I've got for a shop area is an enclosed patio space about 12' x 22' so it's probably the size of a 1 car garage. Also the kind of DIY projects I work on aren't your typical workflows, I don't really have specific kinds of projects... it's whenever I need something made, and the shop can be idle for long periods of time too. But I love having the shop when inspiration strikes to have it ready to go and be useful! So if I am put in a category: it is weekend DIY'er.

@user-rn4ss4tj2d 8 месяцев назад

man u deserve a sub. thanks

@christopherlamoureux8617 Год назад

Congratulations on the new upgrade. Those throwback clips also warrant a congrats on getting healthier. You can see that your life has been improving all the way around. Keep up the hard work, your killing it 💪 👊.

@domoniccampbell4051 Год назад

I am beginning to believe you wanted to be an inventor. Your vision in impeccable. Keep doing what you do 💯💯

@domoniccampbell4051 Год назад

This real???????

@petenelson8136 Год назад

This is awesome!! I'm building a house (they just started cutting the 1200 ft long driveway last week) and it will have a 16'x33' woodworking shop. I've been trying to use Sketchup (long learning curve) to design my shop and failing. This old school method of layout is exactly what I needed. I'll be meeting with my electrician in about a month to go over where all the electrical goes, and I kept agonizing over getting it right for my tools. Knowing I put the 240 volt outlets in the right spot, especially the one in the floor for my table saw (getting a SawStop) is important to me. Being on a slab you've only got one chance (unless I wanted to tear up the concrete) to get my floor connection done right. Thanks for putting this out, and thanks for the content of your video's. I became a subscriber about 6 months ago and love how you teach the skills you know. I did some woodworking about 15 years ago, and now that I'm retired I'm looking forward to getting back into this, and passing my knowledge on to my 8 grandkids.

@danwilkening888 Год назад

Pete i will be doing the same thing in a little over a year when I retire. Going to use the layout tool for the exact same thing.

@glittalogik Год назад

TheSketchUpEssentials got me started - it sucks to learn without help but once you've been set on the right track it quickly starts making sense! Here's Pt. 1 of their SketchUp For Woodworkers series: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-u80grW1zjOw.html

@alexwbakker Год назад

i super recommend you put channels in the slab that have metal covers. then, you can string permanent wires in conduit in them, as well as extension cords.

@petenelson8136 Год назад

@@glittalogik Thanks for the tip on SketchUpEssentials. They've got a learn SketchUp in 30 days series that I've been binge watching, and learning a ton.

@petenelson8136 Год назад

@@alexwbakker Thanks, I never considered channels. I was looking at putting in conduit under the slab and having outlets in the floor (well actually in boxes above the floor so dust wouldn't get in them). Channels with metal covers may be a better solution, though I'd still be concerned about dust collecting in the channels.

@windfirewoodwork Год назад

This is great information! As someone just getting started and working in just shy of 100 square feet in a shed with an extension cord powering everything, I really resonate with the importance of shop layout!

@mariushegli Год назад

I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.

@cyberkender1949 Год назад

A set of templates for Visio would be *really* awesome for laying out a shop...

@markpuente5569 Год назад

Jonathan, awesome job with the layout tool. It’s fantastic to get this experience share and I will use the tool so I can long range plan for shop growth. I hold classes in my work shop and this tool helps with safety clearances for each work station. Thanks!

@fcschoenthal Год назад

Thanks for always coming out with such great tools for the shop and great videos. Looking forward to some of the next offerings. - Chris

@jamesstoffel6835 Год назад

Great layout! Can definately tell some thought went into the 'process' of future wood working - something to learn by. Thank you for the free tool, as I can now assess my shop for the best 'work flow'.

@merlinsatrom6678 Год назад

Fantastic planning and layout Jonathan! Very helpful!

@GregsGarage Год назад

Looking forward to the router plane!

@cattleNhay Год назад

I have 3 bandsaws lol…normal size, big, and omg. Spent a total of $171 for all 3 and they work perfectly. Can resaw up to 25” thick.

@sanyoshovah2887 Год назад

I just started getting things for my own workshop. I had 500 square feet at my disposal. Now I need to move everything into a 150 ft room and I have no idea how to set up my workshop in such a tiny space.

@neilcarter6543 Год назад

Thank you Jonathan, I am moving to a new-build bungalow with a double-garage next year and your layout planner is exactly what I need.

@scott1099 Год назад

i call this style the paper doll layout - did this type style layout for a co i worked for over 30 years works great don't forget to add walk around area and door swings if applicable

@jaylockwood2337 Год назад

Hey man, I've been watching your stuff for a couple years now. I just stumbled upon an oldie from 2016 -center keyed box joints. You have been creative and hustling for years! You are talented, and you are killing it man! Congratulations, and please keep making this great content.

@williammrdeza9445 Год назад

Good considerations for shop layout, Jonathan. I've been hoping you would come out with a small brass mallet--can't wait for the pre-sale on that! Looks like your new shop will keep you and the crew busy for some time, making it your own. Love your content--keep it coming! Thank you.

@WoodworkJourney Год назад

Congrats on the new shop!

@Grampiswoodshop Год назад

I did the layout yesterday. It enabled me to tweak a few things, freeing up up a lot of space. Thanks!

@5zwoodworks Год назад

Kudos to you. Keep up the fantastic work.

@joshuagrafton8781 Год назад

It is coming together. Love it

@MCsCreations Год назад

Brilliant idea the miniatures, Jonathan! 😃 Your shop looks sweet! Stay safe there with your family! 🖖😊

@peakhour Год назад

setting up a new woodshop right now, timely advice, thanks.

@petemelendez710 Год назад

Love the layout thankyou

@darthstewie76 Год назад

I'm ready for the router plane!

@RussThacher Год назад

Shop setup is something that I'm constantly struggling with. The shop that I have is about 350 sq ft and already had benches with cabinets built around around 1 full wall and part of another. The other speedbump I'm hitting is the ceiling is only a little over 9 ft tall. I'm still building my tool collection so I've had to be very creative but I'm thinking it's time to rip out the benches and cabinets to start over with something that fits me better.

@EvanDunville Год назад

First of all, Excellent video. Second I bought a stop block from your sale and a kids shop apron. I really like when manufacturers offer seconds. I'm more than happy to have something even if it has a scratch since I'll be using it and adding my own dings anyway.

@MD-en3zm Год назад

Agreed - most of the time I can’t even find the blemishes, and anything I buy will be “blemished” in no time anyways.

@joey1092 Год назад

U r my hero. I am in the early planning stages of reorganizing my 1.5-car garage wood/metal shop. You have me some good ideas, thank you.

@joey1092 Год назад

I love when I check out your profile you have no videos posted. Get a real job scammer. we should scam your parents out of their money.

@MH-qq3kj Год назад

Great idea! Just wish I had room to set up a shop. Thanks!

@guybowers9094 Год назад

I'm currently in the process of setting up my 760 sq ft shop and the templates will be great to help with that. Always look forward to your videos as your presentation and teacher style is of great help

@TheToolnut 9 месяцев назад

I have approximately 850sq ft and finished working on the outside around a month ago. Half of the inside is uninsulated and unsheathed. Once I get that done I'll be installing a load bearing beam around 16' long where the back wall of the original workshop was. I built it in two phases because of a limited budget and time constraints. It will be open plan then with two five foot wall sections for storage cabinets and tool racks. It's my second workshop build and one thing I've learned is to put all my machines and benches on castor's. The ability to be able to move things around at will is key.

@russelltherealestateguy7527 Год назад

love your new space

@russelltherealestateguy7527 Год назад

I am so psyched i never win anything. Thank You !!

@bradleytuckwell4881 Год назад

I’m still trying to get my shop to flow so thanks this has been helpful

@What_Other_Hobbies Год назад

Looking forward to the router plane.

@johnhammernik6008 Год назад

You mentioned you were going to build a work bench. I would love it if you would take some time to explain the decisions you made with respect to overall style, height, vises, and work holding options. I am right on the cusp of building my first true woodworking bench and I find my style very similar to you with regard to the balance you strike between hand tools and power tools. There are a lot of videos out there but not many people explain why they made the decisions they made, so I can choose if it will be right for me. Love the channel, and thanks for doing what you do!

@davidpalmer5166 Год назад

Thanks, I'm gonna put my shop on it and see if I can improve.

@dougprentice1363 Год назад

Grizzly also has a tool where you easily draw your shop shape. Then you can drag and drop tools in. Move, rotate. Save it. Works really well.

@sandmandave2008 Год назад

Grizzly's shop planner has been down for almost a year. Their web site says coming soon, V2 shop planner. Just checked, still not there.

@dougprentice1363 Год назад

@@sandmandave2008 I didn't know. I last used it many years ago.

@sandmandave2008 Год назад

@@dougprentice1363 I was checking every month. I wanted to use it so badly.

@Flippingdrawers Год назад

So cool 🤩

@peterbarlow8912 8 месяцев назад

My Pratt Institute graduate grandfather cut hinged flaps into his small shop’s vertical siding for long out-feeds.

@JerkDogJ Год назад

Still need to check out this vid, definitely good timing since I'm moving from a backyard to basement shop. Anyway, was just thinking, it would be awesome to see you guys develop a saw/chisel guide to compliment the dovetail jig I have. I know the 90 is built into the dt, but like 45, 30, maybe 22.5 for some flag boxes. Anyway, you rock, keep it up.

@woodworkingandepoxy643 Год назад

I can't seem to find the video where you were talking about the non profit you started for disabled woodworkers so figured I'd post here. I wish there was something for someone like me for that. I'm 39 and have a lot going on. Osteoarthritis, degenerative disc disease, my left leg has issues with blood flow so a bone called the navicular in my left foot basically died and is dissolving. But In my state and my age none of this is considered a disability. Being a woodworker for many years I'm afraid it's getting to the point I won't be able to do it much longer because of things like not having a planer or jointer and having to be on my feet for way longer than I can be to hand plane. Its sad that the tools that would allow me to actually get back to doing what I love full time are so expensive. Since my state doesn't consider any of this a disability I don't get disability. And I've seen your program and a couple others that requires paperwork that I can't get because, it's not considered a disability. Even though I can't be on my feet longer than an hour without days of debilitating pain. It just sucks. I wish there was more kind people out there or more programs that would be able to help me.

@psguardian Год назад

This is literally how I have laid out my home & garage space for 25yrs lol.

@MichaelDinsmore Год назад

Thanks for the nice video. But I digress… I wanted to thank you for the free the plating tool printout on your website!

@mikegoff7506 7 месяцев назад

They dont get the chinook wind effect from the Black hills. I forget the year, but Spearfish went from 20 something below zero to 45 above zero in 5 minutes, then set another record that same day when the sun set, temp dropped back to -20 in 2 minutes. Good place to freeze dried coffee

@againstthegrainwoodworking Год назад

Thanks Jonathan. My problem is I only have a 288 ft.² shop with enough tools to fill a 1000 square-foot shop. But I still think this too will help me thank you again.

@jenniferwhite6089 Год назад

i have done this with my farm too as to machinery buildings bought toys and farm machinery to see the best way to plan it out too I was not the only one who had the input of the plans too it has paid off had all the groundwork with all of the utility in place too then the foundation to the building too i have the plans when each plug-in in the machine shop is to totally overkill this but we had a problem with one bay in the short time we had it figured out pull new wires to the bay and it was fix the old wire was pull out too

@kentboogert1217 Год назад

The free tool is great!! I'll bet a lot of use sketchup to design projects. Maybe you could make these available as sketchup components. At least in 2D free and maybe 3D for a fee!!!

@timothytorpy4837 Год назад

I built a over hang off my single car garage. This is where I would like to store my lumber. Any advice on how to try and keep the moisture down. Or would that be a big issue if it’s not rained / snowed on

@awhite55grands Год назад

May have been asked & answered already, but I gotta know- what’s the big circle grid stand thing? I’m way past beginner, just this side of intermediate, watched hundreds of woodwork tutorials and that’s the first one I’ve seen. Intrigued.

@mattkonrad511 4 месяца назад

The book provides clear illustrations ru-vid.comUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO diagrams that cover many of the essential topics. The projects at the end of the book are valuable for enhancing your skills and creating your own furniture. A digital platform linked to the book that could offer the plans for other woodworking projects with the cut sheets would have been a nice addition, but overall, the book is excellent.

@idocobarry Год назад

Good video discussion. One criticism...the coffee cup on the table saw...the horror of it 😱 (And yes. I know it's not on the cast iron top part. Still...)

@bhartissimo Год назад

When will the router plane be available for purchase?

@patrickguest2762 Год назад

what's that hold down clamp on the moxon vise bench?

@metzessible1271 Год назад

All that graph paper... How much room around the demigorgon do I need for my table saw?

@Toddicus2914 Год назад

I really want to know what the other 13,500 sq ft is used for.

@aarongay4300 Год назад

Bro! My shop is a 140ft sq ft "fancy shed" with and extension cord going to it lol

@acille7232 Год назад

Wow, paper dolls for boys.

@wittworks Год назад

Great idea! And great shop! Congrats on the space. Now stop ripping off Tamar’s stopblock.

@EricMeeks101 Год назад

I would do anything to have a decent sized shed in my backyard to house my woodworking tools. I just bought my first house, and while I’m very grateful for the house, I have no room to pursue my passion in woodworking :(

@Belizzle Год назад

I stopped paying attention and just got excited when you said you were going to be releasing that router plane!

@cameronburry2275 Год назад

You should build a Roubo workbench that puts Matt Estlea to shame.

@Gabe-vu9lj Год назад

Does anybody know of a software that will let you easily size images to a scaled dimension?- like paste an image, apply a 10’x10’ dimension to it at a 1/4”=1’ scale?

@GibClark Год назад

👍🏻👍🏻👍🏻👍🏻

@markduggan3451 Год назад

That shop planning looks great but my "shop" is 12' by 8' and I need the middle free for my wheelchair, so I'm just putting tools where I can lol.

@sandmandave2008 Год назад

The shop layout page will not let me add it to the cart using FireFox. I tried Safari and the links and comments won't even load. Great video though. I did the best I could laying out my shop without any layout tools. I'm installing a mini split heat pump now and am somewhat committed as I finished most of the electrical work except for the 240 coming down a yet to be placed 6x6 pole for a 4 tool island (band saw, planer, jointer, drum sander). It would be nice to verify what I've planned so far will work. Even with a 1050 square foot building with a 10 x 12 office is included, things might be tight because of my 5 x 10 CNC.

@katzmosestools Год назад

FYI it's worked for 2,487 other people so far. Try chasing your cache

@sandmandave2008 Год назад

@@katzmosestools Turns out my old Firefox browser on an old Mac did not like your free files. It worked for the paid stuff. I was able to download it just fine on my new computer. Thanks. I'm going to be ordering more plans as soon as the shop is done.

@Outcast1016 Год назад

To have a shop that size, 99.9% of us will never have

@BentusiProgenitors Год назад

I've got 65 sqft...work pretty well.

@crazycdn8327 Год назад

Awesome content, I've bought some of your stuff in the past and have future plans. Thanks for the free PDFs! We moved into a new house that comes with a 3 car shop (about 2000 sq ft) and this will help with layout once I insulate it and get the useless car lift sold and out!

@XxMalabooo Год назад

The jimmy kimmel of wood working

@1RAH Год назад

What about 130 square foot shop lol I have all of the same tools in that small a space

@rla1000 Год назад

If I had a space the size of an Amazon warehouse I wouldn't need you to tell me how to lay out my shop.

@NicBock Год назад

Katz-Moses router plane... looks strangely exactly like my new Hongdui router plane... I must say that's a good plane

@katzmosestools Год назад

We developed them together and are going to be doing a series of 6 tools together

@IamSpectre2020 Год назад

It's great to see your success and expansion but for most of us hobbyists which I assume, most of your viewers are, we are not looking for info on big shops. There are too many that do this just for RU-vid cash. Many that I follow and find informative, but they are not being truthful like 3x3, she does it strictly for RU-vid content, Stumpy has even built a second shop to keep the studio shop as a makebelieve woodworking shop but his info is also interesting the whole game is just deceitful and not what 90% of the hobbyist are looking for. Hobbyists are looking for other hobbyist and their ideas, projects, mods etc. Maybe I am wrong but I don't think so.

@russelltherealestateguy7527 Год назад

Seems I am being approached by a scammer that says I won a prize for commenting on this video. Says I won a magnetic drill and is asking me to pay $85 for the shipping.