How to set up ANY BNF FPV drone 🛠️🎓

Подписаться 61 тыс.

Просмотров 54 тыс.

50% 1

So you just bought the latest/greatest BNF drone.... now what? In this video, I outline the steps I take when I get a new drone to get it ready to fly.
If you like this kind of tutorial content, consider becoming a Patron and support my channel to receive these videos in advance of everyone else...
👉 / albertkim
The PNP drone used as an example in this video is the Phantom Toothpick. See the review here - • BEST TOOTHPICK? 🏁👍
🚁GEPRC Phanton Toothpick - bit.ly/2Xr09Co
💲Use coupon code BGgeprcAK for 12% off! ($114)
💬 Join our Discord Community - / discord
🛒 Check out my Amazon store FAVS
www.amazon.com/...
🎁Additional giveaways just for Patreons!
💲 Banggood Coupons: toyho || toysho
184350 8%OFF exp 2019/6/26
►BG Flash Deals - bit.ly/2Ulf10c
►Banggood App - bit.ly/2Ul7Sgz
▼ RC Gear
Jumper T12 Plus Transmitter - bit.ly/2XDUt5p
FrSky X-Lite Transmitter - bit.ly/2IV3cg3
Fatshark Dominator V3 Goggles - amzn.to/2eY6dhF
OwlRX Receiver Module - bit.ly/2Xc9BGi
Menace Bandicoot Antenna - bit.ly/2UjEKX2
Foxeer Lollipop 2 Antenna - bit.ly/2P3Lchg
Triple Feed Patch Antenna - bit.ly/2P1wMyq
▼ Batteries
525mah 1S HV - bit.ly/2WhPjL5
450mah 2S HV - bit.ly/2WhOlyv
520mah 3S HV - bit.ly/2Un3UnB
▼ Tools
Awesome & Cheap Tool Kit - bit.ly/2U2CS4G
Xiaomi Electric Screwdriver - bit.ly/2OBa9k3
Cloth Tape - amzn.to/2JpCx5U
Hakko Soldering Station - amzn.to/2Pn5J1v
TS100 Portable Soldering Iron - bit.ly/2WybP2w
63/37 Solder - amzn.to/2De9rsz
Smoke Stopper - bit.ly/2WybEUU
▼ My Favorite Micro Drones
GEPRC Cygnet CX3 - bit.ly/2TUvFUm
KingKong ET115 v2 - bit.ly/2U1xkHy
EMAX Babyhawk-R PRO - bit.ly/2TUL0Eg
GEPRC Phoenix 2.5 - bit.ly/2TRpobW
Diatone GT-M3 - bit.ly/2TVaykL
▼ My Favorite 5-inch Drones
HGLRC Batman220 - bit.ly/2TOUfG6
Diatone GT-Tyrant 540 - bit.ly/2TVzTLA
EMAX Hawk 5 - bit.ly/2TU1ixr
▼ Camera Gear
Sony RX100 Mark V - amzn.to/2xpZk0c
DJI Osmo Pocket - amzn.to/2Q5xGiv
DJI Osmo Action Camera - amzn.to/2W2Btvr
GoPro Hero Session 5 - amzn.to/2xpwBsj
Hawkeye Firefly 8SE 4K - bit.ly/2PmYvdH
Samsung Galaxy Note 8 - amzn.to/2wTF4lW
▼ My Camera Drones
DJI Mavic Pro - amzn.to/2wTIzcg
▼ Other Fun Gear
Xiaomi M365 Electric Scooter - amzn.to/2qFHH71
Zhiyun Smooth 4 Gimbal - amzn.to/2Dg4Jc7
▼ My FPV Camera Review Rig
• Micro Night FPV with O...
My video editor - amzn.to/1VJHWp7
My editing PC - amzn.to/2MhlR3g
👉s u b s c r i b e - bit.ly/2QH0OZt
💰 Latest sales and coupon codes
🐦 / albertkim
🎁s e c r e t g i v e a w a y s
/ marblekit
💰 d o n a t e
Donate via PayPal - paypal.me/marbl...
Bitcoin - 12Y5vysDMvgqX4Z7h7iRTsgwWoCNwv9MPs
Ethereum - 0xD8f3758678F3d93539F804e36811f0A04B0D047F
Litecoin - LcyGPS2f3NZxWU6BRkCJ5qdk1zV6jUCtn8
👉PLAYLISTS
FPV Camera Reviews - bit.ly/2Nb9WIh
Micro Drone Review - bit.ly/2O2FTOH
Frame Review - bit.ly/2O48KSU
Quadcopter Builds - bit.ly/2O55ypY
Tutorials - bit.ly/2NYJy01
Haul Time - bit.ly/2O2Hkwz
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
#DroneSetup #BuyingDrone #DroneTutorial

Опубликовано:

27 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 123

@AlbertKimTV 2 года назад

@GoodkatNW 5 лет назад

Thank you SO much for this! Astounding how little documentation there is with the majority of BnF drones

@AlbertKimTV 5 лет назад

I'm amazed how little this video gets watched...

@patrickcurram9763 3 года назад

It’s sad ! It’s like they don’t want people to enjoy it

@mece66 5 лет назад

Those motor wires are gorgeous 😍

@h-dawg969 Год назад

I’ve just bought a Bind n Fly Bob57 from iFlight after flying Dji fpv for about a year n half and Avata since November. Literally well excited and I’m sure this video will provide invaluable information. It’s mental how little info is out there. Due to me coming from Dji, everything is so simple with regard to charging batteries , binding and getting in the air. I know once I’m up n flying I’m guna be loving it! Cheers!

@frankcastillo8869 3 года назад

Another great tutorial video. Thanks.

@AlbertKimTV 3 года назад

Glad you liked it!

@trevorimpulsebuyguy6398 3 года назад

Great video I wish I had this when I started , I learned the hard way of course.

@AlbertKimTV 3 года назад

Thanks for watching!

@patrickcurram9763 3 года назад

They really need to make a Series for people just getting in this is so complicated for anyone trying to get into the sport

@4kdemoscene 3 года назад

You are a fantastic teacher! Thanks.

@harrytmurphy8438 4 года назад

Thank you Albert. Excellent video! Keep up the good work! Just a thought, I have a simple button switch set up on the bench between the battery and the quad which allows me to easily connect/disconnect the power to the quad. I use this for testing on all of my quads as it provides an effective method to control the power source. Great for binding. Thanks Again!

@donphobos 4 года назад

Very good video, I will double check my quad accordingly.

@lennysimmons6649 4 года назад

Excellent setup video. I will definitely use this on my current and new models

@AlbertKimTV 4 года назад

Glad it was helpful!

@p33treekRipAir 3 года назад

Hello y’all I have the nazgul5 and the spektrun DX-6e remote and I’m having trouble binding them together, any help would be appreciated

@joedrift3235 3 года назад

I’m having the same problem with the nazgul5 v2 did you find the solution

@ernest_4104 3 года назад

Thank you Albert!

@RobertoCamachoNoellySerrano 5 лет назад

Love your work by the way, im new to FPV so im soaking it up. Want to learn as much as i can

@MCsCreations 5 лет назад

Fantastic, Albert! Thanks a lot! 😃

@luke95media 5 лет назад

Hi Albert did you know if the geprc toothpik can handle an 30g HD cam? Or It have low esc

@AlbertKimTV 5 лет назад

It will probably fail eventually. It's too much weight.

@joedrift3235 3 года назад

Hello I was wondering if I could bind the beta FPV lite radio 2 with the nazgul 5 v2 frsky?

@AlbertKimTV 3 года назад

yes

@joedrift3235 3 года назад

Thanks for the quick respond but I am trying to bind but for some reason it wont. The receiver is flashing red and a solid green, when i press bind on the transmitter it wont bind.

@chrisgonzalez7641 4 года назад

I have a v95ohd lost original receiver but I have a sky rider receiver can I connect it the drone

@ethannf502 5 лет назад

This is so cool! This is beautiful

@neehooya 4 года назад

Thank you Albert for this very informative video, appreciated. Will I be able to bind Tinyhawk to a Spektrum receiver?

@AlbertKimTV 4 года назад

I think it is possible to add a spectrum receiver but I don't have any of that gear so never tested it.

@neehooya 4 года назад

Gotcha, thanks Albert.

@oddarntnes7079 3 года назад

@@neehooya did you do it?

@christophervergara2254 5 лет назад

Hi Albert do you normally set up all your models to the same vtx band/channel? Or is best practice to have all models on different band/channels? Any advice would be greatly appreciated. 👍🏽

@AlbertKimTV 5 лет назад

I fly same channel on all my quads.

@christophervergara2254 5 лет назад

Thank you sir much appreciated. 🙏🏽

@mongofpv3744 5 лет назад

Acrobee lite DSM with jumper t12 Set up transmitter shows in beta flight set up arm switch , still does not arm , works with acrobee v2. Help please would like to be able to fly it had for 6 months , set end points to newbeedrones RU-vid instructions , Thank you !

@frankbarajas 5 лет назад

Hi Albert, Shouldn't one of the first things that you do after bind and connecting the FC to you computer is to save the CLI Dump / Diff All configuration settings before making any changes to BetaFlight? That's not a big issue as much these days since one can usually find someone who has the same dump file or the manufacture will often post it as well, but sometimes it can be a pain if you "nerf" the setup and have go looking to find a cli dump. (Tip #139 on how I learned the hard way...lol) *This is a very good and quick intro setup to anyone just starting out.*

@AlbertKimTV 5 лет назад

There's probably about 20 more best practices that could have made it into this video but I've decided to keep it simple for the beginner crowd. There are plenty of other video creators that will make the two hour video but that will never be me. Ten minutes or less is my motto.

@frankbarajas 5 лет назад

@@AlbertKimTV - Good point, less than 10 minute is good. However, as I said, it's no longer that big of an issue since usually one can find a copy of the dump somewhere anyway.

@AlbertKimTV 5 лет назад

Yep, that's another reason why I didn't bother to include it in this video. Most beginners will freak out when they see the CLI... LOL.

@frankbarajas 5 лет назад

Albert Kim - True dat! CLI scares the crap out of a lot of people, but right now it’s a necessary evil, like the primary system in U.S. Politics.

@franksura134 5 лет назад

So is there a chart that tells you you the identification of the band's you are on? Example you set your vtx to band 5 which is race band? How can I identify band a or e or the rest? Thank you

@AlbertKimTV 5 лет назад

See this ==> bit.ly/2TDLXAL

@ipilllsvps4related949 3 года назад

I have a zero gravity x1-hd but i lost the instructions and can't figure out how to connect the drone to my controller they're both charged but i don't know how to connect them

@AlbertKimTV 3 года назад

Sorry, I don't know anything about that model.

@RobertoCamachoNoellySerrano 5 лет назад

Tinyhawk s with qx7

@sebastrianw.4673 4 года назад

My throttle value is at 1000. How do I reduce the value? Also my GEPRC Phantom will not arm. Installed my flysky receiver and it is responding but quad will not arm. Flight mode switch is working fine. In the modes tab it is given me a red color on the arm box

@AlbertKimTV 4 года назад

You need to adjust the min throttle value to something higher than the lowest value (in your case 1000). So make it like 1010 and then it should arm.

@sebastrianw.4673 4 года назад

@@AlbertKimTV ok thanks

@quadtimemedia 2 года назад

I'm trying to get my e8 transmitter and dji v2 goggles to bind to my emax babyhawk 2 hd, I have the nebula cam pro frsky d8 version and I'm having the worst time getting them to bind, any suggestions?

@AlbertKimTV 2 года назад

Check out this video to see if it will help... ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9O0N-VZEHuw.html

@dcsmith5839 5 лет назад

Hi,good video.How about Spektrum?

@sebastrianw.4673 3 года назад

Hi Al, I think I'm having a loss of connection to my flight controller due to the pin connection in the flight stack on this quad. Do you known if there is something I can do? When I lift off and hover I'm good until I throttle up or hard, then the quad does this silly flip to the backside and goes down like a loss of power. Any help would be greatly appreciated. Keep it in the air bro.

@jonjepson3650 5 лет назад

Thanks for this Albert. Perfect timing as I will be attempting to bind a tinyhawk s to a jumper t8sg. Will I need to assign the arm and mode switches to channels 5 and 6 on the jumper before I go to betaflight. And do I set the switch as simple or complex. Also the jumper has two frsky options, which one do I need to use.

@AlbertKimTV 5 лет назад

I plan to make a generic transmitter betaflight setup video. It won't be transmitter specific so you'll need to know how the buttons work on the T12. I already made that video in the review.

@jonjepson3650 5 лет назад

No luck with getting the tiny hawk in the air. I should have got the ready to fly version. I think I will put it on eBay

@paulpark4899 5 лет назад

what kind of chaarger do you use for xt30 plugs

@AlbertKimTV 5 лет назад

I use iSDT chargers and and XT30 to XT60 adapter.

@paulpark4899 5 лет назад

@@AlbertKimTV thanks!

@boratsagdiyev1586 5 лет назад

Nice, i've got the same TX but i use only R9MM for Fport. I've ordered another quad and another R9MM so i already wondered if i could bind to the same profile and keep bind of the existing one :)

@itamar_farkash 3 года назад

Didnt know borat flys fpv lol

@boratsagdiyev1586 3 года назад

@@itamar_farkash yeas i like very much high five

@CD-rt8wj 5 лет назад

Thanks for the content as always! Do you have any thoughts on people saying there's lower latency in D8 mode vs D16? Do you tend to flash your XM+'s with RSSI on 16 or 8?

@AlbertKimTV 5 лет назад

I flash the RSSI 8-channel firmware. I don't notice any difference in latency between D8 and D16. If anyone can show proof of a latency difference that normal people can tell (not some oscilloscope), please let me know where to watch that video because I don't believe it exists.

@CD-rt8wj 5 лет назад

Albert Kim thanks for the reply! this is what I was thinking as well, seems like fewer channels would mean less info to process and shorter loops but can we really perceive that small difference in frame rate? Not convinced haha. Also, using your sailfly and 349 tunes and they're top notch 👌🏼 all I have to do now is add smart cell profiles

@teshm2731 5 лет назад

Hey Albert...Whenever you have some time,would you mine give me guide on how to setup my jumper t12 to a simulator (example) Freerider...Thanks in advance...

@patrickcurram9763 3 года назад

I have a hx 115 and I can’t seem to bind it to my dx6e ? I’ve bonded many bnf’s but this one is an ass ! Want to fly it so bad

@AlbertKimTV 3 года назад

Are you sure it has a compatible receiver? I don't think they sell those with spectrum receivers...

@patrickcurram9763 3 года назад

@@AlbertKimTV soooo you made me think lol I checked and found it has a frsky 🤦‍♂️ oh well always wanted a backup transmitter lol I could swap the receiver but I want my opinions to be better so why not have both

@patrickcurram9763 3 года назад

@@AlbertKimTV thanks btw

@rolandburrows4859 5 лет назад

Albert, is it possible to send me your taranis model bin please? Thanks

@rayv882 2 года назад

What kind of drone is this in your video?

@AlbertKimTV 2 года назад

This one... ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-f8HurIX1DuE.html

@javieruriel 4 года назад

Where did you get that drone?

@AlbertKimTV 4 года назад

bit.ly/2Xr09Co

@wkduff 3 года назад

even with your video I cannot bind, I'm getting frustrated, xnight360 with a betafpv both frisky, will not bind

@AlbertKimTV 3 года назад

Which frsky receiver? Which transmitter? Is the transmitter in the same mode as the receiver? There are several modes a Frskry receiver can be in. D16, D8, D16-LBT, D16-EU, etc... I need more information.

@wkduff 3 года назад

@@AlbertKimTV thank you, I figured it out, just had to hold the bind button down longer than told to. Now I just got to figure out how to stop the darn propellers from flying off the unit. Scared the hell out of me lol

@dylanwalker1205 4 года назад

Ok so if i purchace the GepRc BNF Can i just bind it out the box with flysky fs-i6?

@AlbertKimTV 4 года назад

If you got the flysky version... you didn't specify the version you got.

@dylanwalker1205 4 года назад

@@AlbertKimTV Ok i changed my option now anyway, im getting the SKYSTARS Skylord it comes with the compatible Frsky transmitter :)

@franzferdinand1 4 года назад

I dont get any stick/switch inputs I have searched for it already but i only found out that my receiver wasnt in sbus mode Fixed that but still no inputs Maybe something worth to mention: when i go to "ports" i cant change anything i think At least not to what i think would be correct for the nazgul5 when i compare it to other videos... Pls somebody help me hahaha im about to throw this shit away (not funny) Having trouble with my bnf since i got it (1month at least) Today i finally got it to bind with my radio but as i said: neither stick inputs nor switches on betaflight My camera works as i can see with my goggles but thats about it Sry for my bad english and for that long comment Hope anyone can help me Thxxx

@karolvikt 5 лет назад

12% coupon is no longer valid

@karolvikt 5 лет назад

BGss9%rc 9% off

@agenciacr3a911 Год назад

hello! I would be very grateful if you answer a question that I have. I happen to be new to fpv, I have a radiomaster tx16s controller and I'm buying a Lumenier QAV-S JohnnyFPV BNF drone. It includes the new DJI air unit. From what I understand, the dji air unit 3 is just the video system for the googles and the drone's camera. The question is ¿what kind of transmitter can I buy? ¿Do I have to buy a transmitter separately?

@AlbertKimTV Год назад

Do you mean what kind of goggles? For the O3 system you need the Goggles 2 or Goggles Integra. You already have a transmitter (Radiomaster). If you're wondering what kind of receiver you need, there's a ton of options. Sounds like you need some extensive assistance. I offer help via chat for $50/hour. Let me know if you'd like to do that.

@dan71559 3 года назад

Hi Albert. I ordered a Gep phantom with xm+ receiver. I'm trying to bind to my Taranis Qx7. There are no lights on the receiver and the lights on the second and third boards never change. On the left side solid green and red with a flashing blue and towards the back a combination of green red and blue. What am I doing wrong?

@AlbertKimTV 3 года назад

Not sure what you mean by 2nd and 3rd boards, but it seems like you have a power issue on your setup. Might need to examine all your connections with a multimeter. Maybe there is a short somewhere or maybe you have a loose wire and it got disconnected. I'll need to see photos of all the connections to be able to diagnose.

@dan71559 3 года назад

@@AlbertKimTV Thank you for your reply Albert! Turns out it's actually a redcon r720x receiver. Dsmx. I have a dx6!

@acek100 4 года назад

MY PHANTOM DOES NOT ARM

@bensgreenpaint 4 года назад

Same tf

@acek100 4 года назад

@@bensgreenpaint I found out that it was because my battery was low lol

@karolvikt 5 лет назад

BGss9%rc 9% off

@jeremywylie3364 3 года назад

i have atomrc 135 pro without reciever ..i have a spectrum ar 400 . how do i hook kt up

@kidzudi7246 4 года назад

Hello I have a frotini f4 flight controller I recently bought I also bought a radio link at9 with the receiver that comes with it , I’ve connected it all up the transmitter I Ds to the receiver with powered with a battery but dose not arm I’ve also spends days on end trying to use beta flight receiver tab but I get no input on the sticks I’ve watched almost all problem shoot videos on RU-vid but still have no luck please CAN SOMEONE HELP????

@Chris-su5kx 2 года назад

Trying to get into fpv drones but don't know how to properly do this (The video is helpful but confusing to me (Not saying its bad or anything really good and explained well))do u know any fpv drones around the price 300-450 that is already setup and dont need to do this (If their are any more then that please tell) ik some drones like the dji fpv drone and the tinyhawk 3

@adamdrtina7261 5 лет назад

Hi, I wanna ask you some questions. I am new in fpv and I wanna buy my first fpv quad. I really like a star lord quad but geprc gep-mark2 looks also really great... What would you recommend me to buy? Also, I have a flysky fs-i6 transmitter... Could I stick with it (is it even possible to use this transmitter when I choose flysky receiver version on banggood?) or should I buy some taranis? Thanks in advance for your answer. Have a great day :)

@AlbertKimTV 5 лет назад

The GEPRC is very good. I haven't tried the Skylord. The Flysky will work OK. Try the Flit14+ receiver.

@adamdrtina7261 5 лет назад

@@AlbertKimTV wow, that was a fast response! Thank you :) I will go for it then. :)

@oscargalvao2815 4 года назад

Hey Albert, great video. I am having trouble with my cinepro/taranis x9 lite/r-xsr. I can see they bind as the light turns green. I connect to betaflight no problem as I see the quad moves, but when I go to the transmitter button, it is not recognized. Nothing moves, gimbal or switches. Please help. Thank you.

@oscargalvao2815 4 года назад

I've tried all the ports. Nothing.

@AlbertKimTV 4 года назад

Make sure your receiver is in SBUS mode and not PPM mode. This is a common problem with R-XSR receivers.

@robertp7209 4 года назад

I believe Albert usually changes the motor direction to non standard in BetaFlight, to avoid grass juice getting on the camera lens. Right there on the upper left of the Config page is where you indicate it, as “motor direction is reversed”. To change actual direction in ESCs, go into BL Heli configurator. I did the same on all quads, used to have to clean the lens after each pack. Never again. When using the config, the motors may show rotation not only normal, but a combo or normal and reversed, just change each one opposite to whatever is in there. Don’t forget to change the props accordingly. Need the battery connected when in the config. If not using the config, would have to swap by resoldering any two of three wires per motor.

@HattashFpv 5 лет назад

Good video! This was a very comprehensive tutorial! Quick question: When will the jumper t16 ship?

@AlbertKimTV 5 лет назад

It's already shipping

@Pet-Pizzazz-00 4 года назад

Thanks sir..

@whereasthepeople 4 года назад

Eachine trashcan flight controller and FPV what is the best

@AlbertKimTV 4 года назад

I don't understand what you're asking.... Is the Trashcan best for FPV?

@summergoaling2714 2 года назад

Can i put a 14.4 v battery in this Drone?

@AlbertKimTV 2 года назад

🤣

@lifeofappa4659 4 года назад

What was the point/benefit of changing the channel at the end? Is that how you changed it to 200mW?? Does it give you better signal?

@AlbertKimTV 4 года назад

I just changed it to the channel I use. You can change it to whatever you want.

@reviewmirror 4 года назад

Thanks, that helps a lot.

@lcdr.sealyt7951 4 года назад

I dont have a button

@harrynewman6532 3 года назад

what battery do you use for this quad?

@AlbertKimTV 3 года назад

I don't remember exactly off hand but I think it was a 3S 450mah.

@primitivocruz 5 лет назад

how was the fail safe set up

@AlbertKimTV 5 лет назад

No pulses on radio side, defaults on BF side

@mikbacitube 5 лет назад

Thank you Albert, simple and to the point no confusing yank abbreviations and well explained. I loved it

@dustinplee5067 2 года назад

Please help I am new to FPV and my drone is connected with my transmitter and receiver is connected but my drone is blinking and red light on the drone itself how do I fix it

@AlbertKimTV 2 года назад

I don't know. Not enough information here to make any sense of the problem.