No video :(

How to set up the CB09 Blade for the Cameo 4

Подписаться 7 тыс.

Просмотров 18 тыс.

50% 1

This video is specifically on how to set up the CB09 Blade for the Cameo 4 with the blue adapter -- this blade is an awesome alternative to the Silhouette Blades. I will link to previous RU-vid videos on what is the CB09 blade and to a video on how to set up a CB09 blade for a Cameo 1, 2, 3. This video is specific to setting it up for the Cameo 4.
Supplies:
CB09 Blade:
amzn.to/3aubzuz
Adapters:
amzn.to/3UJfiJs
What is the CB09 blade Video:
• CB09 blade Explanation...
How to set up the CB09 Blade for the Cameo 1,2,3:
• CB09 Blade Part 2 Sett...
Come Check out the web page here:
missmarysembroi...
Come check out all of my favorite crafty things here:
www.amazon.com...
My Favorite Places to Buy Fonts:
fontbundles.ne...
My Favorite Place for Blanks--Craft Chameleon:
goo.gl/d1dwst
These are links to items used in the video, by clicking on them & buying the items, I get a small commission to help buy more crafting supplies I use to make the videos. Best of all, it doesn't cost you any more!
Watching an ad or clicking on an ad helps pay the bills as well & is free for you!!

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 78

@judyblaise1639 3 года назад

I’ve used the CB09 blade for years. I love it

@MissMaryEmbroidery 3 года назад

I thought you were a CB09 fan too!

@eveningmistcreations8960 3 года назад

I'm a new Cameo 4 user. This has helped me in solidifying my choice to get a cb09 blade. Thank you.

@nanowomansk 3 года назад

You will like it! The blades last forever plus when you need to change you don’t cringe for spending $$$.

@MissMaryEmbroidery 3 года назад

I hope you'll be come a CB09 fan like the rest of us!!

@eveningmistcreations8960 3 года назад

I bought the blade and it arrived today. I have yet to use it since we are in the process of moving and my craft stuff is all packed away.

@sonnedsunshyncoordinations1717 2 года назад

Just got my blade after watching your video for months!! I need to cut faux leather-thank you!!

@Nekoandpiano 3 года назад

My CBO9 arrived yesterday. Works perfectly in Portrait 3 with blue adapter. I put ruler on holder which available as pdf in Internet and it's very useful. But i guess i will buy more holders just ti have different angle blades in different holders. I test cutting paper, rather intricate design and it cuts much much better then autoblade.

@MissMaryEmbroidery 3 года назад

Having holders of different blade angles is a great idea! I'm glad the number line worked for you, I've never even really tried with it!

@MissMaryEmbroidery 3 года назад

@@carolmcclure6204 there’s a blog post with a number line - paperpulse.blogspot.com/2014/05/calling-all-cb09-blade-holder-and-blade.html

@reacalingo7994 3 года назад

hello may i know how did you set up the cb09 blade with a blue adapter? i can't seem to do it because it doesn't show ratchet blade in the tool.

@Nekoandpiano 3 года назад

@@reacalingo7994in actions you should choose "cut" first, and then you will see blades in tools selection. It doesn't really matter which one to choose (just not autoblade)

@reacalingo7994 3 года назад

@@Nekoandpiano i chose cut but when i inserted the adapter with cb09 blade, the software is reading the blue adapter as pen. there's nothing in the tool to choose from except pen.

@msgloriaplunkett 2 года назад

Great video, thank you so much for sharing!

@MissMaryEmbroidery 2 года назад

Glad it was helpful!!

@dtees4783 Год назад

I purchased the blade from the link but it still doesn't fit in my blue adapter :(

@MissMaryEmbroidery Год назад

This video is over 2 years old now, so they are hit and miss when the fit now.

@mswashu Месяц назад

I just received the one linked as well but I'd ordered before seeing this video. I am able to squeeze it in but searching for different housing.

@beertuwalmyuziek9517 Год назад

hello im using cb09 blade. but it keeps scratching my stickers. any tips how to fix it?

@MissMaryEmbroidery Год назад

Either try shortening the blade length or don't fully insert the blade into the housing.

@smithfam5328 2 года назад

Thanks for the setup info-the blue adapter that came with my Cameo 4 looks just like that, but it says it is for sketch pens. When I insert it, Sketch Pen shows up as the pen loaded. It says the black is for the ratchet blade, should I use that? Or the gray adapter, says it is for deep cut blades.

@MissMaryEmbroidery 2 года назад

You can try the black blade adapter, from my experience it wasn't big enough for the CB09 blade. The blue one will default to the sketch file settings but you can change the settings in the second drop down box to cutting.

@smithfam5328 2 года назад

@@MissMaryEmbroidery thanks so much! Found the drop down settings for the blue. Works great!

@christinewhelan2768 2 года назад

Good evening . . . where do you get the adapters your put the housing in? I can't seem to find them on amazon

@MissMaryEmbroidery 2 года назад

They originally came with the cameo 4 machines, I’m not sure if they do anymore or not. They appear to be out of stock everywhere that I know to look. I included the link to them on silhouette’s webpage below. I do know there are some 3D printed adapters on Etsy, if you want to try that route. I haven’t tried any of them., but several have good reviews. www.silhouetteamerica.com/shop/TOOL-ADAPT-SET

@ENDO-G 7 месяцев назад

Is it possible to cut 2 mm Craft Foam?

@MissMaryEmbroidery 6 месяцев назад

In theory but I would be very careful doing so -- the Cameo 4 only has a 3 mm clearance, so between the 2mm foam & the mat there isn't a lot of room.

@FullaSugga 2 года назад

Thanks for this information. Is the link available for the CB09 blade that fits in the groove??

@MissMaryEmbroidery 2 года назад

There's a link to everything I use in the video in the description above. I have put my affiliate link to the CB09 : amzn.to/3aubzuz

@rositarojita76 2 года назад

The link to the blade says out of stock, is it possible to have a new link. I’ve been having the hardest time finding a blade holder that works with the adaptor. Thank you

@MissMaryEmbroidery 2 года назад

Looks like it is back in stock now!

@xChikyx Год назад

how deep can they cut? and which blade angle would be needed to cut thick 2mm chipboard?

@MissMaryEmbroidery Год назад

They can cut deep enough to break the machine, so be careful with them. I’ve never had good luck getting the cameo to cutting out chipboard, it normally just binds up & gets off track when I try.

@xChikyx Год назад

@@MissMaryEmbroidery yeah, it's what's happening to me :/ worst thing is that i bought the machine solely to cut chipboard :/

@netechindia 2 года назад

My cut using cb09 45° blade is not crisp and clear on vinyl need help My machine is cameo 4

@MissMaryEmbroidery 2 года назад

I would first start by trying to increase the force in the software to see if that can get you a better cut. Start with some test cuts with increased force slowly & see how that works out for you.

@netechindia 2 года назад

@@MissMaryEmbroidery I tried everything more than 50 trials with different forces and damaged my 2 blades as well but nothing worked out can you please send me the images of blade ( blade depth out ) through whatsapp or mail id ( in short a detailed information )

@netechindia 2 года назад

@@MissMaryEmbroidery maam which blade you are using with cb09? 45 degree or 30 degree

@xxsecretdreamerzxx 2 года назад

@@netechindia did you get yours to work? I'm having issues setting mine up too. I don't know if I should have my blade come out more or play with the force.

@netechindia 2 года назад

@@xxsecretdreamerzxx I bought CB09 blade set from Amazon and now it's working fine

@mirelescuestasgabriel837 3 года назад

Podrías decirme el diametro que tiene la cuchilla que si encaja en el adaptador? Así podría comprar la correcta

@MissMaryEmbroidery 3 года назад

CB09 Blade: amzn.to/3aubzuz That's a Link to the CB09 Blade that I used in the video, I would contact them for specific measurements of the blade. I hope that helps!

@jandexteradonis580 2 года назад

hi, does changing my blade depth still affects the cb09 with adapter to my cameo 4?

@MissMaryEmbroidery 2 года назад

I'm not sure I understand your question -- the plastic adapter that comes with the cameo 4 isn't related to the blade depth.

@kathy21361 Год назад

Where did you get the tubes you keep the blade and adapter in?

@MissMaryEmbroidery Год назад

They came with the blades when I ordered them.

@khark1224 Год назад

I have purchased two CB09 holders and neither of them fit my blue adaptor. One holder was from the same listing you have linked. Would you suggest continuing to order new CB09 holders until I find one that fits or look for another solution? I cut mostly paper and the Portrait 3 autoblade simply dulls too quickly if that aids in your suggestions.

@nicholeholcombe4227 Год назад

I had and problem. Ordered 2 from same seller. Neither fit. However I did kinda force fit it in blue adapter and it's working just fine

@khark1224 Год назад

@@nicholeholcombe4227 thank you for that info! I couldn't even force the one I received into the holder. I may order a few more in hopes of getting one that will work.

@MissMaryEmbroidery Год назад

Honestly that is probably your best bet -- make sure you can return them before you buy them.

@khark1224 Год назад

@@MissMaryEmbroidery thank you

@janipararokiasamy2542 Год назад

where can get the adapter other than amzn.

@MissMaryEmbroidery Год назад

You could try Silhouette America, Swing or any place that sells Silhouette stuff -- they may have them but they can be hard to find.

@SchnuffiJames 10 месяцев назад

will this work in a Silhouette portrait-3

@MissMaryEmbroidery 10 месяцев назад

It should work just the same -- I don't own any of the new machines, so I can't try it out to be certain.

@ivanriobla Год назад

is that amazon link for the cb09 blade is for the the one that fits ?

@MissMaryEmbroidery Год назад

It’s the one I bought for this video.

@ivanriobla Год назад

@@MissMaryEmbroidery awesome, thank you, great video

@nawabrahim2312 2 года назад

This holder graphtec ce6000 model suitable?

@MissMaryEmbroidery 2 года назад

I’m sorry I don’t know

@tanikobas6991 2 года назад

I am not sure how to position the blade itself. Do I have to take care if the tip of the blade is pointing towards me and or will it be setup by the cameo itself? I have no experience with ratchet blade so I don't know if I have to position it before.

@MissMaryEmbroidery 2 года назад

No you don't have to position it, the blade inside the black cover will move as the machine moves.

@dublintoo 2 года назад

I just found out about the CB09 blade. I got it from Amazon. Now I realize I need the blue adapter?? Where do I find that??

@MissMaryEmbroidery 2 года назад

Mine came with my machine when I originally bought it. It looks like they are sold out everywhere at the moment, I included the link down below to silhouette America's webpage. I know there are third party versions out there that have been 3D printed but I have never used one to give an opinion on one. www.silhouetteamerica.com/shop/blades-and-mats/TOOL-ADAPT-SET

@dublintoo 2 года назад

@@MissMaryEmbroidery I just found out they came with the machine. I think mine did too but I probably put it away thinking I'd probably never use it ....lol! Now because I want it I can't remember where I put it!! Lol!! Story of my life!

@MissMaryEmbroidery 2 года назад

@@dublintoo I do this too....going to put it in a safe place, so safe I can't remember where it is!! Hope you can find them!!