how to set up the Logitech G29 steering wheel on OMSI 2, ETS 2 and many more! 

And me, just started playing it again and there’s nothing more annoying than Lyft in your foot off the photo on the bus to Brake. I can’t seem to get them to work separately.

i tried that and it did not work. its weird because the game recognizes and sets up the pedals but they wont do anything when im in the bus.

@@realbboi have you turned on the steering wheel controling in the settings while being in the bus?

@@realbboi Exactly the same thing happens to me, aa trash game has a configuration that seems to be from the year 1990 and it doesn't even work well

What do you mean mate?

Electro Hazard Gaming basically, if I take me foot off all the pedals with the brake off, it rolls slowly oh flat surfaces

@@TheTransportExplorer is the bus in drive (D) by any chance?

On the middle right hand side on the controller tab (where you set up your wheel) on omsi there is a slider for how intense the force feedback is.

You have to press all the buttons, then they will show up

Uninstall g hub, and then reinstall it that may stop that issue, and no, g hub hub settings will not transfer over to console unfortunately.

@@maadswift is there another way of messaging you? I had the GHub installed, and then OMSI lost the settings for my G920.

Message me on discord Equilibrium.#9082

Ets 2 you can set up using the shifter, on omsi, you can only have a h pattern on the shifter and have to set up d,n,r on separate buttons, I have it on the 3 buttons at the bottom (share home options)

I have the same issue. Everything works perfectly apart from separating the throttle and brake. One pedal driving isn't natural.

Make sure in the G hub driver the throttle brake isn't combined

So my stopped working with OMSI 2. Pedals are not combined, and all of my settings are correctly placed. So my question is, why (when on OMSI 2 settings in the game) does my throttle work when it is brake/throttle, yet it doesn't work singularly?

@@duraab27that’s exactly what’s happening for me, and fair enough it’s ok on throttle break it’s not the best

@@masop-5759 I think updating the software and Windows versions and OMSI helped me to use my Logitech G29 properly. One problem left, most buttons will not work.

Levi Gamer same here and i dont now what to do

Reinstall g hub, it's a common bug

I have reinstalled it about 3 or 4 times already and it did nothing

@@levigamer2952try and delete temporary files that may help.

Make sure in the controller menu that inverse input is turned off.

Electro Hazard Gaming where about is that dude ? I can’t see it

It's next to the blue and white bar with the percentage in the middle

Perhaps delete temporary files then try again?

Have you made sure that the axis is set to be inverted?

Yeah, I cheked it. But it doesn't work.

Try deleting the g hub software, install it again and reconfigure it.

@@maadswift ok, I will try it. Thanks

@@maadswift Sadly, it didn't fix my problem, but thanks

You need to press the invert/reverse button when you are setting up your pedals and wheel

@@masop-5759where?

@@Godleg1 it’s next to were you say what ones the throttle it should be a box and at the top of the colom it should say invert

Firstly make sure the wheel is activated in the input menu, if it's activated make sure that the axis for throttle and brake are on your actual brake and throttle if that makes sense

@@maadswift In the settings I see the throttle and brake pedals work but in the bus not work. Clutch and steering wheel works

@@ainartalts2436 have a look in g hub to see if brake and clutch are combined

@@maadswift Yes. They are not combined

@@ainartalts2436 reset your bonds them set them again and see if that works

Make sure the power is on, on the mains

@@maadswift where can you do that?

The power lead, the plug you turn on on the wall, is that all working and plugged in

Plug the mains power in and turn it on at the plug

@@maadswift Yeah its in, I think its my LGS, Im just changing it to x64, not x86, I'll see how that goes

@@lutN if you a 64 bit system then yes, if it's a 32 bit system stick with x86

@@maadswift Got it working anyways, Works perfect, especially with the bumps on the road, Thanks for helping a bit

@@lutN No problem, that's what I'm here for

Disconnect and then reconnect the wheel from g hub and your computer, if it still ain't worked, disable the driver and re enable it again.

Electro Hazard Gaming also do I use the default profile or import omsi

Electro Hazard Gaming works also on every game apart from omsi

Have you made sure you've added the wheel into the active controller. 2 white boxes, move from left to right if that makes sense?

Electro Hazard Gaming yeah I’ve done everything

Reset g hub, then try again

Just done that and it Worked. Cant thank you enough THANK YOU!!!

Glad to hear!

Yes for it to work

Explain what happens

@@maadswift I got g hub to download omsi it did work and I got my money back from omsi I already had my contro attached to tourist bus simulator not when I go on it the wheel doesn't spin I have tried everything

Have you made sure the input is set on wheel and joystick not keyboard

@@maadswift Yes,the wheels is working only when i am in the menu of joystick(config menu) but when i click OK to come back to the game the wheel disables itself. I don t know why...

@@maadswift OMG is working now,in the right-down part of the screen there was a little menu on what to use Keyboard or Controller :)) Perfect now.

@@raoulraoul7129 good good

@@raoulraoul7129 What "right-down" part of the screen? Where exactly? Because I have the same issue now.. and I cannot find this keyboard or controller setting...