@@steeledreams2118 super nervous. I have my boards stained. With 2 coats of epoxy. I tried a test piece. Sanded 600-3000 then buffed and it’s kinda hazy. I don’t want to ruin my boards. Test piece was shinier before sanding and buffing
600-3000 is not going to work. I would go back to 800 then 1200. I buff 1200 every now and then again we’ll use 2000 but very seldom. We usually only go that fine if we are rebuffing an older paint job to remove shrinkage and general use problems.
