How to setup SQ5 Groups, DCA, Matrix and FX

Подписаться 5 тыс.

Просмотров 6 тыс.

50% 1

In this video I will deep dive into the Allen & Heath SQ5 digital sound console. We are going to take a look at how to setup groups, DCAs, Matrixes and FX, learn what the differences are an when you should use them.
0:00 - Intro
3:14 - Laying out the SQ5 mix bus
7:48 - How to send audio to a group on the A&H SQ5
12:46 - How to insert effects to a group
19:18 - What is double patching and how do you use it?
24:33 - Using a DCA on the SQ5
29:31 - How to use an Aux on an A&H SQ console
30:51 - How to use a Matrix on the SQ5 console
31:55 - What is an audio matrix?
------------------------------ My Gear -----------------------------------
Cameras
- Blackmagic Design Pocket Cinema Camera 6k
- Blackmagic Design Pocket Cinema Camera 4k
- Sony A6400
Lenses
- Sigma 18-35mm F1.8 (EF mount)
- Canon 17-35mm F2.8
- Canon 24 - 70mm F4
- Canon 24-105mm F4
- Canon 70-200mm F2.8
- Zeiss 16mm - 70mm
- Sony 18-105 F4
Audio
- Rode NTG 4+
- Rode Video mic NTG
- Allen & Heath SQ5, digital mixer
- Tasam DR 60D MKii, field recorder
- Zoom F2-BT, field recorder
- Sennheiser XSW-D, lav mic
Lighting
- Amaran 100X
- Apature 60cm Lantern
- Sokani X60
- Neewer 60cm Softbox
Sotware
- DaVinci Resolve
Any questions just leave me a comment or visit www.pluggedin-av.co.uk

Опубликовано:

7 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@WBCStudio. 2 месяца назад

Excellent video tutorial. I am learning a lot from you. Thanks a bunch. This mixer is very amazing, for it is highly customizable. I know that most of your tutorials applies to live events, however I can still relate to them even though I only use my SQ-5 in my recording studio.

@PluggedinAV 2 месяца назад

Great, glad they help 🙏🏻

@andygriffiths7230 2 месяца назад

The extra FX Returns are for if you want more than 4 FX Units as you can setup an AUX to be and FX Send. Just depends on how many Busses and Axes you need for your show. The use case would be if you did a FOH/ Monitor split system where you don't need to use your Auxes for wedges or IEMs at FOH as you have a dedicated monitor console to do all of that. So you could setup a layout where you can run 8 FX Send & Returns & 8 Sub groups if you want if the console is only doing FOH only.

@PluggedinAV 2 месяца назад

Thanks

@pogpogger4381 Месяц назад

Hey Andy! How do i assign the aux to be an FX send?? Thanks

@pogpogger4381 Месяц назад

HOW DO I DO THIS???

@andygriffiths7230 Месяц назад

@@pogpogger4381 ok so you go to your FX Return Faders & hit select you then assign and FX unit that you like to that return. you then hit the back panel button to the right of your touch screen. It will say that it's unassigned. Press that button & select the Mix/Return then it will show to columns. Scroll through the first one and find Aux then go to the 2nd column and pick which Aux you want to use as your extra FX Send. Done

@pogpogger4381 Месяц назад

@@andygriffiths7230 hey thanks for that

@bensonhon 2 месяца назад

Can u explain how to control the amount of dry signal when I insert a reverb to a group ? U mentioned about the FX send but it doesn’t mean I still get my dry signal right? What about using Fx bus and what’s then send fader doing? Is it just acting like a master level for all signals that are sent to the Fx bus, basically like a DCA? Thanks 🙏🏻

@PluggedinAV 2 месяца назад

Hey, I’m not sure I fully follow your comment but when you insert an effect you have a dry/wet control inside that effect unit. The ‘send’ fader controls the master send level to the effect unit.

@bensonhon 2 месяца назад

Thank u 🙏🏻

@lovefirst6157 2 месяца назад

can you do a video on how to use the compressor as a limiter and how to add a second compression on to the matrix if that is possible.

@PluggedinAV 2 месяца назад

Sure

@khanyaphaswana9531 14 дней назад

Is it possible to send a DCA to other mixes and not only Main LR

@PluggedinAV 13 дней назад

@@khanyaphaswana9531 no, a DCA doesn’t send audio it only controls audio faders as a group in the main LR mix.

@khanyaphaswana9531 13 дней назад

@@PluggedinAV thanks 👍

@pogpogger4381 Месяц назад

Hey, i do all of this but then when i go to the group the insert option doesnt come up! Any ideas on why? thanks

@PluggedinAV Месяц назад

Not sure. Did you select the master?

@pogpogger4381 Месяц назад

@@PluggedinAV Worked out that i cant make these changes while not connect to the console. One ofther question. I have 5 auxes and am wanting the "Aux 6" button to be. "FX 5 Send' like the 1-4FX Mix. Is this possible??

@PluggedinAV Месяц назад

@@pogpogger4381 yes you can

@pogpogger4381 Месяц назад

@@PluggedinAV how? Cheers