Sinethemba Blose you are a very good tuitor.🇿🇲💖😊👍 I have never driven a manual transmission heavy truck but through your practical explanation I have mastered everything you use the splitter for going to high gears or low gears. I will train next year here in Zambia in Lusaka.
Thank you Sinethemba, Don’t forget to make sure that your road speed is 20kph or lower before shifting from High range (7th) to low range (6th). Otherwise the range change synchros don’t synchronize and crash into each other, causing damage to the internal components.
Thanks brother u r best so far u know how to teach continue with the same spirit how I wish u were here in zambia I would have loved to be close to you.
Appreciate your work, I'd like to know that how these trucks are performing? Are you satisfied with the performance? And what is the price range for these trucks and also rate performance 1/10 if you want to. Will be waiting for your reply....
Oh with this one just make sure to lower your gears especially when loaded cz it will run with you😁😁 on high gears the stop engen is very weak it's better to use low gears like number 5 or 4. Then when your revs go up you press stop engen, when they drop you release the stop engen(repeat the process) you will get the best results although it will drive very slowly. But driving slowly is better than speeding till you burn the brakes.
Hey Blose I'm so glad I came across ur channel Im new to trucks especially the 12 geared one, I HV a prob understanding when u change down to gear 2 n uv reached a stop sign, im not allowed to place my foot on the clutch coz I'll burn it, won't the truck switch off?
Stan Muia, thank you for asking. If you want to put reverse push the gear to the far left on neutral till you get to the end of neutral passage then push it forward, reverse will be selected. Also reverse has got low and high range, with low it reverses slowly and with high it goes faster than low range.
