How to Spray Clear Over Base Anest Iwata Supernova 

Hello gunman I want to thank you for this video you have helped me tuned my supernova I did a knock out job on buick you are the best keep on doing what you are best at thanks man

Great point. Pete over at SWRNC on youtube likes to use an RP style gun (Sata) for base. I tried that and it's excellent. You don't have to have a dedicated gun just for base your clear gun does very well.

i use that gun but the not the base one , i use 1.4m supernova and use it for everything i do from wet on wet to clear coat and its a awesome gun , i use to use the gti pro guns but now just use the supernova gun for everything using the new protec paint line aswell , and i back you 1000% on what ya said about base guns mate

hi bud,you sure can lay down a lovely finish with the iwata.good luck

Как всегда идеально! Молодец!!!

hi Man all your work are excellent man,great jod

Nice work

That’s a awesome 👏 video brother gunman I really enjoy 😉 watching that video bro keep it up ✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊✊👊👊👊👊👊👊👊👊👊👊👍👍👍👍👍👍👍👍👍👍👍👏👏👏👏👏👏👏👏🙏🙏🙏🙏🙏💪💪💪💪💪💪

whats your pressure at the wall if its to high you have to choke your regulator down to much does away with the purpose of high flow fitting and gun wont spray right i use the LS400 gold cap base silver cap clear fan wide open

Hi. Is there a difference in the bodies of the gun ws400 base and ws 400 clear

Iwata put base and clear on their guns to separate them. When you have 2 of the same gun and only want to use your clear for just clear. Sata uses a color accent on the nozzle and air inlet blue,black,red I use this system. Base and clear guns only. And metallic,solid colors and kandies. I do this so I can have multiple guns setup for specific jobs. I blame it on my OCD lol 😂

Can you use the ws400 on base as well? Or is it just a clear gun? Thanks!!!

Hey there , got a question and was wondering if u have any advice. After everyday use for a year the lid for the cup is now giving me troubles going on and coming off. It dosent want to go on , at all.. you do as normally to screw on and it cocks one end up one down to start a cross thread spin down onto the cup. So to get it on i have to press down very firmly while holding the gun freely by the cup and crank it on. It hardly even spins on. Coming off is even worse. It gets so tight i can't even unscrew it without tapping something heavy right on the threaded part of the lid/cup. Have always cleans it threads meticously with a brush and rag after every use never let activated clear harden on it . They are not stripped and there is no buildup of paint the threads look absolutely fine inside the lid an on cup but it's like the lid shrank in size.. maybe from solvent soak..? Idk . Scotch bright nor sanding the lid / cup loosen it to thread freely again... should I and where to buy metal cup ?

A few questions for the gunman how good are these prolite sprayguns that are copy's from China? And why is it always recommended to have at least a 20 minute flash time and u use 5 minutes .I believe trapping solvents can lead to other problems.!?

Отличная работа.

Hello ! Recommend it's better to buy Iwata LPH-400 LVX or Iwata WS-400 or LS-400 Iwata Entech? I'm working on itself, and I need Spray efficiency, reliability and good breaks that material. Thank You ! I'm Waitin answer !

Nice job

exelente

Nice work!! I just started watching some of you videos and subscribed, very intuitive stuff. Im in the US and have been painting for about 25 years now. The Iwata SuperNova guns are what Ive been using since they were released. Buy far my favorites, I own the gold cap base gun and the silver cap clear gun, yes there is a difference in the atomization between the 2 guns for those who would question the difference. Im wanting to try the new Sata 5000 phaser, any pros and cons that you know? And would it be wise to keep with the separate guns, clear and base if I was to go the Sata route.

What do you think of 1.2 for clear coat. Will I get the same finish.

Hi Gun Man what was that u sprayed an then sprayed paint on it then clear coat.

Please help me, WS400 1.3 base coat 1.4 clear coat, it's good or not thank

супер!

Can a LS be used for clear or only the WS?

i buy 1.4 ws400 base is good?

What the difference between ls400 and ws400?

1.2hd

Nice work