How To Stop a GATE from Sagging

Подписаться 12 тыс.

Просмотров 34 тыс.

50% 1

How do YOU stop a gate from sagging ?
In this video I explain and demonstrate the process of properly bracing a wooden gate so that it will not sag and droop. Garden or driveway gates have a tendancy to sag over time. A sagging gate is usually caused by the gates not having the correct bracing installed. There are a few principles to follow when bracing any gate and I go through them in detail in this video.
I hoe that this video is of some help to you and if it was, please leave a LIKE and consider subscribing to my channel for some more similar content in the future. Thanks again for watching, your time is very much appreciated and please feel free to leave a comment, I respond to ALL comments. Thank you !
TIMESTAMPS -
00:00 Introduction
00:37 Showing direction of bracing
02:10 Discussing angle of bracing
04:44 Fitting the brace
05:56 Overview & summary
Disclaimer - The Amazon link is an affiliate link and I may receive a very small commission if the item is purchased through the link, but it does not cost you anything. This helps support my channel and enables me to keep posting free content on a weekly basis.
LINKS To all the production equipment that I use -
MOVAVI Editing software that I use - store.movavi.com/order/produc...
RODE Smartlav+ AUDIO Lavalier Microphone for smartphone - amzn.to/3dSLN2h
RODE SC1 Microphone extension lead - amzn.to/366jrih
DJI OSMO 3 GIMBAL - amzn.to/3bAM4VX
JOBY GRIPTIGHT phone holder - amzn.to/2z6Hj9x
70" Camera tripod - amzn.to/2z35qpx
Epidemic sound music and sound effects - www.epidemicsound.com/referra...
Tubebuddy software for new youtubers - www.tubebuddy.com/BACREN73
You can Donate to the channel here if any of my videos helped you in any way, this would be highly appreciated and also help me grow the channel in future paypal link paypal.me/bacrenproperty?loca...
- Thank you !
Thanks for watching and if you enjoyed the content, please consider subscribing to my channel / @bacrenfencing
to see more similar content in the future. This would mean a lot to me and be greatly appreciated 😊
#bacrenfencing #stopgatesagging #woodengatesagging #gatesagging #bracegate #gatebracing #nonsaggate #bracingagate #fencegate #woodengate #fencinggate
Please contact me (Barry) on the following email for any general or business related enquiries - bacrenproperty@gmail.com

Хобби

Опубликовано:

6 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 71

@Bacrenfencing 2 года назад

Thanks for watching and if you enjoyed the content, please consider subscribing to my channel ru-vid.com/show-UC6IWF5LBPAqCwmjXcAGwWJw to see more similar content in the future. This would mean a lot to me and be greatly appreciated 😊

@alexkennedy7574 Год назад

This is by far the best explanation of how to repair a sagging fence door. Thank you sir, thank you very much.

@Bacrenfencing Год назад

Thanks Alex, glad you found it helpful !

@justindarnellfpv 2 года назад

This is exactly what I was looking for 🤯 thanks for the video!!

@Bacrenfencing 2 года назад

Hopefully the video explains the correct way to brace gates of this particular style. Thanks for the comment 👍

@zZCozzerZz 2 года назад

Good Video Barry that Track saw makes a good cut on them cross braces might have to look at getting one of them :)

@Bacrenfencing 2 года назад

Thanks Corey, Yes the track saw is fast becoming my favourite tool ever.........so many uses and so very accurate. If you get one, you will not be disappointed - I assure you 😎👍

@martinkiely3147 2 года назад

Great video good thing I watched it as I am going to be making up two new gates for my rear garden driveway 👍

@Bacrenfencing 2 года назад

Thanks for the comment Martin and I hope the driveway gates turn out well 👍😎

@johnvodopija 2 года назад

Great explanation thank you. I have a gate that needs fixing and your instructions will help me solve the problem. It is a simple framed gate with no diagonal bracing at all! Should be an easy fix. Cheers 👍😎🇦🇺

@Bacrenfencing 2 года назад

Glad it helped John and thanks for the comment - much appreciated 👍

@christen1075 Год назад

Excellent explanation and I was looking for this type of video. Thanks so much for your explanation! Helped me immensely !

@Bacrenfencing Год назад

Great to hear Christen, I am glad the video helped you out.!

@lonnieclemens8028 2 года назад

Thank you for sharing this video. You are the first You Tuber to emphasize the 45 degree angle and the use of a single board for bracing. I will be taking your advice and building a garage door this week.

@Bacrenfencing 2 года назад

Thanks Lonnie, enjoy your garage door build and thanks for the comment

@fireboyspirit3474 4 месяца назад

Really informative thank you 👍🏻

@Bacrenfencing 4 месяца назад

Thanks for the comment !

@elvinzapata4695 Год назад

Great video. Explained very well and in detail. Thank you.

@Bacrenfencing Год назад

Glad it was helpful! 😎

@genghisjen 2 года назад

This was great. Thank you. And I really enjoyed your accent the entire time. But really, I’m about to build a gate and this was very helpful thanks again.

@Bacrenfencing 2 года назад

Thanks Jen, I am glad this helped you out and thanks for the comment - good luck with the gate build 👍

@kenp133 Год назад

Thanks, straight to the point. You are very knowledgeable.

@Bacrenfencing Год назад

Thanks for the comment 👍😎

@thomashosking385 Год назад

Great video, thank you. I thought my back gate was sagging (and catching the ground) because of the hinges. Going to follow your advice and brace it - after re-hanging. You made the transfer of forces very clear.

@Bacrenfencing Год назад

Thanks Thomas, glad the video was helpful

@waynebond6379 4 месяца назад

Brilliant video well exsplained learnt the correct way at last .many thanks 4 shareing. U got a new subscriber . Thanks again

@Bacrenfencing 4 месяца назад

Thanks, I'm glad this helped you out - thank you for the comment !

@mikehopkins4040 2 года назад

Really helpful video. I'm in the process of fixing my gate. Thanks.

@Bacrenfencing 2 года назад

Glad it helped Mike - thanks for the comment

@frankiebye Год назад

Excellent video. Thank you very much for your time 👍

@Bacrenfencing Год назад

No problem, thanks for the comment !

@Infrared1967 2 года назад

Nice. Didn't know the importance of a 45 degree angle.

@Bacrenfencing 2 года назад

Thanks, yes the angle is important, just ensure not to go under 45 degrees with the bracing. Anything over 45 degrees is fine within reason. Thanks for the comment 👍

@greenworxgardenservices6018 Год назад

Love the videos bud and would love too see more 🙂👍🏼

@Bacrenfencing Год назад

Thanks, I will start doing more soon, just hard getting the time at the moment 👍

@clemmcguinness1087 3 месяца назад

This is great, thanks very much

@Bacrenfencing 3 месяца назад

Glad you liked it!

@citytrees1752 Год назад

Excellent explanation. Thanks.

@Bacrenfencing Год назад

You are welcome!

@estevanorona9079 Год назад

Great video thanks for the know how!

@Bacrenfencing Год назад

Glad it was helpful!

@D1G1TALSYNAPS3 2 года назад

Fantastic video

@Bacrenfencing 2 года назад

Thanks! 😃 I hope this helped you out 👍

@arymonem Год назад

Excellent! Thanks

@Bacrenfencing Год назад

You are welcome!

@Mrdealornodeal618 Год назад

Good video. Thank you

@Bacrenfencing Год назад

Glad you liked it!

@rhydyard 11 месяцев назад

Excellent.. thank you.. solved my gate problem..👍

@Bacrenfencing 11 месяцев назад

Glad it helped, thanks for the comment !

@CoderTronics 2 года назад

Nice tip

@Bacrenfencing 2 года назад

Thanks !

@johncolquhoun6416 2 года назад

The amount of gate you see the wrong way round. They think the diagonal is just to hold the slates a bit better. Very well explained.

@Bacrenfencing 2 года назад

Thanks John, yes I come up against a few on my travels.........was making this last night so grabbed the opportunity to make another video, just not had much time the last few months ! Hope you're keeping busy mate 👍😎

@charliesmith_ Год назад

*Knew* the angles my guys built the new gate with was wrong. It's 5°'s off in 3 months. Ahaaaaaa. Can't get it open 🤣 it's now 15mm out at the bottom and normal at the top. Lol.

@Bacrenfencing Год назад

That's what happens Charlie !

@glennhagman4009 11 месяцев назад

I had a sagging gate. Now I don’t. Thanks for the great tips!

@Bacrenfencing 11 месяцев назад

Glad it was helpful and thanks for the comment !

@bergeracvandamme 2 года назад

Nice. I'd have braced it the wrong way if I hadn't watched this!

@Bacrenfencing 2 года назад

You live and learn 😀 Hopefully the video explained the reasons why you do it this way. Thanks for the comment 👍

@halusomusic 8 месяцев назад

How did you measure and cut the angle so it fitted flush in the brace?

@Bacrenfencing 8 месяцев назад

Just lay the brace on the gate and then use a straight edge to eye the line. Mark it and then cut in the mitre saw. You can see how I do that on this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-cjVIita2TXs.html

@a3883m Год назад

I just watched another video from a fence installer and he said the angle should be 45 degrees or LESS. Can you clarify which it is? It seems like once you go past 45 degrees, the brace would be weaker and want to pull apart. Thanks!

@a3883m Год назад

Nevermind! I figured it out. You guys are saying the same thing. You were measure the angle between the top board and the brace, he was measuring the angle between the side board and the brace. If your angle should be greater than 45, his should be less. Sorry for the confusion!

@Bacrenfencing Год назад

Yes, depends where you measure the angle from, but hopefully you figured it out.

@heatheresteubing-fisher9729 Год назад

At first you had the brace aiming toward the bottom center - the actual gate brace goes all the way to then bottom left edge. You said that was too far...???

@Bacrenfencing Год назад

In the video I explain about the importance of keeping the brace over a 45 degree angle, you have to position the brace to achieve that.

@radishpea6615 Год назад

with everything secured in place, why without bracing will the gate sag?

@Bacrenfencing Год назад

Because if it is braced the other way, the force of gravity over time will naturally push the furthest corner from the hinges downwards. If it is braced correctly, that force will be directed to the bottom hinge and will hold the gate in shape.

@radishpea6615 Год назад

@@Bacrenfencing Thanks but I still dont get it. If each vertical board is held in place by 2 nails or screws at each horizontal and the hinge is secure, I just dont understand how it can sag. I am not saying it wont, I am just trying to understand why. The hinge at the pivot would been to open up at the top for the top to tilt.

@Bacrenfencing Год назад

Basically if there are no diagonal bracers, the gate will easily be pulled out of shape. Try it yourself, if you get some fence boards and put in three rails without any bracing, see how easily this can be pulled out of shape. Put one corner on the ground and then pull down on the opposite corner, the gate will basically pivot and go out of shape very easily. Kind of hard to explain........

@radishpea6615 Год назад

@@Bacrenfencing thanks for trying