My miner was working fine and stupid me decided to update it to newest firmware to save energy and since update it’s not connecting to my pool I tried to reach customer service but no luck.. You have any suggestions?
I thought you need need to reprogram the eeprom on hashboards to march controller? I just got a S19j pro and disappointed that there is no DIY way to update to Brains or Vnish. They will remotely install it through VPN. I will get a new controller if it’s just as simple as a swap and flash Brian’s. AMlogic is a PITA
Is it possible to flash S9 firmware to a control board that has s19 firmware on it? I guess that would be downgrading it. I’m trying to use the control board as a test board when I’m repairing. I can’t run my test software on the s19 firmware. I can however use control boards that were used for z15 miners. Thanks!
@@hyukkang9552 Yep they moved it on their site. Now if you go to Firmware Download>Choose Model>TF Card Service Pack, the file to reflash will be there.
Within the last couple months does the am logic board now work with Brains OS? So will it work while mining with Slushpool? That might be why the new control board I had to get won't work because I'm using incompatible mining pools?
Control board won’t impact compatibility with mining pools. The AM Logic board is not supported by Braiins. That being said, there are two options to point hash at Slushpool. Their stratum V2 option is only compatible with Braiins firmware whereas you do not need Braiins to point at the stratum V1 option. Check which one you are pointing your hash to and that will most likely fix the issue.
All nice and simple, but I've done it on my S19j Pro 92T, Amlogic swapped for BB and it doesn't work. It seems to be connecting with a pool but not hashing, by the log, It looks like PSU is not compatible with a BB board? Any idea how to get around it? PSU: APW121215C v3.0. Thanks !!
@@dawidgazur9400 There is one critical tip during step 5:Remove the MicroSD and restart the miner. In over 30 seconds, please reboot the miners.(Note: do not power off during the restart process;power failure will cause the OTP to fail to turn on which also damages the control board.)
@@mikecimorelli5156 Model type should be on the top cover of the machine and the front cover plate next to the ethernet port where the serial number is.
Hi 6:44 flashing instructions: skip to 2: no matter what size microsd card i put the laptop, there's always 433mb short. Which means i can never Drag/Copy the files to sd card. I use 16gb sd, 32,64,128..ect. Always 433mb short. Can anyone help. I have this s19 pro since Jan/2023 and never hashed a hash. The steps Can't be any clearer, so i know i follow them to the T. Any ideas. thx