When checking the atator for ohms. Where were the leads placed? Are there specific leads you're going for ? Like there are one horizontal lead and 2 vertical ones
I've got the same wheeler as you have there . I have 3 diodes in my fuse box . I used a test light to check continuity and no power is going to any of the diodes . Is there supposed to be? If so ,how can i test or fix ?
I have a 10’ mudpro 700 and I’m having an issue where the bike will only start with a battery charger on 40/50amp start. I tested the stator like in the video and everything checks out... I’ve changed battery’s, tried jumper cables, etc will only fire off charger on high amps. Any ideas?
Hi Jerry. Don't mean to be an armchair critic, but just thought I'd mention new camera audio doesn't sound like it's central. The right channel is quieter by about 7.2dB. Perhaps the camera audio gain on the right side isn't as high as the left. Anyway, just thought I'd mention. Cheers for the vids!
it wasn't in the beginning was trying to figure out how to operate it, had a issue with no sound on one channel and tried to duplicate it and pretend it's stereo. I will double check the audio gain next time i use it
@@TestDontguess yes it is the voltage regulator it burnt up the oem and a replacement one every thing works as it should and it runs and rides. good but keeps burning up the regulator any ideas thanks in advance
@@TestDontguess I have a couple questions. I have a 06 arctic cat 250 with no spark I've seen other models have issues with the magnets on the flywheel falling off. Was that a issue with the 06 250 ? I held my spark plug as it spun then flipped the override switch and felt a single spark at the plug and at the handle bars.