In this video I show you How to TEST your Starter Relay on a gsxr 1000 17-23, but really this will work for any bike that has this specific style relay. 4 Pin Starter Relay amzn.to/3q4MroX amzn.to/3O7njWG
Best explanation on how test a starter relay i found. Just need to figure out why my 05 Yamaha Bruin 350 acts like it has a dead battery when ever i try to use the electric start. Starts just fine using the pull cord but it's a pain in keister and it just about broke my wrist the other day. It has a new battery and starter but seemed like it had quite a bit drag right out of the box but didn't think much of it then because it worked fine at 1st
Hey buddy, my bike just gave out as I was riding, the 10 amp ignition fuse blew out and every time I replace it and try to start the bike it blows. I changed my rectifier and no luck. Hope can help. Thank you, always enjoy your videos.
if it keeps blowing the fuse when you turn the key that means you have a short somewhere on the bike you will have to check all wires on the bike till you pin point the problem. I have a video on that very same situation>> ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fhnyPFsl5i4.htmlsi=wEKaVw6JFF0OAeqD
Really nice video very helpful However my boke wich is a 600 honda transalp 1991 the relay clicks but once he clicks the bike wont crank it just stops and eats all the battery any idea is it a bad relay? Also when i push it in gear the bike starts Already checked the starter motor works fine Thanks in advance
I own a 2007 Kawasaki Vulcan 500. I was riding it the other day and had shut it off and started it a few times without any problems. It was running and when I went to take off, it died on me. I made sure it was in neutral and everything was set to go, when I pushed on the started button all it did was buzz loudly and rudely, but it wouldn't start. After a few tries with the same loud buzz and nothing else, I took the side cover off and believe I found the relay switch that was making the noise. I am having a lot of trouble getting the relay switch out, is there a trick to removing it? and do you feel that this is indeed the problem?
it sounds like a battery problem if your getting a buzz sound from the relay. to remove the relay you have to get it out from the rubber boot holder there is no real trick but found if you wiggle it side to side then you an get the whole holder out and remove it from there. also check your battery with a volt meter it should read at 12.7 - 13.4v
MY PROBLEM IS WITH KEY OUT CONNECT BATTERY AND THE STARTER MOTOR RUNS. is this because the contacts are stuck together ran ok weeks ago until i recharged battery? i don't even have to press starter button just runs.
@@ACProductions77 without turning the key OR pressing the start button it automatically starts. As soon as battery contacts are connected. so that would mean because it seeing power from the battery all the time its stuck maybe?
@@ACProductions77 yep took it of voltmeter across contact to starter and battery side connections AND HAD CONTINUITY hit it with screwdriver and went ok but i will be replacing it. hope this helps some people on here. thank god for voltmeters.
if you keep popping fuses every time you install one in then that means u have a short somewhere on the bike & will have to go through all the wiring to find it which will be time consuming & tedious
what is when you hit the starter button on the handlebar but nothing happens ? is the relay also brocken ore is my handlebar starter brocken. I bypass the starter motor on the starter relays the engine starts. So that means my relays ore my starter button is broken.
could be that the contacts on the button are no good, or not enough battery power to start the engine, if your starter rely was the problem then you would not have any lights on gauge cluster.
@ACProductions77 the lights are good. The fuel pumps make noises. I can start the bike with pushing it in 2 Gear and it starts normally. I must test if my start button switches ore my relays is switching. Perhaps the coil is broken.
