HOW TO THREAD A METAL PIPE 

Man I think this is one of the best videos on this topic I’ve seen!

I am a pipefitter for sprinklers and do 24 hr service calls. This has saved my back 100%

Very comprehensive video showing manual pipe threading technique. Well narrated with great camera angles. Much appreciated and caused me to like and subscribe. Good job, man.

Actually the deburring tool in the video is for softer metal pipe such as copper. Steel pipe uses a pipe reaming tool to de-bur the inside diameter of the pipe being threaded. Steel pipe should be reamed prior to threading. This is done to return the pipe’s inside diameter to its original bore.

Simply stated and straight forward. Excellent video!

Good clear explanation of a specialist tool you need if you want to thread a pipe properly.

Just finished part 1 of my hvac 1 class and this is what we did today on the last day. Definitly gives your arms a good workout.

Very good video. I like how you explained in detail everything you were doing. It was so helpful for the newbie like me. Thank you your time sharing!

Very straight and clear demonstration of which i have learnt something

Excellent instructional video. Straight to the point and explained and videoed perfectly!

Great step by step explanation! Thank You!

I started in the epoxy flooring business but gradually went into plumbing, gas lines, soldering, etc.. it's definitely fun and challenging

Rigid makes a spiral coned reamer that is ratcheted for the deburring, also worth mentioning is the rigid pipe cutter, which makes a great complete set for this task… Keep on rockin

Great video. Other instructors say to oil the pipe before starting, and also to back the die up occasionally as you are threading in order to remove the burrs while you cut. Maybe the final reversal does it all at once, but just an alternative suggestion.

Great video. Thanks for sharing.

Excellent .Clear headed man .

This is the best video I’ve seen on pipe thread cutting. Thank you for sharing!

Great video, thank you for sharing

Best video on the subject

Good stuff buddy, thanks!

thanks for the help.

Great presentation! 👍👍

Thanks👌🏾👍🏾 very clear.

This is the perfect place to learn

Let me grab my book and pen. I need to get on the DIY more

I shoulders are getting soar already I bought one of these and have a whole bunch of projects I already have in mind . Shelves tool stands workbenches

Thanks for your help,😍

Perfect thank you!

Thank you! I had no idea. I'm sure that it would be hard cutting a pipe that's already connected. It looked like it took some force. Thank you. I enjoyed the video. I subscribed.

Good info. Thx 👍

easy to understand

thank you very much,kind sir.

bravissimo eccellente video e spiegazione, anche io preferisco le lavorazioni degli impianti idraulici con canne in ferro zincato, mi da molta soddisfazione !! un saluto da roma 👋👍

I like this.

Excellent…. Tks

Great video

Hi I really enjoyed your video. I just bought a cheap conduit threader and tried to thread a 25mm conduit. with alot of pressure from my hand on the die head and turning the ratchet. The die looks like it is cutting but sometimes the ratchet spins or doesn't grab the conduit. And take the conduit out and there is no thread , it has just chewed up the pipe leaving it rough with no groove or thread pitches

Great video, brother !❤❤ yes, using your gloves would make a lot of sense.

Great video, nice camera shots and good explanations. Any advice on where to get replacement die heads? I wouldn't even mind paying a little more for a good/better one. My 1/2" needs replacing. I have the same Vevor/Harbor Freight manual ratchet as the video. Thanks!😊

I'm trying to redo a small portion on my fire escape railing. Its black pipe. I know the store can cut my other pieces but im using your video to thread my existing pipe at the connection point

Could you plz show with plastic pipe??? Really nice teaching, i learned, i liked and subscribed as well. 💯

Great video! I am new to this and I found an electric version that looks easier.

Can you do this to a pipe that is cross threaded?

pretty good video, Good explanation of material and assembly, BUT you should reverse the thread cutting after a few cuts not after cutting most of the material.

Verigood tool

Simply and very good explanation, well done sir!

Thanks DUDEZILLA for this!!

I want to say that red threading set said It was for British standard pipe thread not National Pipe Taper threads like the blue one. Was the red set a harbor freight purchase online?

Excellent presentation bro! I'm tired of pulling out my 300 Rigid to thread one piece of pipe on a emergency job. This would definitely facilitate things. However, shouldn't you have at least three revolutions on your fitting after threading?

Great job sir btw how about the inside thread how to make inside one? Plz can you share

Yeah, how I wish I could have those tools but I could never.

What brand pipe rachet did you use? Great video.

Hi, nice video I have a question, the diameter of the 1 inch pipe tube was the inner diameter or the outer diameter ?

why didn yu use the red cutter 1 inch that came with the system? Why? Cause the red ones dont work!

I have a question. I doubt this will work for my application. But one never knows until he asks. I am attempting to thread a 9mm barrel to except a 1/2 x 28 flash suppressor. I have made one attempt already and failed. My problem isn't threading. It's removing 2mm of metal around the barrel to handle the 1/2 cutter. The barrel is 15mm thick. Before I thread I need the barrel to be 13mm. I tried using a grinder. This is where I failed. I wasn't able to get it even all the way around. I don't own a lathe. My question.....would I be able to feed the 15mm barrel into the 1/2 ratchet threader and would it cut 1/2 x 28? I'm hoping the opening to the ratchet is slightly tapered to accommodate the 2mm of extra metal. Thanks to anyone that answers.

Thank you so much. I was a bit confused about Stock and Dies, (the Threading process in general) Question: After you Thread, is it common to need to Ream a pipe again?

Question? How do I do the maintenance of the pipe thread arm

I didn't know the turning of 180 degree

I would think a small bevel at the end of the pipe would help to getting the die on

I am Aftab from Pakistan Domestic & Building Plumbing Works. Installation & Repairing LPG, Electrical, Manual Gryzers & Auto Washing Machine. My fix die is not working. Do you help?

I have changed 3 times the cutting die on my Riged pipe threader with no good results.the thread on the pipes keep breaking off.I have done everything watching the videos as how to do it right way please advise what am I doing wrong

At 01:59 you say the dies correspond to the *inner* diameter of the pipe ? Surely you mean the *outer* diameter ?

What is the price of this die box??

How much is 1 set

magkano yan

Right that's from metal shop for boys in 1960's

what is the name of this tools

welp bspt and npt is different angle though..