how to turn off the ABS light on any honda and acura 

Bless up. Homie you just saved me. My girlfriend needs my car for a road test and they won't her use it if the abs light is on. The restart worked. May you have all the blessings in life.

Good man tried it on my 2006 accord worked perfect i will say a special prayer for you tonight God Bless

Thank you so much! Had a dead battery on my 2012 Pilot and after jumping it, both the ABS/VPS lights stayed on. So I knew it was a glitch. Tried several suggestions. Your's was the only one that worked. I've heard of people having to pay upwards of $50 to reset it. What a scam.

got in my boosted 2000 honda civic 4 door this evening an randomly the abs light was on, im gonna get it inspected tmrw, an i thought to just give this a try, an ir 100% worked, im so thankful and grateful for your video it just saaved me a bunch of time an it guaranteed me to pass the vehicle inspection tmrw, your a legend my dude

Worked for my 2005 Honda Element. Saved me a ton of money.

Thank you! Going to try this and see if it works for me. Will update once that happens. Thanks for the straight forward and helpful vid.

This worked for my 2000 Honda Accord V6 EX; I used a paper clip instead of wire.

Thank you very much!!!! Just did it and it worked like a charm!!! Can’t thank you enough.

Thanks man! This video is clutch for visual learners like myself

Dziękuje kolego. Problem usunięty w hrv ’99 👌pozdrawiam. (W hondzie hrv ‚99 nie ma złącza obd , jest natomiast niebieska złączka 3pin i 2 pin i to ją mostkujemy. Następnie postępujemy tak jak w filmie wyżej i problem zanika )

Thank you man. This working for my 2008 honda accord.

Gracias, pude reparar un Accord 2002. La ficha es azul, tiene dos cables y no esta conectada a nada. Debajo del volante. Esa misma ficha da lista de errores con luz. Segui tus pasos para el ABS y me fue bien. Abrazo !!

Thanks for posting this tip. Everything worked fine EXCEPT that the ABS light continued to stay on. Alas.

dude thank you so much! dealer was such pricks about turning opff the stupid abs light after I changed my suspension and most likely damaged one of the sensors. idc lol ill pump the brakes manually. the lights are so annoying though. you're awesome!!

You a life saver bro!!! It worked for me.

Lifesaver worked a treat, thanks for sharing your knowledge

Just want to say this worked on my 2000 honda accord v6 coupe in turning off the light. However the light did come back on almost right away b/c the new sensors I installed myself were not generating voltage, or so I thought. Once i fixed that (I had to reposition the new sensors a little due to the rust and the less than clean hole) the light went off by itself in like 10 seconds of driving. The sensor tip needed to be VERY close to the reluctor ring. I was hand turning the hub/bearing (wheel is off at the moment) while trying to get a voltage reading on my multimeter. Once I got a reading I tightened the bolt good and buttoned everything up and the light went off auto! Those other youtube videos failed to mention that you really should check resistance and voltage before putting everything back or that ABS light won't go away and you'll incorrectly think the new sensors were defective. PS if after doing this and your ABS light does go away but you notice your ABS activating under 10MPH as you slow down, then for sure your ABS wheel sensors are not generating any if much voltage. Lastly I TU and SUBBED this video bc his method worked as intended. If the light came back on , it is not his fault. Just means you've got an underlying issue, probably with the sensors.

Thanks for the help, very clear instructions

Brother thank you so much this was a life saver shop wanted to replace all kinds of stuff

Thank you so much - it worked exactly like you said - installed wire in port 4 and 9 and done in less than 2 minutes - thanks

Thank you Sir! You just saved me $7000 :) Who do I make the check payable to? LOL You're the best

Great video thanks, I just had this light turn on and replaced the sensor couldn't get the light off until now. Awesome job👍

Thanks a lot. Worked like a charm.

Have a year 2000 civic se.The small estate version.Not sure where to put the wires?.Also my mate said he could plug his little computor into it to reset ,but im not sure where to plug it in too .Thanks.

Awesome video man! Anyone with a Honda Odyssey 2011 who is dealing with this. Do as shown. Make sure foot is on brake before key is turned. Takes some screwing around with but will work. Light might blink more than usual

Thank you so much for this 💕

Straight to the point and 100% accurate thank you.

This worked on my Honda accord 2008 thank you so much 🔥💯

Thanks alot very helpful!!!!!

My 99 crv threw a abs light randomly and it’s not starting, cranks but won’t start going to try this. Hopefully this works. Going to try a different tranny speed sensor then new front abs speed sensors. My Speedo jumps speed erratically and randomly, also has a code for the front abs speed sensors

Thank you buddy much appreciate it help me 🏆

I’ve got a 2008 CRV. Will this work. ABS and VSA light still on after changing the correct ABS sensor that the diagnostic reader gave me?

Thank you so much you’re good man

I have question I have 2013 honda civic ex and I was driving car and at the same time all the lights came on. abs,vsa,power steering, brake light can't figure it out you have any suggestions instead of dealership. Thanks

I’ve got a ? O course. Abs on 06 crv brinks 3x and doesn’t hold. My VSA is also on with the triangle light. Any help is appreciated.

I just did it and it worked. Thanks brother.

I WAS CONFUSE it only have 8 holes I was looking for the 9th hole and never found it loll but it does works

Thanks a lot,you saved much

How are you Las time I changed my front wheel bearing on my 2008 ODYSSEY but the sensors was stuck so I cut it and put 2 new sensor and now the abs light is on I don't know why if sensor are New

I tried many times exactly the way you instructed. It blinked twice but the abs light is still on. Accord 2003

I have a 2006 UK-spec Honda Jazz (aka "Fit"). The ABS light came on after hitting a loose rock on the road (no damage to the wheel at all). Both my old and new OBD2 scanners report "No Codes". I tried your method: 1. Turn Ignition OFF. 2. Join pins 4 & 9 of OBD2 socket 3. Hold Brake pedal down 4. Turn Ignition to ON (not start engine) 5. ABS light illuminates... but the ABS light does not then go off for me. I tried pulling the 7.5A ABS fuse for a minute then replacing it but it made no difference. Any ideas?

Just like that, thanks! Peace to you my friend 🙏

Hey Man.. awesome video, but may i know what is the name of the 4th and 9th pin? I m afraid mine would be different pin position.

Thanks. I have a honda accord 2000 but doesn't mark the seat belt light

I have a 06 Civic is this the same procedure that you know how?

My 2000 Honda Civic B18c4 comes on the abs goes off sometimes mechanic couldn’t find the plug too diagnose as it appears too be missing or re loacted it can go off long enough too pass its mot ) ( yearly inspection here in uk itll fail with abs on))

Thanks for the video easy & quickly

What do you do if you can't find the port I've checked everywhere

My hero💪 I swapped my abs sensor and was losing my sheeeit

Is this only working with Japan made Hondas? I have a UK built CR-V 2002 and no reaction at all to the abs light with papeclip in pin 4 and 9.. :(

Appreciate that bro

dude you FN rock thank you

THANK YOU!

Bro I can’t wait to try this, do you need to put a new and sensor in for this to work??

If this does not work any other solution? 2011 Accord Traction control is also lit up with my ABS light. Help!

Do you know how to do this for a 95 honda accord? I'd really appreciate the help!

How can u turn off abs and brake light on 2000 Astro van

This procedure did not work on my 2005 Honda Accord. The ABS light did not go off when I turned the ignition switch with foot on brake pedal,, it just stayed on. Further,more after removing the jumper wire, the starter would crank, but the car would not start. Apparently the jumper wire between the pin holes shorted something out or blew a fuse. Please advise how to repair whatever it damaged. Thanks.

Thanks for the vid

Thanks a lot bro

works!! thanks

Gracias funciono para un honda accord 2002

Worked on 1998 Honda Accord 🤙🤙

Thanks a million..👌🏾

Dose it really work I have a 2017 honda accord ammo try it later

Will this work on a honda crx delsol 1997??

Will 16 gauge piece of copper wire work?

If is flashing 3 times and stay on what is to be done?

Will this work on a 2011 Honda accord?

My 2001 acura cl type s has the abs light on and can't find the box for the ports to connect the wire can somebody help

Hey buddy i changed my abs cord out also, i did the steps you provided the abs light flashed twice but remained on. What would make it do that?

Dose it work for 2001 honda civic?

Thanks for the video.. Any ideas on how to get ABS light off on a 1995 Honda Legend?

Thank you . 2006 crv lights off. Thank you again.

Thanks my brotha worked for me ,

Nice, thanks It's working

Stupid question but, what kind of wire is that? What would I even look up to find something like that? Does it come as a part of a multimeter set or something?

I have the same issue with my Honda Accord I tried this but my abs comes back on after starting I do have a tcs light on would that affect it ?

Right on, man.

Thanks bro!! It works.

You you can do en Honda Accord lx 2003 the same thing,and then he passed the test tk gracias por todo espero tener respuesta gracias

The abs light is on with vsa light too, I proced to do in your video and really abs is off now, but vsa continues on, do you know why ?

This ddnt work on mine did the jumper wire and hold the brake pedal while on acc light dis not go off

I tried on my honda aria 2006. When i tried to push the brake, the light still on.. nothing change to the abs, air bag and brake light.. any suggestion..

He calls it a C Connector, not the OBD port 1996 behind the ash’ tray?

Thanks bruh🙌🏾🙌🏾 back in business 🙌🏾

Awesome! Thanks bro! 👊💥🔥

I was driving today and the light just came on, can this hack help me or? Thank u

Thanks in a big way

Great video

Will it work for a 13 model

I used a paper clip ABS kept blinking still on when I turn the engine on. Where do I get that wire thing.

Works perfectly

How do you reset the abs light for a 95 Honda Civic ? Help please !

Can do this on Accord G9?

It will work in Honda Civic 1.8 Sedan 2008 model ??

Mines is still on…it just blinks repeatedly. What should I do?

My light blinked 3xs. Any idea why? I recently replaced my rf sensor and my light is still on and obd is not reading the current speed on that sensor

Just wanna know if this gonna work to honda crv 2002 gen 2?

By doing this does the brakes still work properly? does anyone know?Thank you