This guy is the best very thorough and descriptive and clear! You helped me fix my bricked phone when i thought it was over with appreciate everything you do and the time you take to explain greatly Thank You!
Thanks a lot, dude. I thought I destroyed my phone when I tried to do the automatic wireless firmware update and ended with an error. But with your tutorial I revived it. I have a Blackview Crown and now it is alive again. Keep up the good work.
Heil.Grüsser Sie.Was ware für Sie die endlisches lössung=sulotion???Was waren die softwaren namen was die lösung waren??Und dás die USB port Cleaner program vonwhoher aus kann das die mensch abschpeichern=abladen???
without a doubt the best china phone tutorial ever. You helped me tremendously. I got the wrong preloader installed and without this tutorial I'd still be bricked. Thank you for your unselfish help. Much appreciated.
Congratulations friend! My ZP980 More Is Not A brick ! After several tutorials his was the only one that worked! Congratulations and your note is 1000 ! I did not have to perform step 4 ! Parabéns amigo ! Meu ZP980 Não É Mais Um tijolo ! Depois de vários tutoriais o seu foi o unico que funcionou! Parabéns e a sua nota é 1000! Não precisei fazer a etapa 4 !
Great video. Thanks for taking the time to make this video, it was really helpful. It can't be stressed enough that you need the correct version of SP Flash Tools. In my case I thought I had the latest version of the tools and was about to disassemble my phone when I found out there was a newer version of the tool. When I used this version, my phone mounted inside the program immediately for downloading the preloader. Look online and find out what version of SP Flash Tools other people are using for your phone.
Thank you!!!!!!! You gave me one more time my phone!!! Just for other people, when you are in the last step after flash preloader at least in my phone philips, I had a little problem with spflashtool, with one annoying message: "pmt changed for the rom it must be downloaded" and nothing happened after that. So the solution was I had to first config into "Firmware Upgrade" select every item and then press Download, then I had to connect first pressing down Volume button and then putting in with usb cable, in the whole process I pressed down Volume, then no more annoying message and everything was flashed smoothly. You are the best *****
Wilmer Calle Also I forgot to say, I did not opened my phone, because when I connected to the computer by cable, there was a "error when installing driver", so Pc recognized but driver was not found. I did your instructions! It worked as you did.
Thank you so much! Your video from 2014 helped me to solve and unbrick my new mobile Umidigi Power 3. The idea of formating first the preloader and then the rest was perfect!
OMG! I thought my 200€ phone was going to become to just a simple nice brick, but THANK YOU SO MUCH, I bricked my elephone p7000 just the DAY AFTER buying it and my parents were so mad... THANK YOU SO MUCH Again for the information, I really appreciate it 👍 I spent A LOT of hours trying to unbrick it, if you're reading this and feeling like giving up, just DON'T and keep trying until you find the correct ROM and you'll success, I swear.
man thank you very much i spent 20 hours trying everything from adb and installing a ton of programs-packages (and waiting for them to download) to every bullshit that everyone posts on internet and finally bumped accidentally on this video and step by step I resuscitated my phone. Thank you very much
thank you for this video, it is very well made, easy to understand with you both showing us and exxplaining how and why you were doing things. learned a lot with this especially how to solve problems with drivers one of my worst nightmare with windows. Most important brought my phone back from the dead. thanks again
You are awesome, let me tell you that. I tried a lot of ways and methods and I reached to one that was especially for my case but still didn't worked. That until I saw your video and picked your advice to REMOVE THE BATTERY for the process. And it worked. Thanks. Best of luck.
Man i love you soo much, my phone has been bricked for 2 weeks, i turned it on, put in garage, after 5 weeks it still in boot logo :DDD, but well, yeah u saved my life so much!
Thankyou so much !! Really clear instruction and you saved my phone, I'm really grateful to guys like you who give up their time to help people like me who should know better than to mess about trying to upgrade their phone. Thanks again
hey, Leeco kindly help me out my phone is stuck in recovery mode while reset it is not getting switched off until battery gets drained and it says either update system or clear data. when we select update system it says no .zip file found in directory and when clear data is selected it says there is no backup done so you cannot proceed. previously it was showing that in english but now it shows the same in chinese please help me out. when i tried to contact customer care of after sales service they say that it is closet ( those 555 service centers stated by you ) and one of them said all service centers of leeco in india are closed. please do help me even my phone is in warrenty period any suggestions can i do the same ?
Thank you so much! I got my phone to work again! It was such a pain in the ass. I had to hold down the volume button while the rom was downloading, but after that it rebooted and went right back to working again :D
Thank you for the video. Due to fact i don't have access to the volt meter for one. Now I get it that I might as well toss the phone. Since I do not have what is needed toget into recovery mode etc etc I am at the end of my journey. Thank you for your patience.
Sir Thank you so much for this Tutorial .. My name is Christian and im from the Philippines .. My mobile device is Gionee Gpad G5 .. i don't know what happened, first i decided to Factory Reset my Phone because it is Rooted and i want to update the System Software.. Then While the Update is installing in Recovery mode, all of a sudden it says Installation Aborted.. and then when i try to Reboot it keeps on redirecting me to Recovery Mode.. i really started to Panic and scared because this is my first time to experience this kind of nightmare .. :) From 10pm i keep on researching lot of Tutorials, Luckily RU-vid gave me Your Video Tutorial .. i downloaded it and watch carefully each procedures .. and now its 4:30am im sooo happy to bring my Device back to Normal .. Again sir Thank You so much for this Tutorial.. i hope you can make lots of Helpful Video Tutorials .. This is 101% Working :) Thanks Again sir ..
Thankx for the videos very helpful but you links are not working. I am getting error BDROM ERROR S DL GET DRAM SETTING FAIL 0x13BE...EMI OBTAIN DRAM FAILED... Can you tell me where am going wrong
Hard bricked Umidigi A5 Pro, was unbricked with this instruction. VolDown+Power send phone to MTK Mode, after that flashing was successfull. Before that, it was a Unknown Device.
My device(phone, alcatel one touch pop c1) keeps connecting/disconnecting, i tried holding the volume buttons before plugging it in, while its in etc but nothing. Any ideas?
if you have a iphone 6s plus clone the reset boton most likely is in between the camara and the flash light on the back,that way you dont have to open it and take the battrey out
thanks this video is the best on the net to unbrick mtk phones, but i do have a problemi have an infinix hot 2 with a removable battery and it doesn't want to connect with META mode, can you help please ?
My Doogee Y100 is not a brick any more! Thx you so much!! For all those who are giving an error:BROM ERROR : S_FT_ENABLE_DRAM_FAIL 4032 and similar just run the latest SP Flash Tool v.5.1452 and it will work,error message is gone! Thx you so much one more time!
hello my good friend steeven from itxtutor, thanks for the nice video. In youre video at minute 7.19 you talk about a reset button in the back covered by some type of removeable plug. What is that button for. I have dead atnt atrix 2 mb865 mt6572 that went dead during a software repair upload. I have open it to view the motherboard but has very few test points and none seem to give a response, can you help me out. Many people have the dead atrix problem but no one talks about opening and trying to get the computer to recognized, so i am a pioneer in this repair, would apreciate the help.
Great tutorial. But i've had jiayu g5 broken and flashtool showed error (4001) S_FT_DA_NO_RESPONSE.. it seems that flash memory is dead.. and i even don't lnoe where can get new lash memory to fix it
nice video it helped me understand how to unbrick my phone, but i still need you help, when I hold the Volume + button and connect it to the computer, it is recognised but only for a second then disconnects. how can i fix that My phone is a BLU studio 7 II
Hi Steven! SInce I have had some serious problems, I would like to ask you, If you have ever had Vernee Thor to unbrick it? I am getting always error S_FT_ENABLE_DRAM_FAIL(4032). I have tried to press all the combinations on the phone, but nothing worked. There are two things that I cannot do right now, because the phone is in warranty still - open up the phone and connect those contacts and the second is - to flash with some other Preloader, because Vernee provides only one Preloader at the time. Do you have any other suggestions what should I try in my situation? You can naswer to PM. Thanks a lot!
B_ROM (2004) ERROR - just info for others - I can't believe it, SUCCESS!!! No other version, no HW defect, no volume buttons - correct USB VCOM drivers, other computer, still nothing - so I got angry and frustrated and I started connecting and disconnecting battery during the connecting/disconnecting sound, pushing download anytime even when phone connected with cable to PC - and suddenly, I don't know how, it started flashing! I just remember - at that time there was NOT the US B VCOM on COM4 drivers used, but MEDIATEK USB on COM5! Everywhere you find that info about using USB VCOM, but I think I pressed the download button with battery in and MEDIATEK USB as current driver...it is the battery, which makes the difference, then it looks like PC tries different drivers after each self-disconnect by the device...INCREDIBLE! Hope this could help those who failed at all the other attempts just as me...
hi there. will this work if my phone, an umidigi a5 pro cannot even power on? still possible to flash or will this only work with functioning phones. thanks
www.china-devices.com/topic/2078-mtk-megapack-download-all-downloads-here/ i just googled by link title "mtk megapack" heres download link to files directly mega.nz/#F!CRAA3BqT!lEvteq6nHYEqABPRE1H5sQ
Where is testpoint or reset on BV7000PRO? Had a bootloop to twrp, flashed super su uninstaller and wrong boot.img instead of spflashtool stock rom. Now it is forever logo screen and no fastboot at all. PC and SP FLASH won't recognize it anymore in any state.