How to Unbrick Wifi Router with Recovery mode | Tenda W316R Recovery Mode 

Thanks

@@umairpk11 me kr rha hu but ho ni rha

which router? model?

@@umairpk11 same

apka number mil skta ???

Disable wifi adapter first, Goto Local Area Network, change ip address: 192.168.1.10 & default gateway: 192.168.1.1 Now holding reset button plug in your router, Open 192.168.1.1 in your browser tab, select original firmware file then click on upload. *when the recovery page shows in the browser you release the reset button.

Thanks

/WP(IO2) and GND

25q16bsig chip in this router.

@@umairpk11 Hello What is WP(IO2) and GND. GND is ground or minus, and IO2, the second pin. If you can attach a photo of the system you repaired, mark which pins you shorted. Regards

/WP(IO2) is the 3rd pin of IC

Datasheet link: www.datasheetmeta.com/search.php?q=25Q16BVSIG

Open CMD, type ipconfig/release press enter, ipconfig/renew press enter

@@umairpk11 did that, after renew command, CMD show message along the line cannot config IP, I tried wireshark but couldn't get anything for ARP either From your clip, once you know the static IP, disconnect the power from router, reconnecting the power while holding on to the reset button, once all the light on the router flash, short the 2 legs, is this correct?

@@splco.ltd.9400 yes

@@waqastariq5941 1. Download Tenda firmware file (BIN) from the official website. 2. Format USB drive (FAT32). 3. Copy firmware .bin file to USB drive root directory. Recovery Steps: 1. Power off router. 2. Insert USB drive into the router's USB port. 3. Press and hold the reset button. 4. Power on router. 5. Release the reset button after 10 seconds. 6. Router will automatically detect USB drive and update the firmware.

@@umairpk11 lekin mera router v1.0hai. aus ki file hi nai hai website per

@@waqastariq5941Tenda FH456 (V1.0) Router Firmware 10.1.1.1 drivers.softpedia.com/get/Router-Switch-Access-Point/Tenda/Tenda-FH456-V10-Router-Firmware-10111.shtml

1. Plugin Router & Press Reset Button for 30 seconds. 2. While holding the reset button Plug off the router and plugin again.

did this worked please reply 🙏i have also n301 its starting lights are on but not showing wifi name and not connecting to my pc through Ethernet cable its say unidentified network

@@rawafkarim4469 try to add manual IP or open cmd (command prompt) i.type 'ipconfig/release' press enter, ii.type 'ipconfig/renew' and press enter.

@@umairpk11 brother i have this problem in tenda f3 .. Help me with the process

@@Mohammad-Al-Amin try same process, if not work try 1. Plugin Router & Press Reset Button for 30 seconds. 2. While holding the reset button Plug off the router and plugin again.

Reset kar k dobara configure karen. Ager phir b problem aati hy tu tenda ki official website sy isi model ka latest firmware download kr k upgrade karen.

www.tendacn.com/product/download/AC6.html

Open cmd, type ipconfig/release press Enter ipconfig/renew press Enter.

Or add manual IP address

Router model?

​@@umairpk11tenda N300

@@jaatscorpion manual ip daal k try kren, 192.168.1.1

Nhi ho rha sir ​@@umairpk11

digsol router model??

model?

Welcome bro

Check Lan driver

& connect with the Lan port not Ethernet

@@umairpk11 yes is ok. thanks

mtlink?

Open Network & Sharing Center goto Change adapter settings right click on Local Area Connection double click Internet Protocol Ver 4 then select Obtain an IP and DNS server address automatically. OK.

try same method...

Try the same procedure if not working using the ic programmer tool.

Also try this method: Disable wifi adapter first, Goto Local Area Network, change ip address: 192.168.1.10 & default gateway: 192.168.1.1 Now holding reset button plug in your router, Open 192.168.1.1 in your browser tab, select original firmware file then click on upload. *when the recovery page shows in the browser you release the reset button.

To update the firmware of your Binatone WR1500N router, follow these steps: Go to the official website of Binatone and search for the firmware download section. Look for the latest firmware version available for your router model and download it to your computer. Connect your computer to your Binatone WR1500N router using an Ethernet cable. Open a web browser and type in the IP address of your router. The default IP address for most Binatone routers is 192.168.1.1. Enter your router's login credentials to access the web interface. Look for the firmware upgrade option in the settings or maintenance section of the web interface. Click on the firmware upgrade option and browse for the firmware file you downloaded earlier. Click on the upgrade button and wait for the firmware upgrade process to complete. Once the upgrade is complete, your router will reboot automatically. It is recommended to backup your current router settings before updating the firmware. Also, make sure not to power off the router during the firmware upgrade process as this can brick the device. Follow the firmware upgrade process carefully and wait for it to complete before attempting to use the router again

Disable wifi adapter first, Goto Local Area Network, change ip address: 192.168.1.10 & default gateway: 192.168.1.1 Now holding reset button plug in your router, Open 192.168.1.1 in your browser tab, select original firmware file then click on upload.

*when the recovery page shows in the browser you release the reset button.

@@umairpk11how long it’s take to reset??

@@mohammad.rana.sheikh maybe 30sec to one minute, if not work try plug off and replug in with the holding reset button.

/WP(IO2) and GND

/WP(IO2) is the 3rd pin of IC

Try the same, if it does not work, Program bios file to ic with programmer.

which model?