TP Link Router Unbrick | How to Unbrick/Debrick TP Link Router? | Router Recovery from openwrt.

Подписаться 30 тыс.

Просмотров 54 тыс.

50% 1

Here I show how to Unbrick or Debrick a TP Link Router and Load its default original firmware.
When to use this:
1. TP Link router failed to boot after a firmware upgrade
2. To change between regional firmware releases (America/Europe/Asia/Australasia etc)
3. To revert back to, or change away from, official TP-Link firmware
4. TP-Link firmware upgrade is stuck
5. To perform wrong firmware recovery
Requirements:
1. Firmware from the TP-Link website
2. A TFTP server which supports logging (this example uses Solarwinds - www.solarwinds.com/free-tools...)
3. Ethernet cable (preferably cat6 cable)
4. Computer or laptop
5. The TP-Link router must be on the same LAN segment as your computer
For the Method - Just follow the video.
If you have the following queries this video will be helpful:
1. How to recover the router when you bricked it?
2. how to use solarwinds tftp server for tp link?
3. How to debrick tp-link archer
4. How to unbrick tp-link archer
5. tp-link firmware recovery utility
6. how to recover the router if firmware is corrupted
7. tp link router unbrick
8. how to solve tp link router not responding
9. how to fix a bricked tp-link router
10. unbrick tp link router?
11. Debrick tp link router
12. How to change openwrt to tp link firmware If you want to contribute me anything use this link : www.paypal.com/paypalme/techs...

Хобби

Опубликовано:

1 ноя 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 163

@simontrangmar4537 9 месяцев назад

I am doing my homework on rollback before making my first foray into OpenWRT and came across this video. It's truly amazing. Thank you very much for sharing your experience. Really well explained. Cheers - Simon / Adelaide / Australia

@MohamedLBa Год назад

Hello, seriously you have done a wonderful job, my AP was bricked and with your help, i bring it alive again. Wonderful job

@TheTechnologyZone Год назад

Great to hear!

@pablobutron5737 2 года назад

you really helped me with my old wr841nd when I tried to go with open source, you saved me a couple of bucks men, this video should have more views!

@TheTechnologyZone 2 года назад

Glad to hear that

@kostalakoste Год назад

watched different ones on this topic, but yours is the best one. Thanks a lot. You saved me days of torture. Cheers! :)

@djcasl Год назад

Sir you are a lifesaver, I got a Archer A7 from eBay and updated FW via the webportal which went wrong. Now it's alive again.

@IanPattisonOakville 5 месяцев назад

Had a hell of a time getting my TFTP server to actually serve the files, but once that was done it was easy. Thanks for your tutorial.

@TheTechnologyZone 5 месяцев назад

You're welcome!

@guptamadras Год назад

Thank-you! I saved my router after a bad flash. Your video is great.

@TheTechnologyZone Год назад

Glad it helped

@prem2086008 2 года назад

This is an awesome video... Accidentally I flash the wrong firmware in AC 1750. I follow this video it's perfectly working and I am able to bring it alive ....that bro keeps it.

@TheTechnologyZone 2 года назад

Glad it helped

@hihinko Год назад

perfect. Finaly a setup to debrick my Archer C58. it works ! Thank you

@ccmanic 28 дней назад

Thank you bro, you saved my ass :)). While installing flash, the modem got stuck and the flash was deleted. Thanks to you, I saved my modem again.

@syedwaqarahmad9447 Год назад

Excellent work, helped me to upgrade my TP Link Box. Thanks👍

@EmilsonLacht 9 месяцев назад

For those who get the black ICMP "Destination unrechable (Port unreachable)" message: I tried using a different tftp program called tftpd. Selected the destination of my firmware file, selected the network and turned on my router while holding the reset button. Then it started the transfer. All for the C7 AC1750 V5

@parthibanilango 3 года назад

Excellent.. I was able to de-brick my Archer C6 V2 router, which got bricked after attempting to switch from OpenWRT to stock firmware.. Wireshark really helped in identifying the network issue..

@TheTechnologyZone 3 года назад

Glad it helped

@Yahfz 3 года назад

can you please let me know how you fixed the network issue? I can't get it to show on the tftp.

@PremMallah 2 года назад

Can you share the filename please

@kaushal616 Год назад

Same problem. But my case not showing tftp in wireshark any one help me

@LEE-ty8vq Год назад

@@kaushal616tftp also is not showing in Wireshark for me also. Did you find a fix? Please help.

@CallMeAnisse 5 месяцев назад

I following the instructions exactly as described, but regardless of how many times I change the computer's Ethernet IP address to the one specified, Solarwinds doesn't identify the address, and instead defaults to 0.0/24. If I try adding another one, it will change the values to 0.0/whichever port I declared. It refuses to altogether bind into 0.66, no matter what I do :c is there something I'm doing wrong? I only have the default Realtek controller that was provided with the laptop, so the computer lists the bluetooth controller, the ethernet one, and the wifi, with only the ethernet enabled but still not working

@R4nd0m1z3r 2 года назад

amazing tutorial, thanks buddy

@fernandomurillo9054 2 года назад

Double check you guys downloading the correct firmware (“Archer A7” in my case). On the label of the router should say if it’s c7 or A7,… V5, V4… etc. And holding rest before turning on router. The firmware name on the TFTP-Root for mine was still “ArcherC7v5_tp_recovery.bin” even though my firmware is A7.

@dh2032 2 года назад

second, third, forth check will not do any harm

@lucian3676 3 года назад

Thank you so much, there was something wrong with tftpd and this worked. But it only worked with Bind to all addresses and send/receive enabled

@TheTechnologyZone 3 года назад

good

@Wieczor178 2 года назад

You are a Legend thank you :) had the same problem worked only with binge to all addresses :)

@2theb0ne Год назад

This worked great! thank you!

@TheTechnologyZone Год назад

You're welcome!

@astraman212121 3 года назад

thank you much you saved my router ..

@TheTechnologyZone 3 года назад

Glad I could help

@edgarheertje 2 года назад

Thanks. Your firewall disable did the trick.

@ozzbetto 24 дня назад

Man thanks so much for this!!

@airitanaka195 Год назад

you saved my router thank you

@maecflyProductions 2 года назад

any solution for c50 v4 ? nothing worked for me, I am officially frustrated, the stock fw flashed with tftp but the router won't boot properly, the power LED is the only thing that is working by now :(

@gwazizul 10 месяцев назад

Bro my archer c64 has been bricked aftar farmware update and its indigators are blinking...and not getting connection and not working reset button...now how can i unbrick it?

@luizfpq 2 года назад

Awesome video, thanks!

@TheTechnologyZone 2 года назад

Glad it helped!

@thoushif8052 3 года назад

Good job done. I used Tftpd.

@TheTechnologyZone 3 года назад

Glad to hear

@Siddharth007fication 10 месяцев назад

My bro, you rock!

@jubaidhossin8073 10 месяцев назад

What a video great. Thank you

@pantau9018 2 года назад

Im trying to flash OpenWRT to Archer C2 (AC750) but always got error like "TIMEOUT waiting for Ack block" in tftp64. Any idea what im doing wrong?

@askiaahmed6709 2 года назад

Hello, My router is a Tp-Link M7350 mobile router and doesn't have an ethernet outlet. It starts and stucks at showing the Tplink logo and doesn't boot. Is it a chance to flash it back? The reset button didn't worked. Thanks for a tip.

@S-I-R-E 2 года назад

hello, I think I have bricked my archer c6 v2 when I tried to flash the stock firmware directly from the openwrt firmware and I followed everything you did in the video but I cannot get it to do anything. Only the power light comes on and nothing else. I really need this router running as I can not buy a new one as of now. I tried openwrt because my router takes too long to log into my pppoe account. please help me.

@Faceless959 2 года назад

My ques is should i hold the reset button all the time? Or just hold the reset button atart the router and release it?

@sureshmendis1763 3 года назад

hi i have a tp link m7200 pocket router .can i debrick in this same method?

@shatabdidas516 2 года назад

Hello, Thanks for uploading this. Is there any way to contact you regarding a problem I am facing with my router firmware? Thanks.

@mikeware3785 2 года назад

It says port unreachable even after i disabled firewall, any ideas?

@KadargoGaming 2 года назад

I have a TP-link Archer ac3200, while I was updating the router the power supply disconnected, causing brick. I tried your method over and over, router won`t communicate with Tftpd64. Any advice?, BTW I am subscribing

@SukrinoRahman 2 года назад

This only works if your device is still able to turn on am I right? What if your device couldn't completely turn on?

@shivambaldha Год назад

Great job explaining this process but my tftp does not go till last packet and tftp server drops what to do???

@LEE-ty8vq Год назад

HELP! Did you find a solution?

@shivambaldha Год назад

@@LEE-ty8vq no had to send my router service centre (got covered in warranty)

@LEE-ty8vq Год назад

@@shivambaldha I thought booting OpenWrt to it voids the warranty?

@shivambaldha Год назад

@@LEE-ty8vq i was not changing the firmware, just upgraded it while power went out in the process

@airwrecktion Год назад

Will this work even if my tplink c8 archer is bricked to the point where my computer won’t even recognize (network unidentifiable) or connect to its network?

@harshamannewton 2 года назад

thanks man u tha saviour. much appreciated.

@TheTechnologyZone 2 года назад

No worries!

@balkan77forum66 2 года назад

@@TheTechnologyZone bro can u help me I have archer c7 v4

@TheTechnologyZone 2 года назад

@@balkan77forum66 What help u need?

@Manihsi 2 года назад

Can you show how to firmware upgrade tplink archer c7 v2 to 2020 ?

@SaiKrishna-ne4lc 2 года назад

Hello, my router is TL-WR850N , My router power button is blinking a lot and internet connection is not able to connect. I'm not getting any firmware upgrade file in the official website, what can i do.

@EdwinRiosSanchez84 11 месяцев назад

Thanks you!👌

@allaboutentertainment939 2 года назад

brother will it work in tp link wr740n

@condor13 3 года назад

will this work on archer ax10? i have a cfw on it from my isp and have some nasty limitations. Its not bricked. The "upgrade fw" from menu is disabled. Thanks

@akashteotia1363 6 месяцев назад

Did it work?

@condor13 5 месяцев назад

nope@@akashteotia1363

@InfolkWell 3 года назад

I did this but all of its lights are just blinking now

@jotajunnior4253 2 года назад

does it work on ec320-g01 tp link?

@mandyodd Год назад

I bricked archer c60 v2 by uploading zip instead of bin file. Tried all methods no response on tftp watch, please help

@wsteelenyc Год назад

I can't figure out how to get my tp-link AX3000 into recovery mode and tp-link refuses to tell me.

@lukegrossotron8015 Год назад

my archer c6 v3.20, does not turn on can not find TFTP WIRESHARK ? DO I NEED 16MB BIOS FILE? PLYSSSSSS

@doitanas3763 Год назад

After following these steps, my Archer C50 V4 is stuck on only power light. I've tried tftp procedure mutiple times but result is same every time. Kindly help!

@nikunjsharma460 3 года назад

Nothing shows up in wireshark pls help

@user-ms7gk5lc6y 11 месяцев назад

bro what if when the lan is plugged in nothing even shows up, i'm using tl-wr840N

@tanujjjjjjjjj 11 месяцев назад

Hi, I'm getting error on tftp 'dropped because peer didn't respond' can you help

@yonatanabate1755 Год назад

my tp link C7 AC 1750 version 2 sun light stack (stay on sun llight) and 5ghz light on but there is no wifi name list showing how to fix this proble anyone help me please

@subratkumarbeura7017 2 года назад

Will this work for TP-Link WiFi 6 AX3000 Smart WiFi (Archer AX50). My router with this model is bricked

@TheTechnologyZone 2 года назад

try it out with correct firmware version

@wsteelenyc Год назад

@@TheTechnologyZone This did not work for my TP-Link AX3000. I've literally tried everything. Did you figure out how to get it into recovery mode. Supposedly there is a way with AX3000 routers, but tp-link won't tell us.

@user-fh5hs3nq2u 5 месяцев назад

My Pc dont have tftp columm in fitlrewall settings

@davisxclusive8409 Год назад

I have TP-LINK ARCHER m600 v2. Does anyone know how to unlock it. Mine is network locked

@xisan6871 3 месяца назад

Is this applicable for archer c20 v5 which got dead bricked(no led too) after installing openwrt?

@ccmanic 28 дней назад

I did it for wr941 hp and it worked. After making the port settings, when the modem is turned off, hold down the reset button and press the power button, the modem goes into flash mode. Change the name of the bin file you downloaded. like "TLWR941HPv2_tp_recovery.bin"

@Wieczor178 2 года назад

Ohh crap my stopped at 10335 and never showed last packet :( - shitty usb network adapter caused issues

@jishan17186 3 года назад

I have a TP Link range extender RE220. After a firmware update it restarted but now only the power light is on. Nothing else happens. It does not even reset using the reset button. Can you help me?

@TheTechnologyZone 3 года назад

You can follow the same method mentioned in this video. Possibly it has bricked

@jishan17186 3 года назад

@@TheTechnologyZone i just tried. But holding the reset button and then powering on, nothing happens after 5 seconds in the log. I changed the id address to 192.168.0.66. Am i missing something?

@TheTechnologyZone 3 года назад

@@jishan17186 TP-LINK RE220 is a wireless extender not router

@jishan17186 3 года назад

@@TheTechnologyZone i mentioned in my first comment that it is a range extender. I was wondering if this channel can help me. I think the ip adress has to be different. Not sure though.

@TheTechnologyZone 3 года назад

@@jishan17186 You mentioned sorry. This video will not help in that case. Extender and router are working in different ways.

@Goldrig 3 года назад

i have same archer c7 v5, i'm following your step (reset and power) and nothing happen on wireshark on tftp protocol, please help me 🙏🙏

@TheTechnologyZone 3 года назад

disable all other network interface and do the packet capture. Put IP in the same range

@maffigabri 2 года назад

@@TheTechnologyZone Same problem, not sure what you mean with "do the packet capture"

@allaboutentertainment939 2 года назад

Sir still my router blinking lights plz help me sir i dont have money to buy a new router plz please all lights except power model tl wr 740n v4

@TheTechnologyZone 2 года назад

I don't have that model. You can give a try with the corresponding firmware model.

@allaboutentertainment939 2 года назад

@@TheTechnologyZone sir my router version is 4.27 how i download the correct version sir please help me

@allaboutentertainment939 2 года назад

@@TheTechnologyZone and sir there is not a model version like 4.27 on official website to download a exact version of my router i tried tftp method 20 times after firmware flash all lights are blinking router is rebooting again and again

@nefissakhedher1380 2 года назад

After flashing the original firmware, and getting the last block, my router goes back to a state where The LEDS stay on for 1 second, then they go off for 2-3 seconds. I followed all steps you mentioned, I even tried loading dd-wrt firmware as someone said they tried that and worked for them... nothing seems to be restoring my router, what is your guess about this please??

@nefissakhedher1380 2 года назад

I also dont see that in Wireshark that the router is being flashed

@manbash05 Год назад

@@nefissakhedher1380 Im having this same issue... im using a tplink mr3220 v2

@nefissakhedher1380 Год назад

@@manbash05 heyy, I fixed the issue by unbricking it via serial interfaces. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-V-ltOlzC0Hw.html&ab_channel=TechRodent

@LEE-ty8vq Год назад

@@manbash05Hi did you find the solution to this? Please help

@lalospidey 2 года назад

Hi , i have a archer c20 v5 i follow the steps in the video , the file tp_recovery (in this case) gets tranfered into the router but nothing else happens

@TheTechnologyZone 2 года назад

what is showing in wireshark?

@lalospidey 2 года назад

@@TheTechnologyZone i just fixed it needed to use another firmware image , thanks

@benjiang6493 2 года назад

@@lalospidey can you share the solution? I got the C20 V5 and brick it.... use TFTP to refresh latest OEM firmware and latest openwrt, none of them working. Thanks

@lalospidey 2 года назад

(TPLinkArcherC20V5.zip )

@mobiletechbangla 2 года назад

man i have the same problem , how did u solve it? is the file name tp_recovery.bin wrong? or something else? plz reply bro :( or which file should i use?

@rafeedannoor6921 3 года назад

Can I use this system on my tp link 841n?

@TheTechnologyZone 3 года назад

Please make it clear. The procedure is same if you have bricked the device.

@rafeedannoor6921 3 года назад

I did it 😁

@masternas777 Год назад

Is it for any model tp link?

@TheTechnologyZone Год назад

yes

@LordVladimidian Год назад

destination unreachable length 113 :(

@yousaf662 3 года назад

does it work for lb-link please reply anyone??

@TheTechnologyZone 3 года назад

TP Link

@prashik2486 3 года назад

It didn't worked on tp-link Archer mr200...😥😥😥

@kumar0466 2 года назад

Same with me… in wireshark not detecting tftp protocol I tried allowing tftp port 69 on windowsill firewall I tried turning off windows defender & antivirus & firewall services Installation tftp client still same problem

@Linatros 2 года назад

You find solution? my archer mr200 have a 169.254.x.x Ip and only one light of LAN port is on. Have the firmware for an v1?

@prashik2486 2 года назад

@@Linatros I got a replacement due to a warranty.

@vivekkashyap7293 3 года назад

Please do tha same for tenda f3 router 😭😭🙏🏼🙏🏼

@TheTechnologyZone 3 года назад

Unfortunately I dont have that router

@shahinsha 2 года назад

Is it solved

@shahariasamir3512 3 года назад

its load a blank page

@TheTechnologyZone 3 года назад

something wrong with your procedure

@Yahfz 3 года назад

When i use wireshark and i add the TFTP filter nothing shows up..

@TheTechnologyZone 3 года назад

May be it has not reset

@natturious 3 года назад

Make sure that your LAN is configured to run at 10 or 100 mbps, I had the same issue. LAN on my Motherboard is setup to 1 GBPS so I didn't get any reading on TFTP, after I changed the speed to 10 Mbps, it worked for me.

@nikunjsharma460 3 года назад

Bro same here did you find any solution

@Yahfz 3 года назад

@@nikunjsharma460 nope. if you find a fix let me know

@prashik2486 3 года назад

@@natturious I changed the speed to 10mbps, still it didn't worked!😭😭😭

@jesseavila1888 2 года назад

Ok I’m just gonna buy a new one

@waitandhope Год назад

My god

@code-inc Год назад

simple process you just made complex.......

@TheTechnologyZone Год назад

Ok. You can upload a video to make it simplified.

@touhidmashood4875 2 года назад

Script it first and learn bloody facing english

@TheTechnologyZone 2 года назад

I decide how should I record. Get the hell out of here.

@CtrlAtlDel 2 года назад

If you can't appreciate the effort being put in whatever ways, fcuk off. You are not paying him anyways

@umarmunir361 2 года назад

Bro meri router tplink tl wa 701nd hai woh bricked hai main osay lan kay sath computer kay sath connect karta ho unplugged show hota hai device ki lights on and off hoti hai main kya karo unbricked nhi horahai help main sand me social instagram account