How To Update Sync 3 to Sync 3.4 Over WIFI | Beginner's Tutorial - EASY!

Подписаться 7 тыс.

Просмотров 102 тыс.

50% 1

Sync 3.4 has been much needed update for Ford Vehicles. Sync 3.4 update is very easy to install. This sync 3.4 update tutorial works for all Ford vehicles (F150, Mustang etc) running at least Sync 3.0 system.
Sync 3.4 update will allow your Ford vehicle's infotainment system to run smoothly and give you new features. Sync 3.3 is what I have on my 2019 Mustang GT, so upgrading to sync 3.4 was much needed improvement.
Sync 3.4 update can be done in 3 ways. We will be focusing on Sync 3.4 update via WIFI today. This method of Sync update is by far the most convenient way to go for your latest sync update on your Ford Vehicle as it does not require any technical knowledge.
WATCH MORE:
SYNC 3.4 USB: • How To Update Sync 3 t...
SYNC 3.4 Overview: • SYNC 3.4 Review | My F...
FordPass Tutorial: • How to Setup and Use F...
//MODS:
Corsa Xtreme Exhaust: amzn.to/37oFdzT
//DETAILING PRODUCTS USED:
Meguiar's Gold Wax: amzn.to/3s0Nkuc
Meguiar's Tire Cleaner: amzn.to/2LYpFeq
Meguiar's Wheel Cleaner: amzn.to/2ZtSbYu
Meguiar's Quik Wax: amzn.to/2NFI3ZZ
Meguiar's Car Wash: amzn.to/3ptFVBV
Meguiar's Interior Detailer: amzn.to/2Zxpg5L
//CAMERA GEAR USED:
Canon T3i: amzn.to/3poIBAQ
Sigma 17-50mm F2.8: amzn.to/3pqW3UV
Canon 50mm F1.8: amzn.to/3u8HYPl
Tripod: amzn.to/3pvjr3w
Lavalier Mic: amzn.to/3k0Uaxa
Mpow Car Mount: amzn.to/2NoOEIE
SanDisk Memory Card: amzn.to/3u5flTc
SUBSCRIBE:
ru-vid.com?sub_co...
INSTA:
/ red5oh.official
Disclaimer: The links provided in the description may be affiliate links. If you purchase a product, I may receive a small commission. It does not cost you anything. Thank you for supporting Red5oh as I continue to bring more free content to you.

Авто/Мото

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 189

@Red5oh Год назад

Try this updated method - works on all ford vehicles! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kqKaadzYXXg.html

@tlitesworld 3 года назад

You keep the mustang information. Great video my friend 💯

@Red5oh 3 года назад

Thank you sir!

@BackyardBMX73 3 года назад

I wasn't aware there was a new version. That may be good news for me, cause the RDS info stopped showing with the radio station. Hopefully that'll get fixed by updating. Thanks for the video!

@Red5oh 3 года назад

Yeah the update should help out with bugs and issues so it’s definitely worth checking. You can do it via usb too if wifi isn’t strong. Hope it works for ya!

@BackyardBMX73 3 года назад

@@Red5oh right on, thanks again!

@MasterMindVlogsOfficial 3 года назад

Great going bro.... Nice info..👍

@Red5oh 3 года назад

Thank you!

@BLACKKNIGHTMUSTANG 3 года назад

Awesome info Bro

@Red5oh 3 года назад

Thanks for checking in man! Glad you enjoyed the video

@Ab3lardo Год назад

🤤

@bigkev2613 5 месяцев назад

Ford just told me I can't update to 3.4 I have 3.0 in 2019 Expedition platinum....can someone please help 🤦🏾‍♂️

@Red5oh 4 месяца назад

Watch my cyanlab video that should help you upgrade

@jrrogersstang4696 3 года назад

Looks great...going to try to add that to my mustang if possible

@Red5oh 3 года назад

YeahI highly recommend it!

@jrrogersstang4696 3 года назад

@@Red5oh next mod 🔥🔥🔥🤤

@Red5oh 3 года назад

@@jrrogersstang4696 yes well worth it! It’s so much snappier. You have the base model right? So you’d need sync 3 conversion I think hellhorse sells ones

@jrrogersstang4696 3 года назад

@@Red5oh ok going to check it out

@Redline5.0 3 года назад

🔥🔥🔥🔥

@Red5oh 3 года назад

Thank you for watching!

@primofx2sport 3 года назад

Solid bid for the average Joe. Beats them having to hit the dealer.

@Red5oh 3 года назад

Agreed saves a trip to the dealer! USB version also require the avg Joe to know what they are doing. Wifi is like updating your phone very simple

@johnwaugh4680 3 года назад

@@Red5oh I update my sync3 vers. 3.0 by wifi all the time but all it does is update the build no., currently 20204. It never updates the version to 3.4.

@Red5oh 3 года назад

@@johnwaugh4680 yeah that’s strange. What car do you have?

@johnwaugh4680 3 года назад

@@Red5oh 2017 Ford Escape Trend AWD...Australia, but sync3 should be the same. To my knowledge the only way it can be updated to 3.4 is through Cyanlabs.

@Shadow-pd9vl Год назад

Work and for Ford Edge ST Line to,but you must drive about 50min.To parkplace this auto stop alone in 30minute.Sync 3.4 work really fine for me and is not a lie.

@Shadow-pd9vl Год назад

Model 2018

@Red5oh Год назад

I’m glad it worked for you! It does take a bit patience

@randihull4706 Год назад

Trying to update my 2019 EcoSport that hasn't been updated since 2019. I know there's a new update available, but when I scan for updates it keeps saying software is up to date. Connected to home wifi with excellent signal strength. Any advice? I really don't want to go the USB route if I don't have to because I have a Mac. Also, when looking at the software version it's def still showing the old version, double checked that as well.

@Red5oh Год назад

I would try entering your vin on ford's official website to 100% confirm that there is a new update for your vehicle

@deborahhart8457 2 года назад

I've tried to do it over WiFi however scanning for updates it's taking a long time to scan. Is this normal? 🤔

@Red5oh 2 года назад

Is the car a bit far away from the house maybe the wifi connection isn’t strong? If nothing comes up I’d suggest using usb method. I have a tutorial on that ad wel and it’s pretty easy to do it via usb

@MatthewMitchell01 2 года назад

Does anyone have the issue where it takes absolutely forever to update? Even though my wifi is super fast and my car is parked as close to the router as possible?

@Red5oh 2 года назад

Is the update progressing or does it just shut off after certain time?

@MatthewMitchell01 2 года назад

@@Red5oh it seemed like there was no progress at all. I left it for over an hour with nothing. Then just randomly the bar jumped to half full and started the instillation. Pretty weird.

@MatthewMitchell01 2 года назад

I have really good internet and can usually maintain 20MB/s download speed so it should have made quick work of this update.

@coreypendergrass6713 2 года назад

I have a 2019 F-150 running version 3.3. I use my phone hotspot to provide my system with a Wi-Fi connection. I have done this in the past to get it up to version 3.3. but it doesn't seem to want to download 3.4. is it available for all Fords in 2019?

@Red5oh 2 года назад

It seems like F150 arent eligible for 3.4 yet. Even though my mustang is also a 2019, it’s weird they’d restrict f150 updates

@stephenhorton2617 Год назад

I have this same issue. Every time I start the truck it says connect to wifi to update. But its already connected, won’t update…. tried Ford support, chat, everything. They have no solution and the support SUCKS. Thanks Ford!!!!

@dashtyATG 3 года назад

Hy thanks again sir. How about the navigation dose that includes all in 1?

@Red5oh 3 года назад

No navigation update is separately. Dealer can do it for free or you do it by downloading from Ford website as wel I believe

@dashtyATG 3 года назад

@@Red5oh ok thanks brother there a guy here where i live doing it himself I've some video. U need big space 32 geg flash drive to do so.

@Red5oh 3 года назад

@@dashtyATG yeah I used 32 gb usb as well. You can do it with a smaller size usb but it’s recommended to have more in case to avoid any issues

@dashtyATG 3 года назад

@@Red5oh thanks for replying me back and sharing your knowledge I'd love all your videos. You can see my little page below. Thanks gain. facebook.com/dashtyatg/

@BLK_GOD 2 года назад

How long does it take? It says scanning for updates forever.

@Red5oh 2 года назад

Scanning for updates should be 5-10 mins at most unless your wifi signal is very weak

@BLK_GOD 2 года назад

@@Red5oh had to use a flash drive thanks

@earlyblackmz 3 года назад

I have a 2018 F150 and it only has sync 2.3. Will this update give me 3.4? Other videos say you have to at least have 3.0.

@Red5oh 3 года назад

I would try scan for updates option. I’ve heard some models are able to upgrade to sync 3 first but some you cannot. You’d need to be on sync 3 to get sync 3.4. But if your model allows the upgrade it would tell you sync 3.0 is available

@MLedeboer 2 года назад

I'm in the same boat... Were you able to figure it out?

@aru-YT Год назад

@@MLedeboer Sorry if this is late but you can't upgrade from Sync 2 to 3 or vice versa with software, you'd need to replace the physical infotainment system

@dogtagz_2849 11 месяцев назад

Ford ‘18 Mustang EcoBoost. I’m right next to the router (maybe 10/15 feet away and great connection), and it’s on version 3.0, but the scanning process has been taking over 15 minutes. (I know that for sure since my car almost went into shutdown mode after being on for so long). It says it’s just scanning for updates and the buffer sign has been spinning the whole time. Is this normal?

@RyanZirnheld11 10 месяцев назад

Mine is doing that as well, did you ever figure it out?

@dogtagz_2849 10 месяцев назад

No.. I tried two other times and no luck.. I’m considering being it into the dealership on my next day off just so they can diagnose it, maybe fix it the same day. I promise to keep you informed when I know more on my end though!

@RyanZirnheld11 10 месяцев назад

@@dogtagz_2849 thanks! It’s been driving me crazy not being able to update this glitchy infotainment

@Red5oh 10 месяцев назад

Wifi can be a bit choppy sometimes as the wifi module in our cars isn't as strong as the ones in the phone. I would try the USB method to see if that helps

@KLAMATH32 6 месяцев назад

Awesome video! One question. Why did you use a thumb drive and not just update it via wifi like you're showing in this video??

@Red5oh 6 месяцев назад

I’ve done it both way. I have some videos on usb method too. They both work great but depends on needs. WiFi is easier for sure but usb is tried and true

@Ollie8210 Год назад

Hi. I am running Sync 3.0. I have access to Wi-Fi, but it does not pop up with any updates to me. What do I do?

@Red5oh Год назад

What ford card do you have? Does it show no update found or it keeps searching?

@Ollie8210 Год назад

I don’t have navigation. I used your Cyanlab video and used that method. It worked like a charm. It’s frustrating that Ford doesn’t make their software good enough to just make a simple update. But a team of devs can do that in their spare time. Amazing

@OG_Honda_Grom Год назад

On sync 3.0 there is no button to search for new updates only can turn on automatic wifi updates how do I know if it’s downloading? I connected to wifi and parked close to house went to update on mobile apps and it says updating apps and spinning. Circle but that’s it??

@Red5oh Год назад

As long as the car is within wifi range it should be upgrading, but not having a progress bar makes it a guessing game. I'd suggest USB method if wifi doesn't work after couple attempts.

@umayfindyourself9381 Год назад

Well done but, scanning for updates over home wifi has been going on for almost an hour...?

@Red5oh Год назад

What vehicle do you have? Try ford website with your vin to see if it’s due for an update or not

@WilbertRamos777 2 года назад

Hello there I have a 2017 f150 xlt how can I do this?

@Red5oh 2 года назад

I think 2017 f150 aren’t eligible unfortunately

@chriswalker745 Год назад

2016 f150 lariat I have navigation and sync 3 can I update to 3.4

@Red5oh Год назад

You can but you’d have to use the cyan labs. I have a video on that check it out!

@and526625 2 года назад

I tried doing this today, but scan for updates took far too long, what could be the problem? WiFi was connected btw

@Red5oh 2 года назад

I would try putting your vin number on fords website for sync update to see if it’s eligible for upgrade. It’s really strange it’s not download the update via wifi

@laurenhall1609 Год назад

I’m having this same issue, did you ever manage to sort it?

@and526625 Год назад

@@laurenhall1609 i ended up getting ford to do it as, looking at the log book, the update is part of the service which they weren't doing, but all updated now by ford dealership

@swamibeyond6382 2 года назад

Very helpful, thank you!... "NEED TO KEEP THE CAR RUNNING", REALLY...for 20, 30 minutes!? Just started the procedure without car running and the display shows downloading update, so I got out of the car...is the download kaput?...yes, I found it went kaput. Will try usb

@Red5oh 2 года назад

It should resume once you get back in. It's just best practice to ensure car is running while the update is being performed to ensure no disruptions.

@swamibeyond6382 2 года назад

@@Red5oh Thanks, it is not resuming, now on choosing scan for updates, it goes on for over 10 min so, I turn it off.

@Red5oh 2 года назад

Were you able to get it worked?

@swamibeyond6382 2 года назад

@@Red5oh No, I think I'll let it go...thanks

@tw8644 2 года назад

I've been in my garage and wifi is strong...When I scan for updates nothing appears even tho I only have 3.0... Would like 3.4... Any Ideas 2017 Raptor

@Red5oh 2 года назад

It seems like most people did not get 3.4 on F150 unless they had 2020 model or newer

@tw8644 2 года назад

@@Red5oh weird bc on ford website when I put my VIN in it says there’s an update available.

@Red5oh 2 года назад

@@tw8644 does it say it’s 3.4?

@tw8644 2 года назад

@@Red5oh I think it just says update avail.. doesn’t say what

@masonturner3784 3 года назад

Sweet, 2019 f150 with 3.3......scan for updates and nothing ever pops up 🙄

@Red5oh 3 года назад

Yeah that’s strange given my 2019 mustang with 3.3 had the update. Try using the usb method and see if Ford website has it. I have a tutorial on it

@miketassone3991 2 года назад

When I hit scan for updates I get the spinning wheel like it’s searching, goes for a minute, and then just disappears and nothing happens

@Red5oh 2 года назад

What vehicle do you have and what sync version are you running?

@dionnamorris6367 2 года назад

My 2019 Fusion is doing this exact thing.

@Audace1400 Год назад

Doing this right now. I don't have the engine running, just have it plugged into battery charger so it doesn't drain too much. I have to touch the touch screen every few minutes so the vehicle doesn't automatically turn off during the download.

@Red5oh Год назад

That’s a smart idea putting it in the battery charger. How did the update go for you? Any issues?

@Audace1400 Год назад

@@Red5oh Went ok no problems. Just have to sit in the car during the download/update and touch the touchscreen every few minutes so it doesn't auto turn off. Took close to an hour.

@TheBryceJohnston 11 месяцев назад

@@Audace1400i’m debating if I even wanna update cus idk how to do this and i don’t want to mess nothing up or drain the battery

@Audace1400 11 месяцев назад

@@TheBryceJohnston you will be ok.. hopefully you have a battery charger

@lacrimamg9206 Год назад

Scanning for Updates Message is showing for About 1 Houre and Nothing Happens ?!? Is That normal My sync Verson is very old.

@Red5oh Год назад

What sync version you have and do you have strong wifi connection?

@stepside2839 3 года назад

Why not just turn your car On, without starting it. I’m not worried about a weak battery, since it is on a BateryMENDer when in the garage.

@Red5oh 3 года назад

Yeah since it’s on that then it would definitely work without wasting gas. Otherwise it’s better to leave the car in to avoid unnecessary battery drainage

@coyoterob2839 2 года назад

My wifi one won’t work for me in my 2018 mustang premium, I have WiFi in my garage and it keeps saying it scanned for the update and nothing came up for an update

@coyoterob2839 2 года назад

I tried the usb version as well using a Mac n all attempts never worked

@coyoterob2839 2 года назад

Should I jus take it to the dealer

@Red5oh 2 года назад

What is the issue you are experiencing with the USB? To me that seems to be the best way. You can certainly take it to the dealer, but it's more time consuming.

@coyoterob2839 2 года назад

@@Red5oh yeah idk it just doesn’t work for me I tried usb master reset on the sync 4 and I tried to do the WiFi one

@spongebobsquarepants2980 2 года назад

Can th9e be done on the 2016 mustang

@Red5oh 2 года назад

I think sync 3.4 is compatible with 2017 and up mustang. I’d check with your vin on the website to be sure

@darweez Год назад

Mine won't load the update. Just shows "checked and today's date" I'm on my mobile hotspot btw. Still on 3.0

@Red5oh Год назад

What vehicle do you have? After certain models ford doesn’t officially put an update like 2017 mustangs can’t get sync 3.4 while 2019 can even though same sync software. Check out my video on sync iodate through cyan labs. That will bypass it and you can get the iodate

@richardowens6315 2 года назад

Will not find update on sync 3 for 2016 f150

@Red5oh 2 года назад

I think F150 doesn’t have 3.4 unless 2019 or newer unfortunately

@SquattingSamurai Год назад

Nothing happens when I click on “Scan for Updates Now” in my 2019 Mustang. Anyone knows how to solve that issue? I don’t have a USB stick and I don’t want to buy one just to update my cars infotainment system 😅

@Red5oh Год назад

Are you connecting to the wifi with strong enough wifi signal?

@SquattingSamurai Год назад

@@Red5oh yes

@calvinray5914 2 года назад

Ford says you don't have to leave th vehicle running to perform updates

@Red5oh 2 года назад

Interesting. Yeah it helps to leave it on to avoid battery drainage but not required.

@jdoolez914 2 года назад

During the actual update did anyones screen turn off ? Is the screen going to tur on in 30 minutes?

@Red5oh 2 года назад

It will turn off but should come back up. Did yours not do that?

@jdoolez914 2 года назад

I got the update all installed. Build 20204. My phone won't fucking connect through Bluetooth. "Connection not stable"

@Red5oh 2 года назад

@@jdoolez914 have you tried connecting a different phone to see if that works? Otherwise I’d try a soft or master reset that usually helps

@jdoolez914 2 года назад

Yeah. Ford said to bring it to a dealership. Pain in the ass

@Red5oh 2 года назад

@@jdoolez914 I’d try the master reset or soft reset as it could save you a trip dealership. I did that for when Apple car play was acting up. I have a tutorial on it as well

@SirenS550 3 года назад

I’m about to live in a mustang 😭 if that’s what it takes to get one

@Red5oh 3 года назад

Hahah! I hope you get one soon man. Keep up the hard work and your dream will come true

@alexdonhauser8870 2 года назад

What do I do if the update doesn't pop up?

@Red5oh 2 года назад

What vehicle do you have? If it’s not eligible for the upgrade it may not show the 3.4 update

@CurtisWesbrook 2 года назад

I don't even have the "Scan for updates" button. I have confirmed via Ford that there is an update available. I am connected to my home wifi, and have automatic updates turned on, but the only two buttons I have are "Automatic System Updates" and "View Current Software Version." Thoughts on why I can't even scan?

@Red5oh 2 года назад

If you click on automatic system updates, is there a way to turn it off and then search manually? It's strange that the option to scan isn't there

@CurtisWesbrook 2 года назад

@@Red5oh Yes, I can toggle it on and off, but nothing changes either way. Also, where it shows the date and time it last scanned for updates, it says July of 2002. A) It's a 2016, B) I don't think SYNC was a thing in '02 lol.

@rebeccakohler2475 2 года назад

I have this exact issue, mine says last checked for updates in October of 2002 lol. My dealer has updated it twice and I don’t know how they did it cause my USB port doesn’t seem to work either! Guess I’ll take it back and see if they can keep updating it 🤷🏼‍♀️

@cameronketch2363 2 года назад

Did you figure this out? Same issue here. 2002 and all...

@CurtisWesbrook 2 года назад

@@cameronketch2363 I never did. I was going to try the manual update via USB drive, but it can only be done on a PC, so my Chromebook wouldn't work. I gave up after that.

@elaissimarouane9250 Год назад

I did this update to my ford kuga but the navigation is blank

@Red5oh Год назад

Try unplugging the battery and see if it resets it. Is it working fine now or still issues?

@elaissimarouane9250 Год назад

@@Red5oh its working well bro ... besides i want to know howa can i activate the vocal command of the navigation

@xIIsTReeTIIx Год назад

2016 Taurus and it doesn’t search for new updates

@Red5oh Год назад

Try the ford website to see if it’s eligible. Alternatively you can watch my cyan lab video that allows you to update even if not officially eligible

@MattySlimz 2 года назад

On 2020 up Ford models (Escape in my wife’s case) I just connected to the interfaces integrated modem via my phones mobile hotspot, it updated within 10 mins. Connecting to my home network wasn’t feasible, and when I could get signal it wouldn’t update. Just a heads up for folks. 👍🏼✌🏼

@Red5oh 2 года назад

That’s some great info! Thanks for sharing that with us. I’m glad yours updated fine and can experience the sync 3.4 on your ford vehicle!

@davet231 Год назад

Had issues upgrading to 3.0 on my ‘16 FoST, tried NTFS, FAT32 etc formatting and still couldn’t get it to take. Ended up taking it to the stealership to pay $150+ to update it (was trying to get CarPlay had the updated USB module), after they allegedly updated it I threw in the USB module and no CarPlay 🤬. Ended up buying another flash drive and it worked first try. Morale of the story if you’re having trouble with a USB update try a different flash drive.

@Red5oh Год назад

Interesting that dealership would do that. I guess they call them stealership for a reason! I am glad a new USB helped out. Given how cheap USBs are these days it's worth a shot for anyone having issues!

@davet231 Год назад

@@Red5oh Yeah needless to say I will never deal with that dealership again. I was going to raise hell and get my money back but decided it wasn’t worth the hassle. I work nights and going to another city to fight over it when I need to be sleeping just wasn’t worth it.

@noobovsky420 Год назад

How hard is it to check the version ? Not hard at all. You need to use ExFat and not fat32. So you did it incorrectly

@nunziorose1749 3 года назад

I don't have to I'm waiting for my 2021 6 speed manual mustang in may.😁

@Red5oh 3 года назад

Haha yes you’ll get it from the factory! I bet you can’t wait for the brand new car. Hope delivery goes smoothly

@nunziorose1749 3 года назад

@@Red5oh Thanks buddy. 🙏

@Red5oh 3 года назад

You’re welcome!

@treesteeze149 2 года назад

Mines maxed @ 3.0 will not scan for 3.4

@Red5oh 2 года назад

What car do you have?

@treesteeze149 2 года назад

@@Red5oh 2018 f-150

@p0lodon 2 года назад

I have a 2018 mustang and the same thing is happening

@codyyates3424 10 месяцев назад

2018 f150 vers 3.0 hit scan, comes back in less than 60sec saying up-to-date. Have apple carplay and finally got it to stop kicking off phone to AM source

@nathanrobison3160 2 года назад

2019 Ford Fusion, scan for updates and doesn’t say up to date or anything run into this?

@Red5oh 2 года назад

Try the USB method if it's not finding anything. I have an in-depth tutorial on it

@Ronjonsensorrow 2 месяца назад

Mine doesn’t find the new uodate

@Red5oh Месяц назад

What car do you have?

@atomflyer44 2 года назад

Mine will NOT update over wifi for some reason.

@Red5oh 2 года назад

What car do you have?

@MashupKingMusic 2 года назад

@@Red5oh same I try loading scanning but nothing shows I got a Ford Focus ST Line X 2019

@74kimbo Год назад

Mine doesn't work for some reason

@Red5oh Год назад

What vehicle do you have? Does it say it’s found an update but doesn’t update?

@74kimbo Год назад

@@Red5oh 2015 ford focus estate 1.5.

@noso4609 Год назад

I love my mustang and most ford products but my God does sync 3 suck!!! My wife’s Jeep with UConnect blows it away not even close!

@Red5oh Год назад

Really? I’ve used Uconnect once with the Jeep Wrangler and didn’t find it much superior to sync 3

@joellemay4469 2 года назад

Ça ne fonctionne pas

@Red5oh 2 года назад

Wait what lol

@AprilBarnes 2 года назад

He says it didn't work

@Jaedrummer 3 месяца назад

Doesn't work

@Red5oh 3 месяца назад

Try usb method unseats or my cyanlab video if your car cant officially receive sync 3.4 update

@Italian81 2 года назад

Super fucking inconvenient

@Red5oh 2 года назад

How so?

@brentfields93 2 года назад

Bruh I’m version 2.2 😂

@Red5oh 2 года назад

Oh wow! What year is your vehicle?

@brentfields93 2 года назад

@@Red5oh 2017 fusion lol

@swanningabout 2 года назад

@@brentfields93 What's a bruh?

@AprilBarnes 2 года назад

@@swanningabout He means bro as in brother

@LynMaarouf 11 месяцев назад

Too much blither blather. Speak more clearly! And didn’t work for my car I will have to download to a USB

@Red5oh 11 месяцев назад

Lol you salty

@robertmcdonald6384 4 месяца назад

It's better for you to stay firmly anchored in nonsense than to put out sails in the troubled seas of thought. Your ship would sink within minutes with that rudderless mind of yours.

@Red5oh 4 месяца назад

Lol are you ok?

@Car1Sagan 2 месяца назад

My 2018 F-150 is stuck in Sync 3, version 2.3.18095. In Scan for updates now, it says "Scanning for updates..." for a long time & doesnt stop scanning @Red5oh

@Red5oh 2 месяца назад

Try the USB method or make sure your WiFi strength is good

@laurenhall1609 Год назад

I just waited an hour scanning for updates 🥲 still nothing. Ford website says there IS an update available 🤦🏼‍♀️

@Red5oh Год назад

What’s your car? Does the download initiate at all or just stick at scanning?

@laurenhall1609 Год назад

@@Red5oh hey, it’s a 2018 c-max titanium. It just sticks at scanning, I’ve tried over wifi and via usb and no luck 🙁

@Red5oh Год назад

@@laurenhall1609 I would try usb and download the official update from ford website and stick the usb in. That’s how I updated mine at first as it seemed more reliable than wifi

@laurenhall1609 Год назад

@@Red5oh I did this today and it recognised the usb but didn’t install the update. It’s so weird! Still on version 3.0 so I think the previous owner just didn’t bother. Booked in to a service centre next week but I’m hoping I can crack it before lol! Thank you for your help

@Red5oh Год назад

@@laurenhall1609 hopefully they don’t charge for an update as it’s supposed to be free but good luck! As a last resort you can try to follow my sync update video that utilizes cyan lab