People, I updated the screen and then the printer. It turns out I used the same memory card for both updates. I didn't get a blue screen, but everything came out in Chinese and in several languages overlaying everything. In the end, I formatted the microSD again and installed the screen update again, then I used the SD card that comes with the machine for the firmware and it worked perfectly for me so far.
Sir, you are a fing genius. I got an Ender-3 V-3 SE and it crapped out on me after I printed one thing. Your video relieved a lot of frustration for me.
The screen update went as planned, but I’m still getting the blue screen with no Creality logo when booting up the printer. After o my a few months, I guess I need to toss this one in the trash!
Not following.... You want to toss an SE in the trash over a FIRMWARE update issue? Just spit balling here, but, sorting out the firmware update, sounds like a better game plan. Or, putting a Nebula Pad on it.
@@3DRundownI added a nebula pad to mine, yet I'm uncertain if my printer took the updated firmware and also I can not find a good guide as to what parameter changes should be made to the slicing software ie changing gcode flavour etc. Any suggestions to my queries?
Sigh.... I really wish I shot a Nebula setup for the SE. I do have a Nebula here in the box. I'm gonna try, but, I'm so overwhelmed with things requiring my attention. It's hard being a one man show. I will try my best to cover that asap.
I don't know the specifics, but, Marlin and Klipper, are both under active development, and, I would very much want to keep Marlin up to date. Creality tends to fall behind as it is. I'd update it.
I did this earlier, and the LCD said it was updating and was always stuck at a certain percentage and would not complete. I then tried a different micro SD card and formatted it to 4096 allocation size, then copied the folder over and tried it again and it worked.
please help, going grazy here, i followed every step to the letter up to the firmware, but the languages options on the display do not have english and has lots of chinese things, please help
When doing the leveling, only numbers appear and not the leveling data as shown in the previous version, however when editing the leveling data it does show the information of the points where you level with the cr-tocuh?
Does the bed leveling work better running this firmware over the 1.0.4? I run 1.0.4 and need to edit the grid to get a good first layer on some spots on the bed.
@@johanflodkvist80 The same thing happens to me, the automatic leveling is very unreliable even after having leveled it manually, it usually changes the leveling by itself, that is, maybe in one print the first layer is perfect, but in the other with the same file it is slightly a little higher which can generate small gaps in the fill lines of the first layer, and I always have the doubt if the cr-tocuh is working as it should.
@@3DRundown yup, M420 S1 is present in the gcode. I guess our beds are just less flat than your bed 🙂 But Im looking forward to upgrading the firmware to see if that improves things.
Hello sir. The update is stuck at 0% on the screen. I've tried to format the memory card, also partition it for a smaller size, noting seemes to work. Any ideas ?
@@3DRundown It worked with a 8Go card ! Thanks. For the machine's firmware, it did something different, but I'll check if it's stil working as intended. Thanks for the help !
Im kinda stuck here. I installed the nebula AND the sprite extruder kit. But the thing is that the probe sits waaay further away than it does on all the other extruder heads (apparently). I can't find a fitting firmware for it though. Leveling is not possible for me now. Anyone with a fix out there ?
The SE already has a sprite extruder. I would leave it stock for the extruder. If your CR-TOUCH is too high, you will want to use a spacer, to lower it.
@@3DRundown Hey, thanks for the quick answer. I should have been more precise. I own a standard Ender 3D printer and have kept it somewhat up-to-date with various upgrades over the years. I had the Creality direct drive installed before and wanted to upgrade to the Sprite. The only problem I have now seems to be the CR-Touch. It used to sit next to the nozzle, like all standard probes seem to do. But on the Sprite extruder, it sits further at the front. So when I want it to level the bed, the CR-touch never touches the bed, because it remains over the edge. I'm wondering if I need to get crafty and mount the nozzle back there again (parallel with the nozzle), or if I can somehow 'tell the software' about the new probe position. Sorry if I did not properly explain my problem here, english is not my native language :/
Question, the nebula pad can also get printfiles via wifi or lan, rather than annoying usb stick or sd card swapping? Second question, is the Creality Sonic Pad similar to nebula, re wifi and/or ethernet?
Both are The same. Sonic handles 4 machines. Nebula 1. They are Klipper. Everything is done wirelessly. K1, K1 Max, Ender 3 V3, Ender 3 V3 KE, CR10-SE, come with it.
@@3DRundown yeah, we sell K1 and K1 max in our shops. Though they call their Klipper "Creality OS", in violation of the GNU license, which I found a bit strange. Thanks for your reply, I believe Nebula should be the way for me to upgrade since I can't do multiprint anyway (2 more printers, fron 2 different companies)
I have a problem where it seems to be stuck on the "Auto Z offset in progress" screen. The "nozzle heating" icon is not blinking, and no parts of the printer seem to be getting warm. Do you know what the issue might be? Or what I can check? I have tried multiple times reflashing the firmware to both the screen and the main board. Still no success.
Read some people who had similar issues when not using folder/not folder correctly. And some that need to rename files because of the filenames are too long.... Not tried this myself.
So far until the micro sd everything went okay, but now when trying to put the memory card for the BIN file, the printer screen is turning on in the blue background but the CREALITY logo is not showing at all, what can I do next?
NO idea man. Looks like its not finding the files. Just did mine. I couldnt get an adopter for the SD card to formart. I used phone and was scared... but worked. Just now am on the grid check with the printer board Big SD.
@@3DRundowntried with the 8gb microSD card with 4096 bytes, FAT32 for both firmware screen and firmware mothercard. Ive now passed the creality logo but the z offset calibration just wont start and will keep restarting over and over, at this point I have no idea what to do
Hello, I tried to update the firmware but it appears in different languages really strange. I also tried to use different sd cards (clean ones) and still doesn’t work, any help please?
Should be an English version to DL. If not, you should be able to navigate the firmware to the language select screen and switch it to English. Maybe can find a video that shows where the language option is, so can follow in whatever language your seeing
I'm so disappointed with the UI of this machine. It does so many things automatically, and you have NO chance to intervene. I can't believe the latest firmware update was in october 2023
I haven't found a change-log for it. But, keeping up with the latest version of Marlin is a good idea. Creality tends to fall behind, and it's good to see them at least keeping up somewhat
@@3DRundown yeah, it definitely it's behind, I just got a v3 yesterday. I have a v2 with Mriscoc firmware installed and it it's LIGHT YEARS better, than the stock firmware on the v3. Can't wait for developers to make the cool stuff for the v3!
So my problem is I have a Neo3 and I have a chromebook. I updated the software, and it says I have no files on my SD and so the company gave me another file and it still doesn't recognize the file. I unzipped a file from another file and put it on the SD but it still doesn't see the file.
Need a memory card, 32gb or less, formatted in Fat32. Make sure have the correct file, on the root directory. Rename the file to something else, before trying again
All you need, is to put the file on the card... then the card goes in the printers, so, can use whatever you like, as long as the file gets the the card.
After successfully installing the TJC and getting an "Update Successful" I'm still getting the frozen screen even after renaming the bin file to 123.bin
I have an ender 3 pro and just installed the direct sprite extuder. Im having trouble with my prints now. Any chance you could help me out? I would greatly appreciate it.
You went from Bowden to DD. Be sure you've got the correct Nozzle Size installed, and set in your Slicer (I assume 0.4). Retractions need to change. Sprite will be 0.8mm/45mms PID Tune, if your firmware allows Set your Esteps to 424.9. But, you may need to calibrate that manually to dial it in. I don't usually find that necessary
I changed the e step and retraction distance already. I can't remember if I changed the speed or not. Could it be the slicer or firmware on the printer?
I assume you are adjusting your speed based on what's best for each model. Have you tried working with your flow rate? Trying different infill? More walls? The usual suspects? Perhaps estep value is not working out? Flow rate is too low... Experiment with some small test prints.