Updated Firmware Website (MUST ENTER VEHICLE VIN FOR IT TO WORK): www.toyota.com/firmware-updates If you need to pick up a thumb drive: amzn.to/3alDREx *Amazon Affiliate Link* Thank you for watching my video! If you found this video helpful please give it a THUMBS UP 👍 and consider subscribing! THANK YOU! I appreciate all the support! SUBSCRIBE HERE ▶︎ ru-vid.com/show-UC8BzgKWkH0AGzCOORKK7Vwg
My question is that I've downloaded it for my Toyota Avalon 2014 . But , the installation package stuck at package 1 of 8 and now it's stuck in software mode . Some says it's iso file . So , I tried to use iso burner and then zip files but nothing seems to work and I don't know how to get out of update mode because my backup camera doesn't work anymore .
Nice! I’m glad it was helpful and you got the update! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!
Now in 2023, I just updated my 2015 toyota avalon hybrid media software. Thank you . I struggled for a few times reformatting the usb drive. Finally it worked!
This was SUPER helpful! I just upgraded my 2004 4Runner to a 2014, and didn't have the middle fancy console, obviously, and some of the bugs in the system were driving me nuts. Super helpful, thank you!
Did you see any issues with updating it to a much newer version? I am thinking about updating my 2018 to at least 2020 but i am not sure if it would even work or be compatible..
Thanks for this. I just put the software update on my flash drive and started reading the instructions. You cleared up some confusion I had with their instructions as written. I noticed you inserted the USB flash drive right after starting the car. The instructions have you start the car, go into the menu and slect Setup, software udpate, then insert the flash drive.
Thank you for watching, I’m glad it was helpful and you were able to update the system! Please consider giving the video a thumbs up if you haven’t already! Thank You!
Thank you so much for the video! I was having issues with my 2015 4runner's display intermittently freezing/rebooting, and when I went to download the update, the newest update claims to fix this issue. I was able to install the update following your video and hope to see the issue has been fixed in the next few days!
I was having the exact same issue and so far hasn’t happened since the update! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!
I’m glad you were able to fix the issue with the help of my video! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!
I really appreciate this video. I did everything you said, made sure my flash drive is formatted correctly, inserted the flash drive into my 2014 Rav4 and nothing happens. I did it again using a different flash drive and still nothing happened. Do you have any suggestions? I'd really appreciate your input.
I believe there is a limit to the size of the flash drive that the vehicle will recognize I believe it is 16 or 32GB. Let us know if this helps! Thank you for watching!
Thanks for sharing this,pretty straightforward but I can't seem to find "software update" option on my 3014 rav4 for some reason. I checked under the " system information " there isn't any also. Do you think this is normal ?
Hi - Have you heard of the 4Runners having an echo issue when making phone calls? I already unpaired and repaired my iPhone multiple Times. Also installed the latest iOS software and I am clueless. Toyota can’t seem to fix it. Might have to try and update the software on the head unit and see if it helps. Thanks for sharing!
I have a toyota camry 2014 and it is the non navigation version. If you know, can you please tell me what the "Setup" and "Car" buttons do? Scared to try them out 😂.
Hello, I have a 2016 corolla with a 100571 and I tried to update it, it recognized the update and I gave it the update, it took a long time from 8/12 and it never finished. After more than two hours, I found my radio turned off and it doesn't turn on at all.
I own a 2013 4Runner LIMITED with navigation, I didn't see any option on the toyota site for 2013... Do you think I can update still? Curious, what year is your 4Runner.
My 4Runner is a 2014 Limited. If you check the site with your VIN number it will be the most accurate in terms of telling you if there is an update available. Hopefully this helps, thank you for watching! Please consider giving the video a thumbs up if you haven't already! Thank you!
Update I had no luck with software update as the existing was current I got a new head unit and my 2014 4Runner still reboots randomly, any ideas would be greatly appreciated!!!
I have a 2015 Toyota Highlander and it didn't work for me. I followed your instructions from start to end. I called the dealership and they said the head unit is likely going bad, but he agreed to attempt to perform the necessary update for $300 plus tax!!! Not sure what to do.
Hey i just follow all the steps and everything went good until the last part where you it say park and turn off vehicle the start it back then it got froze where it says check sorrounding?? Can you help me?
Just saw this comment…I’m not sure that it will help that issue but it wouldn’t hurt to try, let us know if it fixes the issue if you decide to do it. Thank you for watching!
I formatted my usb drive and copied the download to it and followed the steps and it’s still not even reading my usb on the vehicle (2015 4runner ) Help !!:(
hy i just receive my new rav4 hybrid 2020. i live in israel and apparently the unit multimedia jbl dont show me or not opening the wifi. so i can not link my key sim or my mobile to the systeme. there is a solution that my unit can see all the wifi around it? yhanks for your respons.
Thank you for this. I paid $60 for Toyota to supposedly download this but didn’t fix my problem. It shows the update but it doesn’t show the date, so assume they didn’t completed it properly. If I do this and repair it myself, I will be asking for my money back. 🙁. Thank you!!
dixiechic60 I’m surprised they charged you for this most people I’ve heard from were getting it done free of charge. Hopefully this works for you! Thank you for watching!
@@5MinuteFixit Not yet, I cannot get access to the link. I don't think I ever registered my car on the Toyota website. Struggling trying to get a download.
I still haven't been able to fix the issue. I cannot log into Entune, it will not accept my VIN when I try to set up entune app. And when I try to download the software update from Toyota and download to a thumb drive, my car does recognize it on the thumb drive. I spent an hour with Toyota corporate yesterday, they couldn't help me either. Going back to dealership, corporate said my software is not the latest. I appreciate all your attempts at helping me!!!!
Are you using a Mac computer? If so the usb needs to be formatted in exFAT or FAT32 this can be done in the disk utility. Make sure there is nothing important on the usb before you format it because I believe it erases everything. Then redo the process. Thank you for watching! Hopefully this helps!
Greatings I have a Fortuner 2019 from South Africa, with the multimedia model ID as 17TDT1ZA-CA02 on version 1111. Would it be possible to update software so that my unit to support Android Auto and Apply Car Play? Thank you in advance.
cant seem to update to 1010 my current one is 1008 i entered the vin number. i probably need to wipe out the flash drive have it empty or try another flash driver probably because its usb 3 im gonna try again later and update for my corolla 2020 LE
Just did this update on my 2017 Tacoma and now screen freezes on the start up screen, thankfully the back up camera still works. Has any one had this issue?
Can you share what prompted you to update ? Did the radio malfunction ? My is blacking out then start up in 2 seconds and has done it several times just got this 2014 4 runner used
That is the exact issue I was having on my system...it would freeze up and then randomly reboot. If you end up doing the process let us know how it turned out and if you are using a Mac make sure the thumb drive is formatted in FAT32. Thank you for watching! Please consider giving the video a thumbs up if you haven’t already! Thank you!
@@5MinuteFixit just tried to update appears done already current 0101D8 is on my unit before I tried to install update yet my 4 runner keeps doing it and it caused an engine stall in traffic had to coast into gas station. Any ideas? Good info definitely subscribe
The engine stall shouldn’t be caused by the radio malfunctioning, maybe an electrical issue with the whole vehicle. My 4Runner has a recall for the fuel pump that could cause the engine to stall. You should look into any recalls for your 4Runner. Thank you again!
@@5MinuteFixit thank you , I did log in to Toyota with my VIN and history shows fuel pump recall and replacement,also the update performed because customer complained of radio issue , however problem still exists,wish I could have seen this before buying guess I see where car lot got this car from auction thanks for all your help again
This update may fix those issues...my issue was that the audio system would randomly freeze up or reboot. It fixed those issues for me. If you end up doing it let us know if it was helpful for that issue. Thank you for watching!
Does the USB drive have to be plugged in for the software update option to even appear in the settings? It doesn't appear for me. I'm using a 2013 Camry. There's only 3 options in general. Language, beep on/off, and Delete personal data.
@@5MinuteFixit The oldest year on the website for the Camry is 2014, and when I use my VIN number to select the 2013 Camry, it says there's no update available. Is there anything else I can do? Do you think it's ok to use the 2014 Camry update instead?
@@5MinuteFixit Yes, the computer looks like it's constantly crashing and restarting. When it does stay on, very few screens are accessible. The "car" screen that shows information about your trip works, the "audio" screen sometimes partially works, and the "apps" screen will attempt to show up but will crash the computer the instant the apps menu loads, sending it back into a loop of restarting constantly. I can always get to the startup screen via a physical button above the screen. When I go there, the "Bluetooth" and "Phone" options don't work when you tap on them, they just beep acknowledging you selected them, but they don't open.
@@Zytron I guess with the issues you stated it may be worth trying the '14 update although it may not let you. let us know if it works and how it turns out if you end up doing it! Thank you for watching and please consider giving the video a thumbs up if you haven't already! Thank you!
has anyone had any luck getting CarPlay on an older screen I have a 2014 Toyota Camry hybrid and I would love to update it to an OS that has CarPlay which it has Bluetooth so I don't see any reason CarPlay wouldn't work
Hi Sir I hope u r well I have Toyota Tundra made in Kentucky 2016 I have already install Navigation in LcD but my location Oman I can't access map of Oman so tell me what ii do to connect Navigation of oman... I only have installed GPS USA or Mexico but I need Oman App
Our Prado is the Lexus GX460 in the states but I’m not sure that update will work. I think your best bet would be to find the Toyota update website for your country and search there for your vehicle. Thank you for watching
In Toyota camry 2016, On selecting firmware update, software update button is enabled but the popup - "The new software is..." not showing up. Any suggestions pls?
I believe there is a setting to recalibrate the screen, this update may help to resolve some of the issues or at least get you to a better starting point. Thank you for watching and please consider giving the video a thumbs up if you haven't already, thank you!
This does not update the map....that is located on the micro as card that is inserted under the micro sd logo on the head unit. Thank you for watching!
Oh no, did you try it by the VIN number? Chances are you will probably get the same result but it might be worth a try! Hopefully this helps! Thank you for watching!
The issues that I had were Bluetooth connecting issues and also the whole unit would restart randomly and lose settings. This update fixed those issues. Thank you for watching, hopefully this helps!
My Toyota Avalon 2013 car after starting the Bluetooth system, GPS, radio are completely normal and work, they work even for a few hours when the car is on, but after stopping and turning off and starting again, they stop working and until the start They don't work the next day
I would put both on the usb and try to update with the most up to date first (if it gives you an option). Hopefully this works and thank you for watching!
This fixes the audio blur problem when putting it in bluetooth mode? that is, when I put a video on RU-vid when listening to the audio, it does not match the video. anyone know how to repair this?
The audio delay still happens when my phone is connected, this seems to only help with the random freezing and shutting down of the radio system. Thank you for watching!
I've always had this same issue as well and I can't find an update for my stereo system anywhere online. It's like all the files have disappeared and nobody can help to upload my specific vehicle stereo software at all. I have a 2014 Toyota Rav4 with the Entune system, no navigation or anything special. I've had to resort to using an app on my phone that let's you set the latency for bluetooth. Hopefully someone can help with this issue
Ah - manual says FAT32 format on the USB. I re-formatted as FAT32, put the .iso file on the USB and it worked w/ my 4Runner. It's a 2012 if that helps anyone...
Thanks for letting us know how you were able to get it to work, this will help others with the same issue. Thank you for watching and for the extra tip!
That’s interesting, I would suggest trying it in exFAT format. Let us known if that works so others that have this problem can be helped. Thank you for watching!
@@awolfe3605 Any luck on this? I have this issue and can't figure out what to do. Tried three separate USB sticks and multiple downloads. Still no luck.
Yes it doesn’t matter what year your car is much like a cell phone that gets updated after you buy it. Hopefully this helps, thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!
Finally got the download thank you did you ever encounter engine stall along the same time radio blank out ? I did do you think this will work with Bluetooth of an apple I phone 12?
@@kghomes8125962 my entune system was randomly freezing and rebooting and it fixed that issue for me! Hopefully it works for your issues and your iPhone. Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!
@@5MinuteFixityes! very frustrating i just bought the car and it does not work. I unloaded and updated the software but I don't notice any difference nothing that helps. i dont get it.
@@Endorphins27 the only thing I could suggest is maybe go through the update process again to see if something changes! Thank you for watching even though it didn’t help you.
@@5MinuteFixit yeah I’ve been threw it a few times now and unfortunately it still says it has trouble initializing Bluetooth. Annoying to but a new car and something as basic as Bluetooth doesn’t work. I know 2009 model cars with see less Bluetooth my god! Arrrggg so damn aggravating what a waist of time been a couple hours of reading and running around downloading crap like a jackass to no avail. Thanks for your help, good channel. Hope all is well.
This is the U.S. firmware site. I would try to search for the firmware site for your specific country then for your model. Let us know if you find anything so others in a similar situation can benefit! Thank you!