love this kit. its the only kit we fit now. but the hole on the RKP with the cut-outs arount it needs to be screwed down for the tamper for graded 2 systems. very good install nice and clean install from a fellow Pyronix installer good video
Hi there, I am trying to set one of these up at home and whenever my intruder input is triggered it doesn't trigger the alarm but instead looks for me to enter my code, after 30 seconds it then rings the alarm. Is there any way to get this alarm to trigger like you did when the hall sensor picked you up for a full set alarm? Thank you!
Hi thanks 🙏 to watch my video. Seniors no trigger till give change program. Every program is different. In your case I understand from your question when you go to front of sensor after armed alarm no trigger. It’s mean you net set input program. Go to engineer mode and keep press no see input and select zone which one you give program. For example I select zone 1 on main door contact I give mode (entry exit) when door open alarm gives time to off alarm default time 40sec. Zone2 I used always hall I set program commonly used Entry route (ER) give time when you used part setting B. In full set A zone don’t give time if you come from other side alarm trigger. Zone 3,4,5,6 I used intruder. Hope you understand I make lot of videos see playlists Euro-46 videos. Thanks and good luck!