How To Upgrade Your Speakers! (The Easy Way)

Подписаться 18 тыс.

Просмотров 18 тыс.

50% 1

Link to Speakers Used in Install: www.bestbuy.com/site/pioneer-...
Link to find Speakers: www.crutchfield.com/S-6VbW6ZC...
Speakers at first glance can seem a little daunting if you're not too familiar with digging into your car. But realistically, just breaking it down into steps its actually pretty straightforward. In this install there's no need to tap into wires or mess with a power supply. This route is one of the more simple ways to go to keep the factory pieces with a new speaker.
Link to Plastic Cover: parts.ford.com/shop/en/us/har...
parts.ford.com/shop/en/us/bod...
________________________________________________________________________________
► Artist Attribution
Music By: "KaizanBlu"
• Instagram - / kaizanblu
• SoundCloud - / kaizanblu
• Facebook - / kaizanblumusic
• TikTok - @kaizanblu vm.tiktok.com/aCYwfx/
• RU-vid - ru-vid.com/show-UCUtx...
Licence: Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)
• Music published/ licensed by: Chill Out Records @ goo.gl/fh3rEJ
► Artist Attribution
Music By: "After The Fall"
Track Name: "Pieces"
• SoundCloud - / afterthefallof...
• Instagram - / afterthefal...
• FaceBook - / afterthefall...
• DOWNLOAD @ www.chilloutrecordsmusic.com
Licence: Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)
- Full licence here: creativecommons.org/licenses/...
• Music released by: Chill Out Records @ www.chilloutrecordsmusic.com
► Music Credit: 'Low Frequency Music'
Track Name: 'Good Day'
Music By: Low Frequency Music @ / user-551516820
Official "Low Frequency Music" RU-vid Channel HERE - / lowfrequencym...
DOWNLOAD @ www.chilloutrecordsmusic.com/
License for commercial use: Creative Commons Attribution 3.0 Unported "Share Alike" (CC BY-SA 3.0) License.
Full License HERE - creativecommons.org/licenses/...
Music promoted by NCM goo.gl/fh3rEJ @
www.LoFi-HipHop.com

Авто/Мото

Опубликовано:

15 янв 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@joannleonard2694 Месяц назад

Thank you for this video- I was able to replace my front passenger door speaker with very little difficulty, and hardly any swearing. And I have no skill. You did a great job teaching me!

@CosmicAnime Год назад

I like the fact that you upgraded with normal speakers, sounds strange to say that, haha. But so many other people upgrade their parts of their vehicles with the most expensive, fancy, lights, blah blah blah. Its nice to see someone that has video with normal and affordable upgrades.

@brianhobbs3373 Год назад

Good video on door panel removal, Crutchfield is the way to go and they send you brackets and adapters to go from car speaker harness to back of speakers for free

@DitoCardona Год назад

They’re so helpful for sure!

@garforce2 Год назад

ford loves those 5.5mm bolts, its also the size of the adjuster on a final gen vic

@droppy2692 Год назад

Hey dito hope you doing well! Nice tuto as always ! No news form the modeo/ imported fusion I just have to wait the fusion come to USA to France with ship and other stuff before I can drive it ahah I wish you the best for the new year and to your belong hope 2023 will be great for you

@DitoCardona Год назад

That’s still exciting that it’s going on, thanks so much man! I hope this year is awesome for you!

@Mysteryyy_ Год назад

Thank you so much bro, I’ve been trying to find how to change them out, my speakers rattle a lot I have a 2016 Fusion SE.. this helped a ton! Are the speakers you bought good in bass and everything else? Or should I go for a more pricey one?

@casket_biscuit2281 Год назад

Oooooo new video 🖤🖤🖤

@MrJacker751 Год назад

Can you make a video recommending alternative radios for a 2014 Ford Fusion se hybrid

@davidstephens2341 5 месяцев назад

u have a video of how u took the housing off? i came across that problem, even bought brackets an that didnt work

@benmeyer2916 7 месяцев назад

I will say my fusion isn’t as clean as yours looks wise and literally (it’s filthy lmao) but I have two soundstream 12 inch subs 2500 watts a piece 5k amp in the trunk and the door speakers are absolutely shot, definitely have some serious foam rot so thank you for your informative video, I’ll check out crutchfield for sure

@pawlinski74 13 дней назад

Hey bro greetings ..nice job with the old housings ,,doing the same thing but one quw=estion is it important how you connect the wires to weld them to the old harness i mean plus or minus or that doesnt matter

@CatWhiskerClaws Год назад

I'm giving up my 2014 Fusion 🥺😭. It was a great ride at first but too many problems towards the end 😮‍💨

@masterpizza794 8 месяцев назад

Been working in getting those bolts out in the car door but my tools aren’t loosing the bolt at all both the smaller and big one will an impact driver drill get them out easier?? (note I twirled around with my 10mm and my 5.5mm for almost 2 hours was only able to get 2 small ones out)

@mountainmew1692 Год назад

I've started getting a rattle in one of my speakers at certain frequencies so this will be really helpful when I decide to address it. Should I just swap the one bad speaker or do you recommend upgrading all at the same time?

@DitoCardona Год назад

Most of the speakers for sale come with a set of two so I’d suggest doing two at a time! There is a nice pickup in audio quality so I’d just do em all like that 👍🏼

@d_theletter Год назад

What did you do to your door handles to make them black did you wrap them

@DoeRainn 11 месяцев назад

Did you end up upgrading the tweeters as well?

@mwf3live863 10 месяцев назад

What solder did you use

@katiehorton6811 3 месяца назад

Oof that's a beautiful fusion though haha do u still have it?

@so-roadkill 4 месяца назад

Arghh i was hopeing it would show me the posative and neg lol but diffrent to my uk 1993 escort haha

@psuzach23 Год назад

Hey Dito, not really to familiar with sodering the wires the speaker, any tops? I want to replace my speakers in my 2015 fusion with the same ones you got.

@DitoCardona Год назад

Sure! So main thing is just you want to make sure you’re making clear contact between the pieces. So aim to get it more centered and build up some around it so that it’s secure. Then from there you can wrap some electrical tape around it for extra security and then you should be good 👍🏼