how to use 5 In 1 Digital Heat Press Machine 

Why does it matter how “on point” the hat was? Or any of it for that matter. It’s a TUTORIAL sheesh! And he doesn’t look confused. He knows exactly what he’s doing and you obviously were confused because you came here to watch HOW TO WORK IT 🤦🏽‍♀️ I needed these exact directions!! Thank you sir!!

Awesome video ! Didn’t do no talking and I already got the point. And you didn’t go on about unnecessary stuff like everyone else. Best video❤

Just received this machine & I'm so glad I found this. Why not send instructions? Thanks for posting.

Thank you for this. I've had my heat press for a while now and never knew how to set up the attachments. It didn't come with instructions.

Bought the press but I’ve only used it for T-shirt’s. Now I’m ready for Mugs and hats! Which this was a better tutorial, but I got it. Thanks

This is great easy and straight to point, glad I found your awesome video. I knew there was no 4 screws to unscrew it just didn't sound right.

Thank you for this I had no instructions with my machine and was looking into returning it. I will use this video until i comfortable with the press.

Explaining how everything works would be great!

I think the reason people were so critical of the way the hat turned out is beacuse it looked like a struggle to get the design centered. It moved a bit and those plates are to hot to be reaching under them with your fingers. Other than that it was just a demo. That being said i would want to make it look like my product was easy to use and produced flawless results

It’s just a damn tutorial on how to use the machine. He’s showing yu how to change and adjust the components out. The hat ain’t have to be perfect. It was used as an example

This is exactly what I needed to see.

Excellent demo. Can't wait to use mine😁

Good video. This type of heat press is NOT good for Hats. I've had one for over 6 years and the hats don't sit properly. Impossible to get to sit flat for a good application. The cup attachment is only good for small cups. If you plan to do caps and cups regularly get the seperate machines for each, it will save you time and material losses

Thanks for sharing this I never would have figured out the plate press install.

I have so many questions, and the worse part is I don't know where to start.

Would be nice if u speak bc the music is not teaching us anything - get rid of the music it would help us all

So THAT"S how to attach the hat attachment lol. Thanks I needed this video.

Wow i love how this video doesnt teach you important key points on how to make or aquire a decal, very helpful 👍

Thank you, I just received mine and the instructions that come with it are limited.

Watched this at least, a dozen times! I own, this exact model!

This video was very helpful, Thanks

Other than the crooked print on the hat. Awesome video 👌

This is great visual of it..Easier to learn and use. Thanks for the video

Thanks for the vid.. I just won one of these. Im not crazy how you have to take everything apart to do a hat but hey, its free.

Thanks for teaching us how to make counterfeit Simpsons merch... lmao!

Supreme, 1 tiny box logo, your whole time savings

Two questions1. Were do you get the stickers..2 can this print a design directly from the computer

Have you heard of heat tape to hold items in place, so they don’t move out of alignment? Machine doesn’t look steady when pressing and conrol box wobbles, makes me wonder if it will hold up in use. I like the multiple attachments, but wonder about longevity for personal not heavy use?

Video was very helpful because I have been trying to figure out that hat press

My mother just got this and I'm trying to set this up

this is like some kind of a tutorial but the guy isn't sure of what he's doing as well. anyway. well done. very useful video. thanks

New here thanknyou so very much for sharing your informative info. You helped me alot. Thanks again

The multi colored vinyl sheet though? Where can the people find this. Haven't seen it in one application.

Thanks for the tutorial! Can you take the temperature box off to sublimate mugs so it's easier? The cord is so short! Do you need parchment paper?

I just got this same one but idk where to get custom transfers or I don’t know what dimensions to get for them

Is the temperature setting for hats and cups the same as shirts?

Just got mine today.

HOW DO I GET IT STARTED? I keep trying to figure it out

I have this type of machine, I only made 4 sublimations on t-shirts and it doesn't heat up anymore, what can I do, how to fix it?

Thank you for this tutorial.its a great hrl😊

What did you use for printing your design? And in multiple colors?

Thanks so much for the video! Jesus loves you, God Bless 🙏🏽❤

Perfect demonstration, thank you!

Hiiiii! What's transfer so you use for the shirts ?!

How did you get the design you’re using?

Where did you get the paper you are using? is this the self weeding sublimation paper?

can you plz tell me, which sublimation paper did you used?

Verry good demontranstration

Hi I’m just stuck on one thing, how to get the prints. I’ve bought the machine and a printer but no idea where to go from here any help would be greatly appreciated

Just got my machine having trouble getting it to swing / swivel any tips ?

Thanks, this was extremely helpful!!!! 🖤🖤🖤🖤🖤🙌🏾 sending good vibes your way for posting this 😊👳🏾‍♂️

What temperature should I use for each item?

Please tell me which transfer paper he has used. Plz plz plz.

Where did you get your decals from?

Nice graphics! But verbal instructions would compliment the video best.

Will the picture come off if I wash the shirt

Mine doesn't look like this and I can't figure out how to set temperature 😕 so aggravating. Mine has a red on/off button and above it, a small red button that has no writing around it. On the face from left to right is a - button, MODE, +, then a arrow pointing to the right with 2 lines ll so tell me how to set

I need a walk through setup not how to use. Having a hard time setting my heat settings. And what is the back red button for it doesn’t work

Thanks for this video but I need to know why when I plug in my mug attachment and turn my machine on, it starts flashing all these different numbers and gives me an error message?

I just bought one of these, I've had a Hix & a 16x20 clam shell before. I have this one set at 400 degrees F. I take a temp reading on the top platen & it's a constant 268*. Is there a way to increase the temp? My controls won't allow it to go higher than the 400* They said to watch this video. Okay, now what??? I'm having E Bay to step in. I may just go out & drop a grand & get a great one. I don't need all of the other stuff that came with it

Very interesting video. My question is How do you know how much second to give each..items?

Ok. I ordered the machine. Now where do I get the stickers, or whatever im going to press on the clothes or dishes?

What temperature&time should I use for each item????

It only works with transparent, glossy paper to transfer the image to the t-shirt.

Do u happen to have a video of which wires attach to which inside the black casing.. my fell and the wires tore was gna reconnect them

How do initially set the timer and temp?

Hi what is the best temperature for cap😊

May i make a suggestion, when you demo the hat press to use heat tape on the vinyl

Is the cup size standart?? Or can i also use it for different size bottles??

You F'D up that hat

Do they all use the same transfer paper that goes on shirts or is there a specific one u got to use for each?

does anyone know how to keep the platen tray from rolling right off the front ? Someone sold me a used one, looks brand new, but it just rolls right off the front. Any suggestions? thanks.

I have this same machine, but how do I get the sublimation papers to use? And is there a software you use to custom print your own designs?

I am having trouble setting the temperature. There aren’t any written directions!

Good video but I can’t help but notice the vinyl applied to the hat looked wrinkled.

what kind of printer do you use to print the photo before using the heat press machine ?

Merci beaucoup pour cette vidéo explicatice . S'il vous plait, comment s' appelle le papier transparent qui est sur l' image à imprimer .

Thank you so much. Very helpful

Michael, this is Wong.

Great

Thank you ,,, I make a mistake , bought 5.1 heat press . While printing mug first time on it , I turn on the mug press without inserting the mug . Thought I should heat it first like shirt heat press . My mug heat press gave a smoke and now it is not heating up . What can I do now ?

I’m here to find out what machine you use to print your design out before you press seem like nobody have that answer

I bought one like this but little smaller. The back of upper platen is hiked up. Where the 6 springs are, it is lower in the front, if I take the upper platen off, can I adjust the springs to make the upper platen level. How do they work?

What type of vinyl was that Bart Simpson design printed from and what printer was used?

WHAT KIND OF PAPER DO YOU USE?

Thanks alot . Just what I needed

my press machine came with the Teflon/silicon sheet tucked up around the heating plate, is it suppose to be there or is it fine in place?

im SO salty i read through all of that and No one knows what brand of transfer paper that the guy in the video is using! please if anyone finds out report it back to me lol we all need the help! thank you!

awesome! Im wondering if we can use this machine in 100% cotton hoodies

I have same machine and my back 3 springs are going down but the front 3 staying up and not compressing so I am not getting any pressur on the front of the press only at the back how can I fix this please

Great video thank you so much

Is there perchance a guide to adjusting the temperature? My machine came today with absolutely nothing in that regard.

I just bought an 8 in 1 of this press - the hat attachment sucks badly - and the timer isn't wanting to work after only a bit of use

Can you please tell me what type of paper you printed the image on?

Thanks Big Help

How to adjust the plates in order to fit an actual tshirt between plates? No instructions came with it

I have this heat press but it just keeps cutting off is it a defect or something I am not doing right with the control

Thank you! This video is very helpful!

Just wondering if you have a tutorial I can't locate on setting temps? My sister got a machine second hand for me and it didn't come with instructions.

What kind of vinyl was used ? Can someone add a link ?