HOW TO USE A CORNER TROWEL

Подписаться 624 тыс.

Просмотров 676 тыс.

50% 1

Is this a PROFFESSIONAL TOOL or just a GIMMICKY DIY TOOL? In this video I coat some corners to find out!
Tools I use often:
DISCLAIMER: As an Amazon Associate I make a small commission from purchases through these links. Thank you for the support!!!!
Drywall knives:
2" amzn.to/2LwX8ty
4" amzn.to/32OHlw3
6" amzn.to/2LwP1x5
10" amzn.to/2QbLbOp (This one will rust if you leave it wet but feels nice to use)
10" amzn.to/3056fcU (This one is stainless. Stiffer, more expensive but won't rust)
Mud Pan with Grip!! (This is the BOMB! You will thank me!)
amzn.to/31tQauH
Tin Snips GOOD QUALITY!! amzn.to/2LzlOBv
Drywall Tape Holder!! amzn.to/32Udhzd
Paint Mixer for mud!! amzn.to/303fX0q
Full size mixer!! amzn.to/2LYrMLe
Mixing Drill (just in case)!! amzn.to/2O2oQ2P
Hawk and Trowels
13 inch hawk:
amzn.to/2ZWZXw2
13 inch trowels:
amzn.to/30aJPTB
amzn.to/2ZWH39d
amzn.to/2ZSY5Fj
12 inch trowels:
amzn.to/2Q5fGW4
amzn.to/2ZYKXxu
14 inch trowels:
amzn.to/34JeydR
amzn.to/34CdmsJ
Auto tools
If you don't want to think, here is the whole kit (Columbia is great quality too!) amzn.to/2UwPUae
Mud tubes and applicator:
amzn.to/2Xt65XR (different but works great, I have this one too)
amzn.to/2DBs1sz
amzn.to/2Vdy8x7
Flushers
amzn.to/2Dqa0x8
amzn.to/2GyDBGy
amzn.to/2Ix1Reo
Handle adjustable
amzn.to/2XuGP3x
amzn.to/2Xy5ILU
or fixed handle amzn.to/2DrNt2O
Corner roller (head only, you may need another handle)
amzn.to/2XpuJZo (cheaper)
amzn.to/2XpuNZ8 (better quality)

Опубликовано:

16 янв 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 608

@tacsystems5621 5 лет назад

I’m bad at mudding but that made me a good sander.

@kylewilliams7386 4 года назад

I was bad too but after 3 or 4 jobs. I've gotten the hang of it. Keep trying.

@whomee8907 3 года назад

That’s hilarious

@alinmuresan8374 3 года назад

😂😂

@cward1701 3 года назад

I tell people, "I may not be fast, but I'm not good either!" 😁

@DeLuini985 3 года назад

🤣🤣🤣😂

@GarwoodNick 5 лет назад

Never realized what we were missing on RU-vid until you started making these drywall videos

@rollyfoley123 4 года назад

Truth lol

@rbrown2925 3 года назад

I have a recently renovated Ottawa house that was drywalled by a supposedly decent company with guys that had decades of experience. Just about every inside corner was undercut on one side or the other. Every corner that I've touched up afterwards with a corner trowel looks great. Same experience with my previous house, too.

@MrCpolzin 4 года назад

I'm renovating old houses and you are teaching me gold tricks. Thank you so much mate. Great videos.

@brandonhorwath6351 4 года назад

I just installed my first drywall job. I really liked using the corner trowel for setting and wetting/skimming tape quickly on long corners. I'm going to try it on my second coat tomorrow.

@Robsay01 4 года назад

I just did work with an “outside corner” trowel filling in a new receptionist opening at an office. I applied a little mud to both sides and then made a pass. Looked pretty good. Ran another pass once dry and looked great. Gotta fill in middle last. They do take a while with mud needing to dry.

@amuse311 Год назад

I just did my first drywall repair in my garage and now realize how bad I did! Thank you for these videos, you make it look so easy, but it sure makes me realize how much more practice I need to do!

@malcolmthompson9848 3 года назад

I've used a corner trowel for 40+ years. I think my results are good. Heard about the one-side-at-a time method but thought it needless extra taping day. My work was mostly baths and basement so all knife work. Agree with you that this tool is tricky to get right. Redoing the basement in my new home and I'll give your way a try. Thanks.

@razmoe2000 5 лет назад

My first few years I used the traditional 1 side at a time method. For the last 20 years I use a corner trowel. The cheap red plastic handle ones are better than the marshal ones.

@Hagop64 2 года назад

I'm doing one wall right now and have been watching a bunch of your videos. I did some prefill yesterday evening and, in anticipation of needing it tomorrow, literally just bought a corner trowel a few hours ago. Having it sitting in the bag with the receipt. That may end up back at the store now.

@ericjohnson6100 5 лет назад

Your videos are some of the best on youtube, very helpful. Thank you for taking the time to make these

@noehctuccmliw 3 года назад

I was just looking at one I'd bought 20yrs ago sitting in my drywall bin as I am refinishing our bathroom today. I recall thinking it was soooo necessary back then. Today I can't recall the last time I used it for corners. Out of curiosity I checked to see your take on this tool. You made me feel a bit advanced 😉

@prairiedog9524 4 года назад

I used the corner trowel for a few years but I now do one side at a time because my corners turn out sharper with less mud buildup, they simply look better. I think I may get some good use out of my old corner trowel as a plank shim, thanks for the idea.

@susanandrews2294 4 года назад

I'm a DIYer and recently took down a lot of popcorn ceiling in my house. Sure learned a lot about skim coating and sanding lol. However as I now have somewhat jaggedy edges at the join of wall and ceiling, I want to be able to fill in those areas. Contractor friend with 25+ yrs experience has suggested a corner trowel so I plan to get a small one and have at it. Having watched your video I think I'll be able to do a passable job. Thanks for the instructional vid!

@turbocon86 2 года назад

I only use the corner trowel to apply my first coat of mud when bedding tape. I find it is easier to get good mud coverage with it, and it's quicker than alternating sides with a 4" knife. After I apply tape to the mud, I bed and dress it with the 4".

@redpillino4022 Год назад

I love my corner trowels. Mesh tape in the angle, coat and fill using a 2.5" corner trowel and hot mud. Then I put on the 2nd coat using a 4" corner trowel and topping light box mud. And always feathering the edges. Much faster than one side at a time

@russdee333 2 месяца назад

Damn, I do the exact same thing

@NearbyCactus 5 лет назад

I'm a newbie at this stuff, but I used one when I did the bathroom a couple of years ago, and my experience matched yours. A source of frustration in my hands!

@christopherbanks6578 5 лет назад

Tim Elley get it wet and it glides like butter

@bearspiritjpz 4 года назад

After a week of being totally green and struggling corners I went out and bought one and then saw this video. As someone who isnt a professional I think itll work out nicely for me

@outlawzescortz 4 года назад

I love watching your videos, they sure have helped me a lot. I always get a good laugh out of the way you say things. Keep up the good work and the videos!

@Ring49 5 лет назад

Wish I'd seen this video and your other one about coating one side first before I bought the corner trowel. Really frustrating to use, that's for sure. Thanks for all your videos, I've learned so much from them all!

@dmutant2635 3 года назад

I've used OPS a few times as well. I found I had better control and a better feel for the mud if my index finger was as forward as I could get it, applying pressure to the blade. That said it spends more time on the shelf next to my outside-corner plank shim than on a job site. Quality video! Thanks.

@johnczeiszperger1994 5 лет назад

I keep a corner trowel in my bag and use it for only one thing. It beds tape beautifully ,with some practice of course.

@drewt6235 4 года назад

John Czeiszperger I was going to say the exact same thing. I have never used or even thought about using a corner trowel beyond embedding tape. But I figured someone had to have already said it. Couldn’t agree more my man!

@marcellemay7721 4 года назад

Ditto. That's all I use it for, bedding the tape and applying a top coat to the corner all on the first coat. It makes a great inside corner to apply successive coats, and requires less coats to finish that inside corner

@MegaDavyk 3 года назад

I use a 50mm corner tool you bed tape and 100mm corner tool to top coat and never have any problems even on 3 way corners.

@garychandler4296 3 года назад

@@marcellemay7721 Agreed. Been using them for years. The thing I can't seem to work out is the OUTSIDE corner tool; faster using a 10" knife.

@marcellemay7721 3 года назад

@@garychandler4296 I don't how or why you would even use an outside tool unless you were forming a plaster corner with no bead under it. Why would any one do that?.. except for maybe around an arch way or something.

@trashes_to_treasures 5 лет назад

I saw this thing today in the diy store. I just could not imagine how this should work decently (for me). Thanks for the proof 😉

@trollop4866 3 года назад

I always liked the tool, I started with one in the toolkit though. You can bend it pretty well and get it to your liking, I have one bent inward more and outward

@oshkoshbjosh 3 года назад

Thank you for the insight on these corner trowels. I too have found that a 4 inch knife was much better and started to wonder if I just was bad at using the corner trowel.

@leohiggins7737 4 года назад

Thank you , I never had any good job from the corner trowel. I thought it was me.these videos age great, I have A lot of experience doing this but I always pick up some helpful tips.

@Animalwon 4 года назад

VC - I enjoy watching your videos because you explain things well and speak so eloquently. I have tried to learn from pro's working on other jobs, who knew what they were doing but weren't very good at explaining things to a newbie. I learned to use the corner tool thru trial and error. I got great results after applying the mud on one side at a time, then finishing with the corner "tool", feathering any 'outside' ridges with a 4 inch blade. I an avid do-it-yourself'r and finished an entire 2nd floor, including drywalling and taping, by myself. I never applied more mud than just into the corner. I learned along the way that too much mud meant more sanding, so I never got those hairline cracks because i layered the mud real thin before using corner tool and just applied a second coat the same way. YES, it was more work than your way but I was not in a hurry. I was patient to learn the right technique because I would be staring at any mistakes I made, for years to come! (And i don't like to see mistakes!)

@Bills96TA 5 лет назад

I used one yesterday thinking it might be easier than I remembered, it wasn't horrible but getting consistent results it tough for me. I do find that you can't try to stretch way out as its hard to keep the pressure consistent and angle correct.

@madboomr9048 Год назад

Today was my first taping and mudding job as a new painting services company. I was instructed by the handyman on site to do both inside corners at the same time. I proceeded with the closet first and then stopped halfway through. ONE SIDE AT A TIME ONLY!!

@jakobbreazier115 5 лет назад

I’m a maintenance technician and I like the inside and a Outside corner trowels outside is very useful because people really ding corners up

@jessespencer9810 4 года назад

I like my corner trowels...smaller one for mudding and taping, bigger to finish. Touch up with broad knife. I use a dustless vac sander with mesh screen...excellent results. I also haven't used paper tape in decades...once embedded, the meshes are far stronger. Loved your videos...a sense of humor and work ethics are nice to see.

@natechamp4692 Год назад

the mesh is better in general for application its so nice to apply all your tape to a room instead of jumping back and forth between mud tape over and over again

@handymaninside 4 года назад

I love the corner trowel!

@AY-cj9kp 2 года назад

I have used this corner tool to shape the bead of compound before applying the tape and then squish tape into the corner. It gives the most uniform results. Finishing and initial compound application is always with 4” knife

@rjw7032 Год назад

One good use of a corner trowel is using hot mud where you need to use green mesh for mold resistance. You can really push the hot mud into the corner gaps. Hot mud doesn't shrink much so no cracks. Then finish up with a 6" knife one side at a time with regular compound. Your videos are FANTASTIC!!!

@paulmaxwell8851 4 года назад

You know, I think that Vancouver Carpenter's drywalling videos are the best RU-vid has on offer. First rate. My wife and I are looking forward to our next job!

@bailey2624 5 лет назад

It's oddly relaxing to watch you mud walls. I also enjoy many tricks of the trade

@dergrunepunkt 5 лет назад

That tool was magical for me, I'm a total noob, I'm working on my own house, not doing professionally, and it helped me to get really great corners that otherwise I can't pull off, also allowed me to spent much less time on them.

@marvinmullet6362 3 года назад

Same here, I just do my own projects and that corner trowel sure made my life a lot easier and they are plenty, plenty good enough for me!

@ront9395 3 года назад

@@marvinmullet6362 Thanks. I'm doing a bath surround with mold resistant Fibatape, so I'm going to try the inside corner tool. All the videos I can find show paper tape.

@carletonhoffman 3 года назад

@@marvinmullet6362 thanks, i'm trying to decide whether i should buy one of these. i know i'm going to botch up the job, i'm just not sure which tool to do it with.

@JTP1967 2 года назад

@@carletonhoffman LMAO!!!!!!!!!!

@ronaldbrown5796 3 года назад

that v-tool actually has been working ok for me. I set it down for a decade. for some reason, i got the things to work well. I will continue to use it.

@TheWopper78 3 года назад

You have tremendous skill with your arms and wrist joints dude. I’ve taped and finished countless projects and I’m tellin you guys, his dexterity is amazing. That EFFORT. And determination. Well done bud.

@thegodemperorofmankind7yea704 3 года назад

Yeh those wrists would have some rock solid ligaments

@neocollective 4 года назад

That tool might be helpful in getting corner lines more straight in old crooked houses

@gordonkennethkoves7831 Год назад

As a more experienced DIYer I learned, through trial and error, to use the corner trowel to imbed the tape but that is all. Then do the sides one side at a time. That way I do not tear the paper when trying to get it into the corner. But I now realize I have not been thinning the mud enough. So I needed the corner trowel to force the tape into the corner.

@madman432000 4 года назад

I use them, just did my kitchen drywall and got best corners with that. I kept messing up the inside with the knife so I would coat it, apply tape and smooth it with the corner tool. I held it at a shallower angle than you did and went a little slower. Worked OK for me as a DIY guy.

@kevinmcneilly8989 5 лет назад

When I was taught to do corners it was with a corner trowel and I've used one ever since (16 years). I feel my results are really good (compared to other drywall finishing jobs I've seen which are mostly production crap). But now I'm seeing the potential benefits of "one side at a time" and I'm looking forward to giving it a go on my next job (or house project first). It looks like it can get a sharper and cleaner corner. I was put off trying this method a few years back when I trimmed a house that was finished that way but in hindsight it was their sloppy and inattentive sanding abilities that left horrible three way corners and other terrible joints. I have learned tons with your videos to massively improve what I thought I knew about drywall finishing. Keep up the amazing work

@vancouvercarpenter 5 лет назад

It did a half decent job. But I had to touch it up and it was more sanding. Also considerably slower. I don't doubt that you could get pretty good with it with more practice.

@davefabris9167 5 лет назад

@@vancouvercarpenterafter taping and flushing corners do all your 3ways first with 6 in. knife...let it set...then do straights with 4 in. + corner tool...i do it in 4 steps...apply mud both sides with 4, wipe with corner tool, wipe edges tight with 4, wipe and finish with corner tool-dont touch again, feathered edges will sand off. Should have about 5 in. wide line on both sides. Get better/ faster with exp...but leaves a nice corner filling in irregularities.

@Rowgue51 3 года назад

I think the fact that you're exceptionally skilled and experienced at mudding is skewing your view of how useful a corner trowel might be to a rank amateur. It's faster and easier for you because you've done tens of thousands of corners and you're used to the tool you always use to do it. The typical DIYer has little to no experience mudding at all, let alone doing trickier bits of mudding like corners, butt joints, etc. They have no comfort level with any tool for any particular application because they just haven't done it enough to establish it. For someone in that situation I can see a corner trowel being useful if they insist on trying to do it themselves. I'd have a lot more confidence that someone with no mudding experience could achieve at least a reasonable result with a corner trowel than a regular knife.

@alanmillar2905 2 года назад

Amateur DIY'er here. I just tried out an inside corner trowel for the first time, and I have to agree with Vancouver Carpenter. It is fussy and definitely did not save me any time or effort. I've done several drywall projects, and have always done the inside corners with a 4" knife, and figured out the hard way that I just had to do one side at a time. In my current project, I figured I'd try out an inside corner trowel, hoping it would speed up the project and save me some time. I found it very difficult to get an even application down the middle of the corner. Very easy to have it too thick on one wall and too thin on the other in various spots, alternating between both sides. And in quite a few places, it left too much in the corner, and they dried and cracked. That required more sanding, which left dust in the cracks, which came back out and left blobs and streaks on my next coat. If someone else has good luck with the inside trowel, I hope they can post a video for us amateurs telling us how to avoid these same problems.

@Rowgue51 2 года назад

@@alanmillar2905 Again you have done enough of it to have already established a comfort level doing it another way. That is not even remotely relatable to a rank amateur with no mudding experience whatsoever.

@kyleaguiar3413 2 года назад

I mean to be fair he said you can get an acceptable result, just not professional. Seems like this is more of a response video of him explaining why he never uses it. And I also agree, when it comes to drywall I don't have much experience, but I remember the second project I did I bought a corner trowel and i could t get a tight corner without essentially wiping all the mud off. Ended up taking my time and pulling from the corner out and it looked better than using a corner trowel. (I never watched any videos on mudding and never realized how easy it is to just do one side at a time lol)

@Rowgue51 2 года назад

@@kyleaguiar3413 Most people have difficulty even getting an acceptable result on the ideal straight joint between two sheets. Getting an acceptable result on a corner joint would be a monumental achievement for them.

@kyleaguiar3413 2 года назад

@@Rowgue51 oh I totally agree, I'm just saying I don't think the video is saying "don't use them, they suck" it's him responding to people asking in previous videos why he doesn't use them. And what I said about myself is because I'm the type of person where if im not good at something I'll be disappointed till I'm decent at it. The finish I got using a corner trowel probably would have looked perfectly normal to anyone else that'd ever see it (unless it was a pro drywaller) but I'm a weirdo and I'd look at it every time I walked by and hate myself for it and contemplate sanding it all out and getting it perfect lol

@gilbertoestrada135 2 года назад

Agreed, your videos are very informative. I am a new dry wall DIY(er) and I laughed at your yeah thats not bad 😄 comment to an average person. But I keep learning through your videos and I appreciate you.

@FisherCatProductions 3 года назад

I learned on a corner trowel, and don't need to use a knife with it. I keep my mud laying on my hawk like a fat pancake, and plow the trowel into it picking up what I need on both sides. Smear in out, usually half going one way, the other half going the other direction. Make several passes in both directions to smooth and level. Clean the blades on my hawk, then cut away excess mud from the far edges of the joint using the front of the tool. Clean the blades on the hawk. Make a feathering pass on each side of the joint with the tool fairly flat, putting pressure on the outside edge of the joint with very little pressure in the corner. Easy-peasy.

@dominicm2175 2 года назад

I agree he seems biased. How about a video with a zero experienced ‘taper’ showing them using both methods ( corner tool vs knife) and look at the results after just one application.

@stroys7061 5 лет назад

I have a corner trowel and struggled with it. It wasn’t until I learned from your video or others that the best way is to do one side at a time, after pre-filling, and use the proper mud.

@RichParkerflys 5 лет назад

I totally agree with your analysis much easier with 4, 5, or even six inch blade one side at a time... I too had one of those tools at one time sold it at my garage sale!

@1ghosthorse Год назад

Another great video. Thank you.any times I've almost purchased one of these thinking it would make me more efficient. Now I'm glad I never have.

@lourdesespinal5838 3 года назад

you've saved me thousands of dollars on my DIY projects - many thanks !

@gabrieljohnson901 3 года назад

ROFL 🤣 😂 had me knee slappin from the start with the "oh you mean plank shim " !!!!

@lsellclumanetsolarenergyll5071 5 лет назад

Corner Trowel also can be very well used when you put your tape down to place your tape into the mud. What I use is a Mud caulk gun to push a very big sausage into the corner, apply my bend tape and than run just once with the corner trowel over it forcing it to mash and spread evenly enough to both sides of the tape. The key is I use a sausage dispenser to push the mud into the corner joint first and after it as well to cover evenly the tape with mud. Give it a try and you will see it may speed things up for you. Still a banjo is way faster but a banjo is also an investment.

@Kenny-dd1fk 2 года назад

You are awesome and I love the humor… I learn a lot from your Vids

@LayneCocaine 3 года назад

If you get the angle right on them it's great, my dad said for years it was a schmuck tool until his cousin showed him how to use it properly and he showed me and yeah it really does save a lot of time but only if it's used like within certain accuracy

@budsatawny 2 года назад

We used those to do concrete curbing with a gutter built in, they also work well with concrete steps.

@777borisa 5 лет назад

This house is somewhere in the Canadian wildness maybe! I saw the forest out of the window. Beutuful place for living.

@scottfranco1962 2 года назад

I used a corner trowel on my back room. It went on pretty smooth, but it has hairline cracks now. Thanks for explaining why. I think one reason I went to the corner trowel was that with the knife corners I sometimes cut into the tape.

@Do_We_Exist 5 лет назад

I love these videos! Thank you.

@dominicm2175 2 года назад

08:43 “ one coat every time” ( using a 4” knife) …..wow that’s amazing ! I’ve been in the trades for 30 years and have never seen an inside corner taped by hand in one coat

@shlomokatz 2 года назад

Indeed, 4" ...1 coat 👍

@TheWopper78 3 года назад

Fantastic finisher. Great work Canada.

@billdozer3674 3 года назад

I really like watching your videos it makes me realize how bad I really am at mud and drywall 👍👍

@spelunkerd 5 лет назад

Ha ha ha, I always wondered about my corner trowel. I bought one 25 years ago, used it a couple of times, and had to sand way more after I was done! I assumed I wasn't doing it right. Single blade, one side at a time, is easier, as you say!

@philo5096 5 лет назад

Dude u r the best, fun to watch. Thanx.

@kds471 4 года назад

They are really good for scooping dry mix from a bucket

@calvinleonard3667 4 года назад

Could use on small jobs where the difference is running a light sand and skim. But honestly quickset and one side at a time works better. I always second coat inside corners with topping when I use quickset. I've found its a quick way for a nice finish

@emmareadagoodbook9643 3 года назад

I'm starting out with this plastering stuff. I like the single side tool. It is easier for me to use. Especially since our house is old.

@joshuagriffin5144 4 года назад

Ass a professional taper I can do both methods and often do. I can tell you if you have no experience a corner trowel will be much easier with much better results. Love your videos Ben keep it up!

@rolandoramirez27 4 года назад

This guy is good I would hire him in a heartbeat in my crew I started taping since I was 17 I'm 35 now just by looking at this guy I know he's a good taper

@timcaldwelljr6088 4 года назад

Do u run taping tools? Boxes, Bazookas etc....? Is it just a US thing or something??

@clemww 2 года назад

Ben, As a DIY guy, I can only say that I really appreciate your work and advice. I was joking with my wife today that I tried to get you to come take over my job but you said that you just didn't have time to catch a flight to New Mexico. Thank you for your videos.

@HeatherHolm 3 года назад

I inherited a corner trowel from my grandfather. He was born in 1901 and died in 1988, so maybe he did use it for plaster, but it's pretty shiny so maybe he didn't use it at all. I'm a novice at drywall but you inspire me to get better at it. I tried it on bedding tape and it was helpful, but I don't think I'd use it for finishing.

@tonyc7352 2 года назад

Yes, good for bedding. I Like Ben but it is not giving the whole story to just skip this big point which is how most people us it.

@wyattbatten1377 Год назад

It's for finishing plaster walls. I inherited one from my father too.

@816EDoggKCMO Год назад

so i wanted to try the inside corner tool as well i have had decent luck but mainly because of many trial and errors. its all around way more work and best way ive found to use it where it produces a nice finish is you apply more mud than normal, and use ALOT of pressure to thin the corner back out but honestly its definitely kids sandbox shovel now. lol

@scottcarruthers9204 5 лет назад

Love to see that I am not the only taper in Canada that walks a pail instead of stilts

@danob2904 3 года назад

easier without the lid on it... SC, USA

@ambreenmehmood5612 Год назад

I use this tool and for me it's good because I'm not professional and it helps me making corner

@georgespangler1517 5 лет назад

I don't do a lot of drywall, but I've gotten pretty good with a corner trowel,,,it actually saves me a step now,,,the trick is in the feather,,,and I've found a 5 inch knife works best because it flexes more...

@mansardmanor3869 5 лет назад

Use a blue steel knife, very bendable. You will enjoy using it 😉.

@user-jz3bb9xk4w 5 лет назад

Thanks Ben that I saw your video before buying this tool

@gofa4201 4 года назад

I only use my corner trowel for the corner, I still use my 4" to feather the edges and squaring up 3 way corners.

@KCWilliam 3 года назад

I'm left handed AND I like that tool. I apply the mud with the same tool so I don't need another blade in my hand. I've laid tape with it and use it on a finish coat. Though you're right it's obviously not suitable for every situation. I find it's only issue, from time to time, is the construction underneath it.

@joewellindowd5664 5 лет назад

Of course they work. And they are spectacular.

@steelwoodrock8888 5 лет назад

Joe Wellin Dowd great reference!

@Samakahzi 4 года назад

I square set perfectly with these helps if you dip it in water while top coating aswel if you need to.

@psalm23sheepdog 5 лет назад

I have success with a corner trowel by doing the following. 1) load mud directly onto the corner trowel. 2) run the corner with the trowel spreading your mud. 3) next, run the corner again, only putting good pressure on one side while the other side lightly skims the mud. the pressure feathers the edge. I found it difficult to try and achieve good results while applying pressure to both sides at the same time. 4) finally, repeat this on the other side that was lightly skimmed.

@johnhamilton2680 4 года назад

Great stuff. Thanks for sharing.

@markanthony3275 5 лет назад

I get fairly consistent results with a corner trowel because I don't put too much mud in the corner to start with... so the trowel always bridges the entire swath of mud. This means I really don't have to taper in edges because they always end up tapered with pressure from the trowel. If I need to run the mud out wider then I wait for the first coat to dry...and then use a 6 inch knife. I admit I am certainly not a professional. I tried the knife method and always found I got an inconsistent corner that had to be chiselled out or built up in spots. Perhaps my technique is pretty crappy...but I am a retired body repair man used to putting body filler on straight. Our motto used to be "The bodywork is only as straight as you are" LOL.

@kent7525 5 лет назад

Lol

@MrPDTaylor 5 лет назад

OMG!!! It's that guy from all those skateboard videos!!!! I love this guy!!! DO A KICKFLIP!!!!

@kevinmatthiesen8961 5 лет назад

I have just finished a bathroom and kitchen using the wing trowel hears what I found out, first check the angle of the wings, should be more than 90 deg to leave some in the bottom of the joint. Second place your index finger on the bottom of the V to help balance each wing. Third keep a low angle to not scrape to much out of the joint. Then level and feather top and bottom. Also I apply compound 6 to 8 inches on either side of the joint.

@James_Hough 3 года назад

I bought one os these. Used it once...in a closet. Never used it again. I am, however, now a fan of paper faced metal inside corner beads. I have 25 (drywall) inside corners in my basement remodel and they are well worth the $50 for me.

@uncannyavenger9998 2 года назад

You should see me on that corner tool. It definitely took abit of time to get good at it but once you are it really is beneficial. Only need to go over it once and only feather edges once at the end and when I go over it I put my hawk down somewhere or between my legs if I dont need to walk and use my other hand to apply the right pressure to get a more smoothly even finish, helps to control the angle and amount being applied I the corner.

@db3837 4 года назад

I had a boss say to me once, don't let perfect get in the way of "good enough". :)

@neocollective 4 года назад

Good enough for a contractor is poor quality for the client

@MegaDavyk 3 года назад

@@neocollective The trouble is, the client does not want to pay for perfect they want to pay for good enough but the want perfect and if you price for perfect you will not get the job.

@odysseus1220 3 года назад

@@MegaDavyk and they will never understand this unless they’ve been on the other side

@LetsGoFlyers2011 3 года назад

@@MegaDavyk Judge Milian's father is a general contractor and when she has cases involving contractors she usually says to the plaintiffs something along the lines of "You get fast, cheap, or good... pick two"

@MegaDavyk 3 года назад

@Anifco67 People do not understand if you are running a buisness you have a lot of hidden overheads to cover and you have to charge enough to cover those. Someone running a buisness can easily be putting in 80 hrs a week, not all of than on the job site of course but still entitled to be paid for that. If you want a high quality job Tell the contractor thats what you want and you will be happy to pay for that.

@codeyholst5337 3 года назад

I've been using the corner trowel for years if u can get good at using it its much faster and easier and looks really good

@cpmiller1965 3 года назад

It’s a time and practice thing. I use it to speed up projects,and not go over a second time for other half. I don’t to enough to justify bazooka set up.

@620JK 4 года назад

I’ve been bin watching your videos for the better part of a week now. I built a 4 foot wall extension and it’s been absolute misery! You have no idea how many hours and curse words went into this damn project. Blending the new wall into the existing has been a nightmare. You my friend have skills and I tip my hat to you because your trade is not easy

@sheathes 5 лет назад

Mash It! Hahaha. Gotta laugh because now i catch myself saying that when I am pushing out the bubbles.

@ADVRider78 Год назад

I like what you did there with the pot lights

@chrissimon8403 5 лет назад

Best tool for a non pro !! Do the corners tomorrow.

@randiruge1265 5 лет назад

Very green and it helps me.

@silverstone9122 3 года назад

You the best my friend Thanks

@grimoutlaw 5 лет назад

They are great and they have tiny ones round and outside corners do you use stilts? I was skeptical to try them for the first 2 years but finally got on them and they are a great time saver

@timmcdermott609 4 года назад

Very helpful to us beginners

@blam9360 4 года назад

I used a corner trowel yesterday and today and had to figure out on my own to press it down really hard.

@CATiNBRALSTARS 5 лет назад

You make it look so easy

@antoniovazquez3560 Год назад

Thank you professor I subscribed to your channel.

@dave0brien247 4 года назад

Like your videos mate , from new zealand ... i use a corner trowel , you can push on the outside of the tool as you pull the corner , that will feather it off as you go , that makes it way faster . And with a bit of experience on it you can get a perfect corner every time , way faster than a 4 inch , great to see different ways of doing the job tho 👊✌