How to Use a Portable Manual Tire Changer and Review

Подписаться 5 тыс.

Просмотров 152 тыс.

50% 1

Portable Tire Changer: amzn.to/3udOdpM
If you do not have access to a harbor freight use link above.
Tire Mounting Lube: amzn.to/3XgUoCE
3/8" x 1-5/8" Steel Drop-In Anchor: amzn.to/3rZPKcn
3/8" -16 x 2" Stainless Steel Hex Bolt: amzn.to/3k2k8QH
Camera Used: amzn.to/2NusMv0
Tripod: amzn.to/3a0oF1u
GoPro Quick Release Mount: amzn.to/3t5U0IV
Using the Harbor Freight Pittsburgh Manual Tire Changer for the First Time.
Is it worth the $31? Watch the video and see. To make removal and install much easier, I recommend using a quality Tire Mounting Lubricant such as this: BeadBuster amzn.to/3XInf2U . This will greatly improve your experience!
Please don't forget to Subscribe and hit that Like button!
As an Amazon Associate I earn from qualifying purchases.
#tirechanger #manualtirechanger

Хобби

Опубликовано:

4 июн 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 116

@DeanoOutDoors 3 года назад

To learn how to install this manual tire changer, watch here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-27Lh-3vNNoM.html

@chipjohnson23 Год назад

Out of all the videos you are the only one that showed how to exactly use the goofy end of the bar I'm pretty sharp but I couldn't figure it out excellent job

@DeanoOutDoors Год назад

Thanks! That "goofy end" works great if used correctly.

@restfulplace3273 2 месяца назад

One of the better demos Next level is adding plastic to protect aluminium rims

@williamdejeffrio9701 5 месяцев назад

I've seen countless explanations of how to use this machine (even though I have one and know how to use it, I am still entertained by seeing others do it), but yours was the clearest, most informative and you actually used the machine correctly (many do not). Excellent video!

@DeanoOutDoors 5 месяцев назад

Thank you, I appreciate your comment.

@kevinthornbury4905 Месяц назад

Just bought the same manual tyre machine here in Perth western Australia.🇦🇺 This was a perfect demonstration on how to use the SCA manual tyre changer

@DeanoOutDoors Месяц назад

Awesome! It’s a great handy tool. I’ve recently added an adaptor to this changer that makes life even easier when changing tires. I have a vid on it if you’re interested. Thanks!

@LatysGarage 2 дня назад

I've watched a few videos how to use these and your video is the best .

@stanleywong1849 8 месяцев назад

Great video! Very clear instructions. We used to have a manual changer at my Pop’s old gas station. You use the pry bar to install the tire the same way you use it to remove the tire, the knobby end of the bar will guide the tire onto the rim, when you rotate the bar around the center post. It easier and gentler than prying the tire on. Good job!

@DeanoOutDoors 8 месяцев назад

Thank you, I appreciate your comment.

@jdtown6585 Год назад

Freaking nice job, buddy. You made it look easy with one bar while other videos you got guys struggling with 2 or 3 bars. I'm sure it also depends on the size of the tire and rim but still, you made it look really simple.

@DeanoOutDoors Год назад

Thanks! I found it even easier to Mount new tires versus old ones. The older the tire the stiffer it gets. I am now using BeadBuster Tire mounting lubricant for removing and installing tires. This made the job a lot easier.

@ya472 8 месяцев назад

I did a few modifications: welded the base together, bent the bead-breaker arms, so welded an extra bar to one side, and had to grind an buff the bar end for removing the tire, as the sharp edge was damaging the tire. I think I also did some grinding and buffing on the goofy end. I also just ordered a cone for doing aluminum rims, as that hold-down is brutal on rims.

@DeanoOutDoors 8 месяцев назад

Great mods! I’ve been doing a couple as well to add a little more strength and ease of use.

@itsMadrizzle 19 дней назад

what cone ?

@ya472 19 дней назад

@@itsMadrizzle I twice ordered aluminum centering cones to use on the tire changer, but both times, they sent something so small it just falls through the center of the rim. I just didn't want to spend the big bucks buying one locally.

@marcolinares-mu4oj 9 месяцев назад

Excelent video! You are great at showing how to properly doing it! Thank you very much

@Naomijane55 Год назад

Thanks. It's been forever since I had used this bead breaker, and I couldn't remember how to use it! Worked great.👍

@DeanoOutDoors Год назад

Your welcome! Great to hear.

@650nelson 8 месяцев назад

I inherited one, I love it! Tip: Use a wire wheel to remove the red paint from the end of the bar and the hold down star, makes for a smooth and red marked free job!

@DeanoOutDoors 8 месяцев назад

Awesome! Thanks for the tip.

@restfulplace3273 2 месяца назад

Ramset make a recessed screw thread anchor. Install that in your concrete floor. Bolt the tyre changer in place when using, remove and store when not in use.

@stephenbonin3049 6 месяцев назад

Wow first time doing that you’re a natural!!

@richardreichow1969 2 года назад

I also got the same H.F. changer .. Price was $ 29.99 + tax + $ 16.65 for cement anchors and tool, another $39.72 for a hammer drill .. Total $ 88.56 ( so far ) .. I have added a length of electrical conduct over the top post to act as a bearing to turn as you move around the tire ....

@musterseeds1778 Год назад

Thank,,, it is a good demonstration of using tools..

@acke26 Год назад

best way to not scratch or damage the rim edge is simply to turn the rim upside down with the face pointing downwards. Just cut a hole in a rubber mat and place it on the top surface of the harbor freight tire changer. When working on the backside it doesn't matter if you get some minor scratches

@DeanoOutDoors Год назад

Great advice, thanks for sharing.

@Saberkitten007 Год назад

As a tire changer/Manager at a tire shop, not all rims can mount tires on the back side due to "that crevice also known as the drop center" That was described in this video is a valley where the bead sits for mounting and dismounting. Steel wheels and alloy can only mount/dismount from the top/face. Custom/deep dish wheels mostly mount/dismount from the back side due to the drop center closer to the back of the rim. A good indicator of this is where the valve stem is location and looking at the back of the rim to see either a small indent or flat. Will tell you that the rim will be either front mount/dismount or reverse mount/dismount.

@javierargote 8 месяцев назад

Great video,thanks for sharing.

@gayanendraghanshyam3232 3 месяца назад

Very informative, thank You From Australia

@DeanoOutDoors 3 месяца назад

Your welcome!!

@garyroberts2863 Год назад

Good Job well described useful thanks

@baltac.1341 Год назад

Thanks for the video.

@mick-tl5ui Год назад

Well done, looks like allot of fun

@DeanoOutDoors Год назад

Thanks, this tool makes changing tires so much easier. It’s even better now that I bought some good tire mounting lube.

@MonsterHobbiesModelCarGarage 8 месяцев назад

Thank you for showing this. I am building a garage for 1/25th scale model cars and I was looking for a simple tire changer for antique autos and I think that modeling this from styrene plastic tubes would be quite easy.

@DeanoOutDoors 8 месяцев назад

Your welcome! How cool, I can’t wait to see your video on how it turned out.

@MonsterHobbiesModelCarGarage 8 месяцев назад

@@DeanoOutDoors Might be a little while. I'm detoxing from Halloween!

@davegilesuk 8 месяцев назад

Thank you @deanooutdoors have one of these but only use it to break beads when refurbishing wheels. Am going to try this!!

@DeanoOutDoors 8 месяцев назад

Great to hear! It’s awesome for breaking the beads as well.

@Alpha-ms9nj Год назад

Nice job and thanks for posting. I been watching a ton of these videos as I wait for the weather to warm up so I can install and use the one I just purchased. I already anticipate bending the bead breaker tube and the bar. It seems like a decent tire changer that has the basics you can then modify to make it more HD like many on RU-vid have done.

@DeanoOutDoors Год назад

Thank you. Yeah, it is a great tool. It’s surprisingly tough as is but it sure wouldn’t hurt to beef it up a little. Get yourself some good tire mount lubricant, it’ll make the job so much easier.

@Alpha-ms9nj Год назад

@@DeanoOutDoors - Yep for sure. I changed many tires shops I worked at back in the day and always lubed up the the beads. I'm swapping tires onto 4 new rims on my Jeep and can't wait to put it to use first time.

@richardgraham3658 Год назад

Nice video wish I'd saw it before doing my first set, which were 17". A suggestion when removing tires keep the red bar at a steeper angle, it causes the tip to lift the tire, lower angle close to the rim makes it chisel into the bead, which can RIP the bead. Great mounting I had to start exactly like you did but had to use the pry endand a screwdriver to stretch it to the pop on. I had help too as I'm not very large but they were 265/70R 17.

@DeanoOutDoors Год назад

Thank you. Good info to know. I now use a good amount of tire lube when using this tire changer. It makes a huge difference, so much easier. For the price, this tire changer is awesome.

@Tay-ok2bh 17 дней назад

Anyone now how to do low profiles

@richardgraham3658 16 дней назад

@@Tay-ok2bh yes. With a lot of elbow grease.

@DeanoOutDoors 16 дней назад

@@Tay-ok2bh If you use this adaptor in this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c7i0NWZ9dDk.html it will bot be that bad.

@freddaniali 2 месяца назад

Thanks Deano!!!!!

@DeanoOutDoors 2 месяца назад

Your welcome!!

@user-db2sf3gg9q 9 месяцев назад

Taking the tire off with one ain't that bad but putting a low profile back on the rim is ridiculous with one of these. After hitting my hand multiple times from bar slipping I got the tire off. I could only get new tire halfway back on rim and said forget it. Even if ya got that thing bolted securely it still wobbles in the worst way. My hats off to ya guys that have the experience to use one efficiently.

@DeanoOutDoors 8 месяцев назад

Low profile tires are difficult to mount in general. Try using this next time and it will make a world of difference. Tire Mounting Lube: amzn.to/3XgUoCE

@jasonsmith373 3 месяца назад

Thanks!

@chipjohnson23 Год назад

So now I'm going to try it on my six-ply Goodyear off-road tires and see how it works I'm going to take a big heat blower and warm them up first I got one on my hand but it was a terrible battle

@DeanoOutDoors Год назад

I have since bought BeadBuster Tire mounting lubricant, this will help you out tremendously in removing and installing your tires.

@jerryanstey7058 7 месяцев назад

I didn't know they had Harbour Freight in Canada EEH !

@nickaxe771 7 месяцев назад

You made that look easy Sir.....would you know if this will work with motorcycle tyres?

@DeanoOutDoors 7 месяцев назад

It’s not too bad. Did you happen to see my newest video using an attachment? It makes removing tires so simple. As far as motorcycle tires, i think you’d need an adapter. This model is not designed for them.

@victorvico4995 6 месяцев назад

Bravo thank u

@Bayleeeng Год назад

Nice Job sir

@DeanoOutDoors Год назад

Thank you!

@dmc31405 9 месяцев назад

Thanks for sharing. At today's pricing at tire shops you could easily recoup your investment on one or two tire swaps. I got a quote for $30.00 per tire to swap some tires that I bought online today. The cost of everything is getting out of control.

@twagner6155 4 года назад

I guess if you only have a junk tire it's ok to practice on it, I made my own tire changer on T wagner RU-vid and it's a similar design to yours. I mounted 2 tires, new ones, so far and did it slightly different to your method using only the pointed end of the bar

@DeanoOutDoors 3 года назад

Nice! I have recently bought a new mounting bar that makes this project a whole lot easier. I'll be uploading a video soon!

@twagner6155 3 года назад

@@DeanoOutDoors I really needed to see your video since I was making my tire changer from scratch. I have since made a bead seating tank, works good.

@andyjohns1374 4 месяца назад

Do you have agents in East Africa

@unityforall-md4fl 11 дней назад

I realize the tire spec for the tire changer is for 16 inch. I guess everyone has been using it for regular car tires 16+ inch without issues?

@DeanoOutDoors 10 дней назад

I have changed 17” without a problem. If you start changing larger tires, you may need some mods done to the changer.

@Mac-bn Год назад

What size is the bolt that you mount to the floor, there are 2 parts, 1 is the bolt and the things you drill to the floor and inserted what do you call that, thanks

@DeanoOutDoors Год назад

That is 3/8" x 1-5/8" Steel Drop-In Anchor

@Mac-bn Год назад

@@DeanoOutDoors Thank you. You safe me from guessing.😀

@mtopxsecret6 2 месяца назад

Is this bolted to the floor? Thanks

@DeanoOutDoors 2 месяца назад

Yes, I used 3/8” drop in anchors. Link to the ones used are in the description.

@alfredogomez2984 9 месяцев назад

It is extremely difficult for me to keep the bead in place when mounting the tire.

@DeanoOutDoors 8 месяцев назад

Make sure to keep the bead in the recessed channel and the tire will mount much easier. ; )

@pureblood6310 2 года назад

Did it bend after hard use? Still better than crowbars and screwdrivers!

@DeanoOutDoors 2 года назад

I haven't bent the bar yet. Be sure to use plenty of tire mounting lube and it works great!

@cenewton3221 5 месяцев назад

I would think for occasional use it would be fine. Probably not great for frequent use.

@DeanoOutDoors 5 месяцев назад

I added this attachment ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c7i0NWZ9dDk.htmlfeature=shared. Really makes install and removal very simple. The attachment is a little pricey but worth it to me.

@ya472 8 месяцев назад

Shops are now refusing to work with tires older than 7 years. 😢

@TubolMotoadventures 2 года назад

does it scratch the outer rim paint?

@DeanoOutDoors 2 года назад

If you have painted rims, I would suggest purchasing the No-Mar tire changing bar. This setup works great on steel and aluminum rims, but the demount bar could scratch painted surfaces.

@krishnasonkamble4172 2 года назад

सुपर

@job38four10 2 года назад

Your the first one I seen use that curved end to put tire on, that always slips off when I try it, guess your smarter than the bar.........

@DeanoOutDoors 2 года назад

Haha, thanks. I found it works really well after a little practice. For the price of these manual changers, you can't go wrong. They sure are handy.

@terryroloff3538 6 месяцев назад

Where are you at, around here they are 59.99

@DeanoOutDoors 6 месяцев назад

Yeah, I see the price has doubled since purchasing mine. Still not a bad deal for the convenience of being able to change your own tires wherever you want.

@DaBossk Год назад

r u from like minnesota wisconsin or canada or something?

@DeanoOutDoors Год назад

Oh ya der eh, I’m a Wisconsinite. If you’re ever in da area, stop in for a beer or chree.

@DaBossk Год назад

@@DeanoOutDoors lol. your accent is quite strong bro

@DaBossk Год назад

@@DeanoOutDoors good luck during the snowstorm bro. it's gonna be awesome

@DBLACK-_-SHEEP 29 дней назад

its good for emergency but Bad for good rims it will scratched the hell out em

@DeanoOutDoors 28 дней назад

Agreed, that’s why I’ve since added the attachment with a duck bill. Great feature, no worry about running a rim.

@AkatDeen Год назад

my goodness... watch in 2023... it still helps...

@DeanoOutDoors Год назад

Glad the video helped!

@hippopneus360 10 месяцев назад

Pardon j'ai envie d'acheter

@DeanoOutDoors 10 месяцев назад

Can you order from Amazon? They do carry these.

@hippopneus360 10 месяцев назад

Mais moi je suis au Togo

@DeanoOutDoors 8 месяцев назад

Do you have access to Amazon?

@user-np2ub8ys5x 3 месяца назад

Tdk bgs stik nya. Sya sudah beli alat ini

@sandrosbackyard343 Месяц назад

you mounted it too close to the wall

@garymahon1955 6 месяцев назад

Thanks much!! i just bought one Thursday. Biden inflation! Paid over $64 with tax, on sale! I dont have a garage to bolt it down though. Will try heavy double plywood base. I really appreciate your work here on video!