How to use a table saw beyond common sense / Cove Cutting jig / Woodworking jig 

thank you Thanks to you, it helps me a lot.

Thank you. Have a good day

Kick back comes not only from a bind against the blade, but also occurs if the workpiece comes away from the fence and touches the back side of the saw blade, especially when no riving knife can be used, (as is the case in this type of cut.). Anyone utilizing this method of cove cutting should be cognizant of that. "The people saying it’s not safe have not tried it." Or, have tried it and found it not to be safe for themselves. To each their own when it comes to understanding their limits with respect to work shop safety. "I’ve been building miniatures for 21 years, often using a table saw for much scarier operations than this and have all my fingers." Performing an unsafe activity and emerging unscathed does not make that activity safe, it simply means that one got away with it. Experience certainly helps us to successfully perform risky tasks, but Life changing accidents in the wood shop happen so fast -before your body even has time to register the pain. I encourage folks who are thinking that an operation is unsafe to take the time to think through the operation carefully and determine how it can go wrong. Then, how can you change the operation to mitigate or eliminate unnecessary risks. Being cavalier with safety is typically a loser.

Unlike the suggestion of using a radial arm saw, on a table saw, if the piece lifts at all it looses contact with the blade. I wouldn’t try it but I think you could let go of the piece mid cut and it would just sit there. Scary doesn’t necessarily mean unsafe, wrong word choice. Being part of the group that investigates incidents at a 500+ person company, I am very aware of shop safety. You are correct, understanding your limits is very important. Another good shop characteristic is humility, both to ask for help if you need it and to admit mistakes. You make another good point saying before starting think it through and determine what can go wrong. More than a few accidents have happened by the operator saying “I got this” and jumping in without good preparation.

Do you have any videos on YT on how you do the tricky cuts for your miniatures?

@@jeffa847 No, at all my recent jobs I’m not allowed to take photos much less video. When I did architectural models 20 years ago, we’d make small scale buildings with dormers and complex roofs. Usually, there was a board with double sided tape involved to keep your fingers from being near the blade. The finished buildings for a site model might be as small as an inch square but with pitched roofs meeting at an angle. A sled on a 8” table saw is also helpful for miniatures.

Measure from the top / mid point of the saw blade, to the angled fence (measuring at right angles to the fence) This should be half the width of the board, so the middle of the saw blade is centred on the board. Check the blade starts cutting in the middle of the board when it's only 1mm above the table, and if it's off, then adjust the fence position accordingly before increasing the cut depth.

@@SoundsToBlowYourMind - TY ...

감사합니다. 좋은 하루 되세요.^^

Thank you for watching.

👍😉

I did to. 1985 wood shop class

Thank you. Have a good day

Thank you. Have a good day

How do you get the cut centered on the board? Seems like it would be difficult.

You make a cut to your desired final depth on a short, say 2 foot, sample board. Adjust your fence whichever direction is required. This is not a new technique. This has been done about as long as table saws have existed. @@ZzZ-qd1zo

Thank you. Have a good day

It is used in molding production.

Traditional houses in some regions use wood gutters. I could imagine this method to make wood gutter sections easily...

I will make a video again to answer questions.

Solche ausgekehlten leisten wurden früher oft an Holzdecken als Abschluss verwendet , zb in schlössern oder grossen Sälen

@@wolfgangkunzel7364 : sehr interessant und gut, wissen Sie. Ich werde dies bei der nächsten Renovierung einer Decke oder einer Wand im Hinterkopf behalten. Ich habe letztes Jahr eine kleine Decke gemacht, aber nicht daran gedacht. Danke. Wozu verwendest du sie, wenn man bedenkt, dass Toy den Wälzer genommen hat, um eine schöne Schablone zu machen?

It really is dangerous table saw blades are not built to take a side load. you really need to be careful when doing this. And don't ever try it with a thin kerf blade

@@aaronoconnor606 Or a very hard wood.

Nice to meet you. I support you. I will make a Bench Pillar Drill table soon. I hope it will be of help.

👍😉

Mostly crown molding and stack moldings. I just made a sleigh bed with cove molding.

Elliptical. The only circle that can be cut this way is if the blade is perpendicular to the cutting direction, and it only gives you a radius of cut that's the same as the blade.

Thank you. Have a good day

After setting the maximum height of the saw blade Measure the distance from the front and back of the saw blade.

After setting the maximum height of the saw blade Measure the distance from the front and back of the saw blade.

@@JigShop grazie amico grazie....farò il JIG...e poi mi metterò all’opera x studiare quello che mi hai scritto 👍👍👍😉

After setting the maximum height of the saw blade Measure the distance from the front and back of the saw blade.

It is harmless as long as you follow the precautions.

You saw it correctly.👍😉

Früher, ca. 1960, würden Treppenpfosten so gemacht, man nannte sie Krümmling! Oft war das Holz, Brasilkiefer!

돼요 오크로 많이해요

Good point, I'm glad you posted. I was thinking of the same purpose and had not picked up on that. What you and I are looking to do is very difficult and/or very expensive. 😁✌🖖

insan gerçekten utanıyor....bizim (bazılarında) insanımızda hiç mi görgü, adabı muaşeret kalmadı arkadaş...soru soruyorsunuz hiç nezaket yok,teşekkür yok ,takdir yok ...biz bu hale nasıl geldik anlamıyorum ...tmm herkes öyle değil ama var olan miktar bile bize yakışmıyor...değiştirin kendinizi

I've looked at "guitar neck carving jigs" and tried to think of ways to adapt it for that.

I'm also having a hard time thinking of applications for long boards with a single cove cut in it. one would be for a threshold/saddle between two types of flooring.... idk. the jig is awesome though, but i can get the same result with two clamps and a straight piece of lumber/straight edge. if I was a flooring installer, this would be a great jig for saddles lol.

@@tritian5874 I know, right?

They're commonly used for drawer pulls on professionally built furniture. Obviously, this video is just showing the jig to make the initial cove.

@@tonkatoy200 thanks Ben. This one really had me scratching my head. 🤔

its fine as long as the wood never touches the sawblade body. where the trick and experience comes in, with feeding in just enough to cut without going beyond the cutting diameter of the saw teeth. otherwise, the blade binds. not for the faint of heart, but can be done and can be done safely.

Say again??

This method has been used for a long time.

I learned one thing.😉👍

'If' ... provided one understands the reasons why kickback happens and takes steps to avoid it. It's perfectly fine. It's only dangerous for that, don't know.

Никак. Опытным путем один раз настраиваешь и ставишь засечки на рейке упора.

Für den Hobbybastler erscheint das immer noch wie schwarze Magie. Ich weiss, dass man solche Techniken in der Meisterschule für Tischler lernt, aber wohl nicht (mehr) in der normalen Tischlerausbildung. Und der Rest hat eben meist nur sein Halb- bis Viertelwissen.

ne Frager der Lager - ich kenne eine Tischsäge, die nach vergleichbarem Gebrauch neue Geräusche machte. IMO waren es die Lager, und es klang nicht toll…

@@r2d2v2 Seitliche Kräfte mag das Sägeblatt gar nicht, daher is es wichtig nicht zu schnell zu schieben und in mehreren ausreichend flachen Durchgängen zu schneiden. Für große Mengen lohnt sich da wohl eher eine Tischfräse oder ein Hobel mit den passenden Messern.

@claus-peterschmidt1478 kannst du mir verraten wie die Technik im deutschen heisst? Finde immer nur Englische Namen und Videos. Und wie nennen sich die speziellen Sägebätter? Hab das in der Schhreinerlehre leider nicht gelehrt bekommen und will jetzt meine eigene Recherche machen. Danke im voraus.

@@jnnkdrrsvideos6621 die Sägeblätter heissen "Kehlscheiben" oder "Kehlfrässcheiben", wenn ich mich recht erinnere. Die Technik müsste "Kannelierung" oder "Profilierung" heissen. Frag aber mal einen Tischlermeister, ich hab mein Diplom in Physik gemacht und mein Wissen über Ho,zbearbeitung in D kommt von Jonas Winkler, Phillip Konter etc und Sekundärliteratur. Man muss in dem Punkt auch bedenken, dass in Europa Tischfräsen viel weiter verbreitet sind als in zB USA, weswegen man hier Dado-Sets kaum kennt weil man meist für sowas Verstellnuter benutzt. Manche Techniken sind sehr "lokal" verbreitet.

That's beveling, not leveling.Sorry

its a decorative element, usually for trim pieces.

Or chairs. Seat and backs can be made this way. Victorian houses sometime have wooden external cladding that can be made this way. There are numerous cases where this might be useful. If course, you could also use planers with special blades etc pp. It is AN option, not THE ONLY option.

Have you looked at the price of store-bought mouldings?

Making cornice dumbo ;)

Mainly used in molding making

thank you the senior.👍😉

I looked and looked but never found your video on RU-vid.

😉👍

Probably just for something decorative.

Possibly a guitar fretboard radius sanding block?