How to use analog input/output signals modules - analog input output programming examples

Подписаться 31 тыс.

Просмотров 52 тыс.

50% 1

in this video, I simply show how to use analog input/output signals modules which is the best tutorial analog signal programming video. I show how we can use an analog input output module for processing and scaling analog signals. Analog signals such as 0 to 10 analog signals to control the analog output module or analog input 4-20ma for both analog input output module. I also developed a shot test program as an application of analog input output programming examples as plc analog inputs and signals as a nice tutorial analog signal programming lesson.
In this video, we discuss analog input/output signals 0 to 10 V, 4 to 20 mA 0 to 20 mA or 4 to 20 mA signals. These signals can be used to control analog field devices such as flow or level transmitters.
S7-1200 & TIA PORTAL main Preview course link
• Siemens S7-1200 & TIA ...
Links to the Full video of each lesson:
Lesson 1
• SIEMENS S7-1200 PLC TI...
Lesson 2
• SIEMENS S7 stop start ...
Lesson 3
• SIEMENS tia portal S7 ...
L 4
• siemens s7 1200 introd...
L 5
• Siemens S7-1200 TIA Po...
L 6
• ladder language progra...
L 7
• bit logic basics - bit...
L 8
• bit logic instructions...
L 9
• Tutorial on S7-1200 TI...
L10
• Tutorial on Siemens S7...
L11
• TIA PORTAL scan operan...
L 12
• BIT LOGIC programming ...
L 13
• configuring factory io...
L14
• Advanced Bit Logic Ope...
L 15
• Transferring a Factory...
L 16
• Tutorial on Siemens S7...
L 17
• on delay off delay tim...
L 18
• timer plc s7 1200 - si...
L 19
• Siemens TIA Portal tut...
L 20
• timer filling tank pro...
L 21
• Siemens S7-1200 TIA Po...
L 22
• counter input output s...
L 23
• compare instruction in...
L 24
• Math, Mathematics func...
L 25
• Math functions, SQR, S...
L 26
• Move instructions, PLC...
L 27
• Practical Move instruc...
L 28
• how to use CONVERT ins...
L 29
• functions jump label -...
L 30
• Siemens TIA portal Wor...
L 31
• Siemens TIA portal : S...
L 32
• How to use analog inpu...
L 33
• plc analog inputs and ...
L 34
• Siemens TIA PORTAL how...
L 35
• Transferring a Factory...
L 36
• siemens s7 hmi simulat...
L37
• recipe and alarms tuto...
L 38
• uploading program from...
L 39
• TIA PORTAL HMI simulat...
L 40
• user view screen liqui...
L 41
• siemens s7 1200 data l...
L 42
• Siemens TIA PORTAL & k...
L 43
• Siemens S7 pid control...
L 44
• recipes and alarms tut...
++++++++++++++ AWESOME courses to purchase
Now you can purchase these courses from www.plcgoods.com
1- Complete programming Siemens S7-1200 PLC & KTP 400 HMI device course
A 12:37 hours course / 44 complete videos
2- Complete Programming Siemens Simatic S7-300 PLC course
An 8:00 hours course / with 23 videos
3-Allen Bradley PLC training - RSLogix 500/5000 series
A 9hr/11min course/with 32 videos
4- Complete DELTA PLC programming course with ISPSOFT & FACTORY IO
A 6:00 hours course / with 24 videos
5-"CODESYS PLC programming tutorial for beginners"
A 6:34 hours course / with 21 videos
6-"Camtasia Mastery training course"
A 2:30 hours course / with 10 videos
7-Affiliate link to purchase Factory IO software
factoryio.com/url-action?ref=...
#plcgoods #plcprogramming #tiaportal

Опубликовано:

8 июн 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@steve-ip1cd 3 года назад

Another great and very helpful video! Thanks Reza!!!

@plcgoods 3 года назад

Thanks for your compliment!

@riaziiuc 3 года назад

thanks for a learing and fruitful video

@plcgoods 3 года назад

Glad you like them! thanks for checking out the channel!

@issod6425 2 года назад

Excellent!!!

@plcgoods 2 года назад

Thank you! Cheers!, glad you like it!

@cascadeanalog320 3 года назад

Thank you very much Sir !

@plcgoods 3 года назад

Most welcome! and thanks for checking out the channel

@lessspeech7129 3 года назад

Very Good！Thanks

@plcgoods 3 года назад

Thank you too! :)

@sletec6768 2 года назад

Nice work

@plcgoods 2 года назад

Thank you! Cheers! and welcome to the channel!

@adnanjayousi9140 2 года назад

Thanks for the video!, looks like there is a mistake on 9:34 , the min is 0 and the max is 27648 is it ?

@plcgoods 2 года назад

Thanks so much for watching our videos carefully. You're right and I mentioned this matter before testing (Time 15:20)

@irelandlotelugufamily2019 3 года назад

Hi Can you please help me as i am new to this programming world What is the difference between |RAW value and Scaled value do they need to be same always

@plcgoodsmentor9223 3 года назад

Hi, usually they are not the same. If you have a 13-bit resolution analog input channel, your raw input range is 0 to 2^13 = 8192, 0 representing the minimum value of your analog signal, 8192 representing the maximum value. analog input modules are suitable for a specific range. If you set it up for 0-20mA, and you connect a 4-20mA sensor, you won't have 0 as a raw value when the sensor output is minimum (4mA). If you want the 4-20mA to represent a water level between 10 and 300 cm, then that is your engineering range, also referred to as scaled range. usually, PLCs have some instructions to scale the received RAW value according to the next formula scaled value = (raw value * factor +offset) * unit of measurement

@plcgoods 3 года назад

thanks for the inquiry

@irelandlotelugufamily2019 3 года назад

@@plcgoodsmentor9223 Thanks very much for you reply So basically i am an Automation Validation Engineer, While performing FAT f on one of the systems on the HMI they are displaying RAW value and Scaled value for all the analogs of same make and model and signals are coming from same Festo but i see the difference between them is ns 3 deg and for some transmitters it is 0.2 deg . My concern is which is actual field value . If we consider Raw value as actual field value, then i will ask them to calibrate the Instruments . Sorry for this long reply

@Dirson2001 3 года назад

Hi all, vhen I have a defective Analog I/O module Sinad 6ES7232-4HB32-0XB0, the red LED starts blinking to show me the fault. Can I simply substitute the old defective to a new one or we must manage the soft for the new module recognization? thanks a lot.

@plcgoodsmentor9223 3 года назад

Hi there, I've never had your problem, but In my opinion, you can substitute the defective module to a new one with the same model. one time, I changed my CPU module with a similar CPU, and then transferred my project without adjusting the CPU model inside my program. it worked correctly.

@plcgoodsmentor9223 3 года назад

Also, If you want to use another type of analog module (with the same input type), you can transfer the PLC program to your computer, modify the selected analog module inside the hardware configuration window, and then transfer the modified program to your PLC

@plcgoods 3 года назад

thanks for checking out the channel

@msizingcobo9950 2 года назад

Thank you for the tutorial but how to do the conversion blocks using s7 300 cpu since the norm_X & scale_X don't appear when selecting s7 300 cpu

@plcgoodsteam8934 2 года назад

Hi there, note that each PLC may support some instructions that maybe are not used with the others. Also, now we are preparing a course about S7 300. It can help you to use analog signals with S7-300 PLCs.

@plcgoods 2 года назад

Thanks for checking the channel out!

@nareshsekar4807 Год назад

Hi Sir, (At Time = 14:45). What will happen if we didn't right the line "Move "0" to Electric Valve" if the level is not below 5. Will the Electric Valve still be open for 16mA current. If the level is not below 5 then the MOVE instruction will not move any value to the Electric Valve so the output analog current will be zero right then why should we have wright this line?

@plcgoods Год назад

Hi there, If the MOVE instruction is not enabled, then it won't do anything. In this condition, If "Electric Valve" is open, it remains open, and if it is closed, it remains closed as well. So, I needed to write the line "Move 0".

@nareshsekar4807 Год назад

@@plcgoods Thank you so much sir

@abdalishah8721 2 года назад

Verry Good Sir please tell me abot multi blade bridg saw machine plc

@plcgoods 2 года назад

this question is already answered!

@dispositivosautomatizados 2 года назад

👍🇧🇷

@plcgoods 2 года назад

Glad to help! Thanks for your comment and concern

@abdalishah8721 2 года назад

Sir how to create bridge saw machine plc program?

@plcgoods 2 года назад

Answered already!

@ahmedafifi2984 4 года назад

Very good 👍 Wanna be friends!!

@plcgoods 4 года назад

we are already friends, do not be worry!

@chrismerani5330 2 года назад

the terrible ai voice is unbearable.

@plcgoods 2 года назад

Thanks for checking the channel, it seems to me you paid more attention to the voice-over than the content quality. I am using Babalola which I guess is an excitingly fabulous program.

@chrismerani5330 2 года назад

@@plcgoods that's the point, I can't get past the voice over to even appreciate the content. I would rather hear a real human's broken English than a terrible robotic ai voice that sounds like it is from 1987