How To Use TeeJet Nozzles With a Chapin Backpack Sprayer

Подписаться 20

Просмотров 8 тыс.

50% 1

How to use TeeJet nozzles on a Chapin backpack sprayer.
TeeJet XR11004-VS www.sprayerdepot.com/products...
TeeJet AIXR11004VP www.sprayerdepot.com/products...
TeeJet TT11004-VP www.sprayerdepot.com/products...
TeeJet 45 Degree Elbow www.sprayerdepot.com/products...
TeeJet Quick Cap www.sprayerdepot.com/products...
TeeJet Quick Connect adapter www.sprayerdepot.com/products...
TeeJet 50 Mesh Filter www.sprayerdepot.com/products...
3/8” to 1/4” brass reducer www.acehardware.com/departmen...
Chapin Constant Flow Valve www.amazon.com/dp/B006Y852NW/...
Chapin 61900 4-Gallon Tree and Turf Pro Commercial Backpack Sprayer Chapin 61900 4-Gallon Tree and Turf Pro Commercial Backpack Sprayer with Stainless Steel Wand www.amazon.com/dp/B001FA09S2/...

Опубликовано:

4 мар 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@haroldkeyser421 2 года назад

It worked well. With a bit of adjustment of the amount of pipe thread tape and torque applied to the brass piece, the initial slow leak was fixed. This conversion is really useful, thanks.

@scotts4125 3 года назад

You have no idea how helpful this was. THANK YOU! I have a new Flowzone and I bought many new Teejet tips along with the QD caps. Not one video actually showed how to connect the QD's. They never showed you need that adapter. I called the sellers and they said just push harder because the Oring is new. lol Now it makes sense. Have one on the way thank again! I didn't buy the valve BTW. I bought the strainer with 5 PSI check valve. In theory when you let off the trigger everything in the hose and wand should stay and not leak out.

@culturalpractice6095 3 года назад

Glad I could help!

@Gino20202 3 года назад

Excellent video. Thanks for making it.

@user-gt2mo1nu4m Год назад

My sprayer still has some leaking at the quick adapter, i noticed the teejet nozzles came with a red gasket but that and the black gasket will not fit together. Any suggestions?

@culturalpractice6095 Год назад

Are you sure the nozzle is fully seated within the quick disconnect? If so, you may need to get a replacement unfortunately.

@kentdavis7787 2 года назад

my backpack sprayer already has the 11/16" thread on the end of the wand. you go from 3/8 (Wand) reduced to 1/4 then expanded to 11/16, why do you add a reducer? then expander? just for pressure?

@culturalpractice6095 2 года назад

The reducer isn’t for pressure. In the video, my wand isn’t angled and to use the TeeJet quick disconnects, I still would’ve needed a female to female 3/8” to 1/4” coupler for the male 1/4” TeeJet angled adapter. In your case, if you wanted to use the quick connect adapter straight to the end of your wand then you can do so. I don’t believe TeeJet makes a 11/16” male to male angled adapter though. Hope this helps.

@michaelzielinski7703 2 года назад

Will the 3/8 pressure reducing valve work on my Kobalt from Lowe’s?

@culturalpractice6095 2 года назад

Unfortunately, I’m unfamiliar with Kobalt’s line of backpack sprayers and don’t know the size threads the sprayer boom accommodates.

@michaelzielinski7703 2 года назад

Ok I got it! So for the Kobalt, you don’t need the 45 degree elbow piece. I unscrewed the existing nozzle and the whole quick connect system works perfectly.

@culturalpractice6095 2 года назад

@@michaelzielinski7703 that’s great to hear! Let me know if there’s anything I can do to help you further with!

@johnhenriquez3868 3 года назад

Wait I have the chapin too put mine is the plastic Wuan pump do I need to drig this whole set up just for the Air injection tip from teejet I can’t just change it and

@culturalpractice6095 3 года назад

If I’m not mistaken, you’ll have to use the same parts I have listed to incorporate any Tee Jet nozzle on your plastic Chapin wand. Hope that helps answers your question.

@johnhenriquez3868 3 года назад

Which tip would you recommend for a liquid fertilizer r application on lawn

@culturalpractice6095 3 года назад

@@johnhenriquez3868 depends on how the fertilizer absorbs into the grass. If the fertilizer calls for a foliar application then use the XR11004-VS since it’ll be a fine mist. If is a soil application use the AIXR11004VP since it will make larger droplets.

@Dustin-rb8mp 3 года назад

Can I not use the angle piece that comes with the sprayer?

@culturalpractice6095 3 года назад

Unfortunately no. The Chapin 45 degree angle elbow is 3/8” on both ends. The Tee Jet elbow is not and reduces from 1/4” to 11/16” to allow for the quick disconnect for the nozzles. Hope this makes sense.

@Dustin-rb8mp 3 года назад

@@culturalpractice6095 out of the 3 tips you have is one of them a wide fan good for applying plant growth regulator on Bermuda lawn? It's imperative that I apply it accurately and evenly.

@culturalpractice6095 3 года назад

@@Dustin-rb8mp all of the nozzles that I listed have wide spray pattern. If you’re using a PGR that has trinexapac-ethyl (T Nex or Primo Maxx), it is absorbed through the grass foliage and you should use the XR11004-VS that has will create fine droplets. If you’re using a PGR that has paclobutrazol (Trimmit), it is root absorbed and you should use the AIXR11004-VP, since that nozzle is air inducted it will create larger droplets and can penetrate through the soil. If you want more information on other Tee Jet nozzles and or if the nozzles I showed in the video aren’t applicable to your program use this link for more information (www.teejet.com/CMSImages/TEEJET/documents/catalogs/broadcast_nozzles.pdf#page=5) Hope this helps!

@Dustin-rb8mp 3 года назад

Man do you have Facebook? I could use your help. I bought everything you did and its not going together like you show. You can find me on Facebook Dustin Greenway.

@culturalpractice6095 3 года назад

I’m unable to find you. You can find me on Facebook though in the Southern Lawn Syndicate Facebook page. My name is Cameron Smith and you can find the same post I made about this there. You can comment on that post since they may be others who are having trouble too.

@Dustin-rb8mp 3 года назад

The brass part you used US NOT the brass part you linked in the description. That's the only mistake.

@johnhenriquez3868 3 года назад

Add me or call me I did the same set up order all the parts work great only thing that didn’t line was the nipple i had to go to Lowe’s n rig an compressor fitting and it work like a charm

@Dustin-rb8mp 3 года назад

@@johnhenriquez3868 I got it all figured out. Thanks for the offer

@kenanderson1240 2 года назад

It was difficult to follow you, you didn't seem sure of yourself connecting all the parts to the Chapin sprayer wand. Couldn't be see any details on the nozzles,

@kenanderson1240 2 года назад

Continued. ....hopefully all the attached files will help make sense of the parts & nozzles. Keep going, don't stop. conrep22@gmail.com conrep22@gmail.com

@culturalpractice6095 2 года назад

Thanks for your feedback, I can work on being more concise. All of the parts mentioned in the video and in the description fit properly. Is there a specific step that you need further clarification?