How to use the Darex E85 Endmill Sharpener/Grinder 

Just purchased the same machine. I'm so glad to finaly see a wonderful and probably the only video of someone demonstrating the use of this machine. Thank you so much for putting that out. A video is worth 100000 written words. Thank you again.

Very comprehensive. Thanks for taking the time.

We're playing with one of these, what I'd really love to see is a video demonstrating the set-up of the machine and how to determine the primary and 2ndary angles. We are reading the manual, but seeing it would be sweet

I have the same machine, i love it . you might want to replace the allen cap locking scew on the indexing ring with a brass knurled screw as was original...this wont mark the body of the spindle and also allows for far better grip for tightening it. also when loosening the collet, on the very front of the spindle there is a shallow pit machined into it and on the front face of the tailstock a little rivited pawl, this swings round and drops into the shallow drilling and locks spindle when tightening or loosening the collet chuck . hope that helps :)

Radio na istoj masini super lako ostri glodala, Super mashina

The Darex demonstration video says the spindle reverse is for carbide. Im not sure why though.

Very cool You can grind better with the machine how some manufacturers can do it. Sad that very few people get that Thanks for showing.

Thank you for the video . Well decribed my friend , subing now :)

I have to grind a drill with a specific tip angle. We have one of these at our shop, would i be able to do that with this machine?

Not very exciting but very informative !