How to Use the FormLabs 3B SLA Printer 

This video is exactly what I needed! Thank you!

You guys are AWESOME ...Ive been looking for a video explaining everything you got in this video EXCELLENT!!! Thsnk!

Great video guys! I’m starting a new job this week and I’ll be using one of these badboyz so I greatly appreciate the content ✌🏽

🎯 Key Takeaways for quick navigation: 00:00 🖨️ *Introduction to FormLabs 3B 3D Printer* - FormLabs 3B is an SLA printer that uses resin. - Components of the system include the printer, wash bin, and curing station. - Resin printing offers high detail and is suitable for various applications. 01:27 📄 *Resin Printing Materials* - FormLabs 3B uses various resin materials, including tough, white, and high temp. - Each material requires a dedicated tray and careful storage. - Resin printing allows for the creation of high-quality, detailed prints. 03:48 🖼️ *Resin Printing Process* - Resin printing involves printing upside down and using lasers to harden resin layers. - Proper platform and material storage is essential. - Isopropyl alcohol is used in the wash bin for post-print cleaning. 06:12 ⚠️ *Isopropyl Alcohol Handling* - Isopropyl alcohol used in the wash bin should be fresh and at the correct level. - It's important to keep the wash bin closed due to alcohol evaporation and flammability. - Regularly check and maintain the isopropyl alcohol level. 08:15 🛠️ *Removing Printed Parts and Support* - Printed parts can be removed from the wash bin. - Use side snips to remove support structures. - Be cautious while handling delicate printed parts. 10:23 🔄 *Changing Printing Materials* - Changing resin materials involves replacing the resin tank. - Ensure the cap on the resin tank is loose to allow resin flow. - Store materials and platforms appropriately. 13:30 🔧 *Leveling the Printer* - The printer may require leveling using leveling discs under its feet. - Follow the interface's guidance to adjust the printer's feet for proper leveling. 14:30 🖥️ *Using PreForm Software* - PreForm software is used for FormLabs 3B printer. - Proper orientation of the 3D model is crucial to avoid printing directly on the build platform. - Settings like raft, density, and supports need to be adjusted based on the print requirements. - Resin type and resolution settings should match the material used and desired print quality. 20:54 💡 *Printing Considerations* - Consider the volume of resin required for your print. - Resin volume can impact the cost of the 3D print. - Resolution settings can affect both print quality and printing time. 21:23 🖨️ *Printing Recommendations* - Printability factors such as cost per milliliter, supports, and cups, - Tips for successful printing, including tilting pieces, reducing overhangs, and avoiding suction cups. 26:44 📤 *Uploading and Starting Print* - Steps for uploading a print job to the printer, - Confirming necessary precautions like the vent cap and handle being locked down. 27:10 🧼 *Washing and Post-Print Handling* - Placing the printed object in the washing basin, - Initiating the washing process and ensuring the cap is closed, - Drying the print and preparing for support removal and curing. Made with HARPA AI

Hi guys great video. I have a question: until recently I had the first formlabs printer and by going into the settings from the software via PC or directly into the printer settings from the touchscreen, I could set the printer in open mode...by disabling the resin temperature sensor and the tray refill sensor. Is it possible to do the same with the 3B and 3B+ I just bought? Thanks for the reply

Can anyone please tell me the approximate cost of printer

So far using formlabs Form 3 Do you think it is still easy to use? Or recommend new machines from other brands I want to buy one recently, but this is the old technology of the previous two years. Printer technology is always changing, still considering... Is there a recommended discussion platform?

Question… is it ok to leave resin tank in the printer even if you do not use the printer soon??

Hey, a quick question: Where did you get/make the tool holder for the formlabs which is mounted to the wall. I really like your setup there *thumbs up

A cotton mouthmask doesn’t help. Nitrile gloves do…

Can you do a Vid on printing Dentures??

Sim entendi verdade nao e minha o Ape consulta vamos conversar ok

Lasers Dr evil voice