How to use the Horiba LabRAM Aramis Raman Microscope at the Molecular Foundry

Подписаться 48

Просмотров 1,3 тыс.

50% 1

This is an introductory training video intended for users of the Horiba LabRAM Aramis Raman Microscope in the Inorganic Nanostructures Facility at the Molecular Foundry. This basic tutorial covers:
Microscope overview / manual - 0:16
Turning the system on - 1:25
Loading samples - 4:43
Opening the LabSpec software - 7:14
Coarse Focusing (low mag.)- 8:12
Fine Focusing (high mag.) - 13:42
Setting up the spectrometer - 14:42
Acquiring spectra - 21:43
Viewing spectra - 25:29
Extended range spectra - 26:01
Saving spectra - 26:56
Changing/removing samples - 28:35
Shutting down the system - 29:14
Additional resources:
Online PDF manual (LBNL users only)
sites.google.com/lbl.gov/rama...
Wavelength calibration of the LabRAM spectrometer
• Wavelength calibration...
Using the NIR detector of the LabRAM microscope
• How to use the NIR det...
The Molecular Foundry is a Department of Energy nanoscience user facility in Berkeley, California, USA. The Horiba Raman microscope and many other instruments are available to scientists through the Molecular Foundry User Program. For more information, visit foundry.lbl.gov

Наука

Опубликовано:

29 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 5

@emorychanmolecularfoundry398 5 месяцев назад

Omitted detail / Troubleshooting tip: If you can't see the (green) laser spot as in 12:54, it may be because the laser shutter is closed. You can open/close the shutter using the button directly under the words "Aramis" (above the Setup button) on the right-most column of the bottom toolbar.

@emorychan1135 3 года назад

Pro tip: If you find this video too fast/slow, adjust the playback speed in the settings.

@emorychanmolecularfoundry398 3 года назад

Jump to section: Microscope overview / manual - 0:16 Turning the system on - 1:25 Loading samples - 4:43 Opening the LabSpec software - 7:14 Coarse Focusing (low mag.)- 8:12 Fine Focusing (high mag.) - 13:42 Setting up the spectrometer - 14:42 Acquiring spectra - 21:43 Viewing spectra - 25.29 Extended range spectra - 26:01 Saving spectra - 26:56 Changing/removing samples - 28:35 Shutting down the system - 29:14

@emorychanmolecularfoundry398 2 года назад

Toubleshooting tip: If you don't see the laser peak at 0 cm^-1, then double check your units on the x-axis of your spectrum. If it says "wavelength (nm)", then go to Menu > Options > Unit and select "1/cm"

@emorychanmolecularfoundry398 3 года назад

TROUBLESHOOTING TIP: If the camera doesn't seem to be responding (or if it the camera image window doesn't pop up when you click the camera button), try restarting the software or the computer. For more info, see 7:47.