Thanks mate, was doing my head in trying to work it out with the online manual. Wasn't clear regarding clicking in the wheel button and holding down the menu button.
Impressed with so many questions answered OP! How does the boiler know which time program to use? e.g. If I set mon, tue, wed etc all separately and then set Mon-Fri timers, will it just take the last one I set (Mon-Fri) and ignore the individual days previously set? And how would I get back to individually set days? Do I just set them again and the device will change the option from Mon-Fri to Mon, Tue, Weds individually set times?
I’ve set the heating times but the bars on the bottom are all on. So the heating won’t go on to auto. I’ve done the water settings and that looks like your video. What have I done wrong ?
Hi, thanks for all your help - I just wanted to check, using the settings you exampled - does it mean that the heating is off from 10pm until 7am? Ideally i just want three periods 6am-10am @ 24c, 10am until 6pm @ 20c and 6pm until 6am the next day @ 18c. I cant find anywhere how to leave the heating at 18c all night!
Sure, in order to leave your temperature 18 at night you need to set the off temperature to 18 during that time period. Example - 20c pm -10pm 18c 10pm - 6am
We have this thermostat. The CH is in off position temp showing as 20 degrees. When I push the circle I get permanently 5 degrees. Yesterday evening the heating came on randomly. Can u explain. Thank you very much
Hi, when you twist the dial the central heating will only come on when the temperature of your room drops below the permanent setting! The heating should never operate in the off position or when current temperature is above the desired permanent temperature. Hope that helps
Hi , i have programmed it to come on lets say at the mo its selected as 5:45 - 7.00 am and 14:00 - 16:00 pm but i hear it fire up outside of these times and heat the radiators , i’m quite paranoid thinking when I’m out of the house mainly at work it will turn on any suggestions?
My issue with this is we turn the thermostat to say 21 degrees, it reaches that temperature, and shuts the radiators down to keep it at 21, the problem with this is the house just seems to lose heat quickly and there isn't that slow radiator cool down period from the previous simple on/off boiler we used to have.
You could have poor insulation in your property which is not retaining heat very well. Depending how cold it is outside will depend how quick it drops in temp again
Hi Adam i have the Worcester RF1 thermostat but the principal is just the same , my question is when pressing the dial in the settings menu what does DST mean
Have set CH weekly programme. But getting no heating have tried turning dial up and pressing but heat not increasing. Pressing On and Adv. Any ideas? Thanks.
Try it on manual control. Heating on. Twist dial to 25. If control doesn’t work at all. It needs replacing. If it works on manual, there’s an issue on the timer side
I have this thermostat but it's not turning on even though I changed the batteries. Any ideas? It worked previously but then stopped. Thanks for the vid.
I have the same problem. No RF signal said and I took out the key from the boiler, turned the boiler on without key, boiler off, put in the key, boiler on and still have the same problem. If I touch on the thermostat the heating button is not reactive at all. On the display is still ON.
Hello. My boiler seems to be not stopping at all. I've programmed the hours. Does the end temperature (let's say 6am at 15 degrees till 12pm at 16 degrees) mean that boiler will try to keep that temperature up until next period of heating? Thanks for any help!
So if the off temperature is high the system will remain on, until the next programmed on time, that might explain while on Auto my heating isn’t going off at night.
Bottom of the unit is a tiny slot, you need to get a flat screwdriver in there any prize it away. It then separates from the wall bracket 👍 batteries are there. You can also buy a stand if you don’t want it on the wall
Hi ii am renting a property with this thermostat and have just been pressing buttons randomly. It now says Key Lock. Do I need to get rid of this message. Any help would be would be appreciated. Thanks
Hi there. Sometimes the flame Sybil takes a while to show up. When the unit goes to sleep after a few seconds, wake it back up and the symbol will show. 👍
If you just turn the dial and press nothing else, does it just raise the temperature temporarily or does it mess with the whole setting? My folks are out of town and I was cold as hell but they're a bit particular about these things and if it's 4 degrees hotter every Monday I think they'll begin to suspect I messed with it 😂
When I try to increase the temperature with the dial it moves randomly and not high enough for what we need. We have not had any problems previously. The thermostat is approximately 7 years old. Help please.
could this stat be faulty my mother in law has had a new boiler with this exact same stat, you turn the dial even to 28 and heating dont come on, also the hot water comes out and then goes cold, waiting on the installer to get back in touch with us
Press the radiator sign top left. Keep pressing until the top left display says ON… then simply twist the circle dial and choose how warm you’d like your property. That’s it 👍