How to use W1209 Temperature relay controller and program the thermostat

Подписаться 107 тыс.

Просмотров 561 тыс.

50% 1

We learn how to use W1209 Thermost module
Purchase from Affiliated store:
All Products below have full free RU-vid Course
Arduino 3-in-1 ioT Learning Kit from SunFounder:robojax.com/L/?id=367
Purchase The best Ever ESP32 Camera Learning from SunFounder:robojax.com/L/?id=368
Raspberry PI Robot Camera Car kit from SunFounder:robojax.com/L/?id=365
Raspberry PI Pico CAr kit from SunFounder:robojax.com/L/?id=366
Subscribe To my channel now bit.ly/rj-subscribe
*** Free Course ***
Arduino Step by Step Course (over 100 lectures) Starts here • Lesson 00 What is Ardu...
** Purchase Arduino Start Kit **
Amazon USA: amzn.to/3z88F9G or just UNO board amzn.to/3aY7KOL
Amazon Canada: amzn.to/31an88J or just UNO board amzn.to/3pYxSNN
Amazon Europe (all Europe): amzn.to/3pMCHge or Just UNO board amzn.to/2PgGItD
AliExpress: s.click.aliexpress.com/e/_9uc7Xe
Banggood: www.banggood.com/custlink/3GD... or UNO board www.banggood.com/custlink/vKm...
eBay: ebay.us/B1JWLi
***** Purchase Authentic Arduino Uno from ***
Amazon USA: amzn.to/2KApAwK
Amazon Canada: amzn.to/37LZ8sW
All Europe Amazon: amzn.to/36YDSzn
The best thank you for me is to not skip ads and Subscribe 🔔 to my channel, like 👍 the video and do not skip the ads.. It is greatly appreciated. 🔔 😊.
I will reply to all Subscriber's 🔔 questions. So make sure to Subscribe.😊 .
Go directly to a section of video:
00:00 Start
02:20 Setting temperature
02:58 Connecting AC load
04:42 Testing with heat
07:37 Specification
09:28 P0 explained
11:48 P1 explained
12:26 P2 explained
12:42 P2 explained
11:55 P4 explained
How much power can this module handle: snipboard.io/UDJMCg.jpg
Incubator with humidity control AC module: • Using DIYMore SHT2000 ...
Incubator with humidity control DC module: • Using DIYMore SHT2000 ...
XH-W3002 AC Temperature relay control • How to use XH-W3002 AC...
DM-W3002 DC Temperature relay control • How to use DM-W3002 DC...
Incubator XY-TR01 Temperature and Humidity controller with LCD • Home Automation XY-TR0...
How to use a breadboard : robojax.com/L/?id=121
Tutorial by Ahmad Shamshiri from Ajax, Ontario, Canada
I need your help. I appreciate it.
Please subscribe to my other channel bit.ly/phpchannel
How much load can this handle:
robojax.com/learn/images/roboj...
Download manual from:
roboJax.com/learn/arduino/robo...
Tutorial by Ahmad Shamshiri form Canada
****************************
Arduino Step by Step Course (over 100 lectures) Starts here • Lesson 00 What is Ardu...
****************************
If you found this tutorial helpful, please support me so I can continue creating contents like this. Here is PayPal link paypal.me/robojaxTV
Follow me on Facebook robojaxTV
Follow me on Twitter: / robojaxtv
Follow me on Instagram: / robojax
Tutorial by Robojax.com
Get other projects code and learn Arduino
robojax.com/learn/arduino
#robojax #robojaxThermostat #robojaxArduinoCourse

Наука

Опубликовано:

12 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 861

@tomokoth4841 5 лет назад

One of the very few videos where somebody actually explains this things so clearly. I'll definitely give you a like.

@robojax 5 лет назад

Good to hear that. Thank you.

@dannyespenilla7148 4 года назад

Dane with my part hope to see you araund

@clamman7505 8 месяцев назад

does not work. 3 does not go above 14

@davidandora 4 года назад

Thank you! The instructions I received skipped all of the P settings, and I thought my unit was broken (but actually set to the default C, not H what I needed.) Very easy to follow and thorough.

@robojax 4 года назад

You are welcome. Cheers. Ahmad from Canada.

@mohamedsheikh2502 4 года назад

It was a great video .I just bought 2 of these units ,there was no paper work to show how to use them , thanks to you now I can use it in my solar project . God bless

@robojax 4 года назад

Glad I could help

@martink9785 4 года назад

You just stopped me complaining to the seller on ebay because my one was working backwards to how I wanted (was on cool, not heat). Another great video, very glad I subscribed. Thank you :)

@robojax 4 года назад

You are welcome. I am glad it helped you.

@aaronn6725 3 года назад

Thank you soooo much for your video and help! I got mine working because of you and all the incredible information you have given. Thank you soo much again. You deserve a lot more credit and recognition for your work. Happy new year. Keep up the great work

@robojax 3 года назад

You are so welcome! Happy New Year. Greetings from Canada. Ahmad

@pulesjet 5 лет назад

Purchased one for my DIY Peltier Chiller. Both the Peltiers and the Temp Control run on the 12V. Worked out just fine.

@robojax 5 лет назад

Good to hear that.

@susancheek8480 3 года назад

What an excellent and thorough video! Thank you so much!

@doitmyself6377 3 года назад

I bought this and I didn't know that hysteresis can be adjusted. I dont want my AC to go wild turning on and off with default 2 degC. Good I found your video. Perfect!

@robojax 3 года назад

Glad I could help

@golftrainingaidscom 6 лет назад

Nice clear video and a good explanation. Thank you for including the programming chart!

@robojax 6 лет назад

You are welcome.

@MonkeyWithAWrench 2 года назад

Thanks for the demo. I have one of these boards but lost the documentation years ago. Much appreciated!

@joshuamolen6386 4 года назад

Finally a video i can decipher!!!! Thank you so much!

@robojax 4 года назад

You are welcome. Thank you for not skipping the ads and keep watching it. This will help me a lot.

@stevenyap5978 4 года назад

Best tutorial among the rest..very thorough and well explained..robojax two thumbs up 👍👍🙏

@robojax 4 года назад

Glad you liked it!

@speedymonkey1380 Год назад

Thank you for such a great video! I didn't realize this thing had so many features.

@brightnovastar 4 года назад

Thank you for this video. Made my project so much easier.

@robojax 4 года назад

Glad it helped!

@JimProng 6 лет назад

Excellent video which makes setting the device up easy. Thanks.

@robojax 6 лет назад

You are welcome. I am glad you found it useful.

@Judds_RC_Crawlers 4 года назад

Thank you for the tutorial. I ordered this but it didn’t come with a instructions manual. Your video really helped me.

@robojax 4 года назад

You are welcome. Thank you for not skipping the ads and keep watching them. This will help me a lot.

@jasoncoe7613 6 лет назад

Very well explained! Thanks bud!

@robojax 6 лет назад

You are welcome.

@garrockwaters304 4 года назад

Thank you so much for the explanation for this devise! It came with no information.

@robojax 4 года назад

You are welcome. See my videos on other better sensors ru-vid.comsearch?query=temperature Thank you for not skipping the ads and keep watching them. This will help me a lot.

@Presso99 Год назад

very well presented, crystal clear explanation. Thank you Ahmad

@hubertrichardo4792 Год назад

Thank you so much as a beginner it is hard to find a foolproof tutorial your's sir is one of the best👍👍

@gauravjainindore 5 лет назад

ultimately brilliant and elaborative description. Thanks

@robojax 5 лет назад

You are welcome.

@NeaveConstantine 4 года назад

Thank you for your thorough explanation!!!

@robojax 4 года назад

You are welcome. The best thank you for me is to not skipping ads and Subscribing 🔔 to my channel, and liking 👍 the video. It is greatly appreciated. 🔔 😊. I will reply to all Subscriber's 🔔 questions. So make sure to Subscribe.😊 .

@RC-Flight 3 года назад

very helpful video! I purchased several of these about four years ago but need to reset it. your video helped me, because I could not remember how to set it up.

@anandjoshi8554 Год назад

Are this reliable enough to be used in a project ? or one should buy expensive controller?

@RC-Flight Год назад

@@anandjoshi8554 well I guess it depends on the project. If it’s Nuclear reactor or a guided missile project, or a human cryogenic freezer then no! But for anything else yes, they work great. I have six of them and they work great.

@anandjoshi8554 Год назад

@@RC-Flight 😇🤔🤔🤭🙄😷🧐 🤐 thanks 🙂

@WarrenPenner 8 месяцев назад

Very well presented! thanks so much for doing this. Much appreciated!

@bangdollarsign 3 месяца назад

Wow, these purpose built electronic devices are getting so cool!

@dubmob151 5 месяцев назад

The W3001 controller available for $3 works quite well, this seems to have similar function except it works off 120VAC, and switches the line to the output. Button user interface is different, with a low and high threshold setting used to control turn on and turn off for both heating and cooling, with the hysteresis determined by the delta between the two settings. Very useful. The cheap version uses thin gauge wire presoldered to the unit instead of screw terminals, so I just changed them to handle higher current. It does come with a housing, so it's more complete and ready to use. Modified one to get isolated contacts to switch a logic level signal rather than 120V.

@justlife2129 3 года назад

These relays are great. You can make very nice temp controller for very little money. I control my intercooler fans on my turbocharged Land Cruiser , it works very well.

@anandjoshi8554 Год назад

Are this reliable enough to be used in a project ? or one should buy expensive controller?

@justlife2129 Год назад

@@anandjoshi8554 It depends... If you build a nuclear reactor, then you probable need something more sophisticated... I used them in many different applications like turning my intercooler fans on my Jeep. I also used them in my cooler room as thermostat. They work and work ok.

@anandjoshi8554 Год назад

@@justlife2129 thanks

@anandjoshi8554 Год назад

@@justlife2129 Which connector would fit to blue colour relay modules in place of jumper /dupont / berg housing connectors ?? (2.54 mm pitch ) good firm connection

@atongidini5985 5 лет назад

Ty sir robojax... very informative.. very easy to install. Ordered another batch of this device for my incubator projects.. this is very useful for us beginners.. more power sir robojax...

@robojax 5 лет назад

You are welcome. Sir.

@DougWaterson 3 года назад

Thanks for a good explanation of the controller, that does not come with any instruction sheet. I appreciate your help.

@robojax 3 года назад

You're welcome!. I am glad you found it useful.

@JasperWaale 6 месяцев назад

Thanks, your video helped med, I miss how to set one thing to get my setup to work you showed me

@edakimling133 Год назад

Very good video; helped me out a lot. Thank you!

@formarjoram Год назад

Really clear and helpful explanation. Thank you!!

@robojax Год назад

Glad you enjoyed it!

@middleknight4292 6 лет назад

Explained very well, thank you

@robojax 6 лет назад

You are welcome.

@mikenkt7526 4 года назад

I bought the thing online and it came with no instruction at all. Hardly any info can be found online as well. But thanks to your video, the thing is all properly set now. Thanks for the detailed instruction.

@robojax 4 года назад

Glad I could help

@vicenterobles883 3 года назад

Great explanation. Thank you!

@robojax 3 года назад

You're welcome!

@Nifty-Stuff 8 месяцев назад

Wow, perfect instructions for this circuit, thanks!

@robojax 8 месяцев назад

You're welcome!

@pennylane8859 Год назад

I use this relais for a cooling fan (switch on/off) in the housing from my FMD Printer. It works great.

@zauq5010 9 месяцев назад

Very well explained, thanks 🙏🏼🙏🏼🙏🏼🙏🏼

@alexabadi7458 5 лет назад

An other great video, thank you ! :o)

@robojax 5 лет назад

You are welcome.

@electronicsandsweets5424 4 года назад

Plc subscribe my youtobe chanal Electronics and Sweets

@jackfinnerty7891 9 месяцев назад

Great video thanks!

@atulmits 3 года назад

Awesome video, like complete reference 👍

@robojax 3 года назад

Thanks for the visit

@mpume.dzwane9213 3 года назад

I take this time to thank the woman who gave birth to such a son. Man you are a blessing. All your videos are impressive and very informative please keep up the good work. Message frm South Africa.

@robojax 3 года назад

that is very kind of you. I will convey your thank you to my mom. I am glad you found my tutorial useful. Greeting from Canada.

@TheCosmicOutlaw2013 Год назад

excellent, helped me out bigtime...subbed..thank you

@robojax Год назад

Thanks for the sub!

@davidcurrie5260 2 года назад

Well done! Just a safety comment if I may. If you connect a test load as shown in the video be aware that 120 - 240 volts will be exposed on the back side of the circuit board. Use caution, or perhaps test with an LED and a 1K resistor in series with the relay contacts.

@robojax 2 года назад

Thanks. You may watch the latest version of this thermostat and new video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kZlTMNqXzo4.html

@fagica Год назад

What?

@simperfidelisfck 6 лет назад

Yes Mate ... super Nice video. Easy to understand. You good

@robojax 6 лет назад

Thank you.

@micheldenostredame1468 Год назад

Thank you for info.... This is useful thing...

@mathewajacob6696 2 года назад

Thank you for this video ❤❤❤

@deankay4434 3 года назад

I have only one question that no seller can answer, but if the 12 volt DC power is lost, then you loose your settings and have to start again. I am guessing this because they list “Static Current” of less-than 35mA. I looked to see if someone ask the question and watched the entire video as well. As a retired automotive ASE Master Tech since 1978, at 62, I still like to learn, but truthfully want to use it for a fan over my transmission cooler. I enjoy your explanation & the equipment you use and describe your findings. If this was a hobby, I would not own a Fluke 87 V digital multi meter. I tell people asking wiring issues on vehicles to use dielectric grease where exposed to water/moisture but also good grounds and these “Star” washer to dig into the metal. Most forget the ground side on a vehicles chassis and using voltage drop as a diagnostic tool. Thanks again for your clear videos. I am saving this one for myself!

@robojax 3 года назад

Hi Dean, The settings are saved when power is disconnected. Your assumption is correct on the amount of current. thank you for sharing your thoughts. stay safe.

@deankay4434 3 года назад

@@robojax Thank you so very, very much! The “Static Current” they refer to must be the amount of current this device consumes when on, digital display shining, just no “On-Off” activity. I intend to use an external relay to operate my fan. This makes the current requirements on the boards relay very low, actually making its relay last longer, because it operating the coil of an 80 ohm relay. Most eBay or amazon seller do not have the product nor ship it. The payment is sent with my address and is sent form another location. I saw this device will hunting for info on it. You did a wonderful job showing both different voltage and current levels. Even noise on the out put was a bonus, important to some, but will not affect my use. Oh many blessings on your effort as video are work too. It looks like tape would hold down the NTC thermistor when the heat gun is blowing it around. I had plans to place it in the back of my custom console. It would not be fun to re-set it once power is shut off. Once again, thank you so much!!!!

@TravelNomad88 2 года назад

Thanks very helpful

@sonam0007 6 лет назад

Really nice instruction

@robojax 6 лет назад

Thank you.

@rustamrustam7187 3 года назад

great information

@niazamin3255 3 года назад

great job

@chicku975 3 года назад

Nice work!

@robojax 3 года назад

Thank you! Cheers!

@hopechannelcat5462 4 года назад

thanks, helps a lot.

@robojax 4 года назад

You are welcome.

@ramenlamian Год назад

This guy is a legend

@akramAkram-vj1dx 3 года назад

Good work

@daytradexchange9228 4 года назад

Great video. Question: I will be connecting this thermostat to a relay in my truck (12V). When the power is disconnected from the thermostat module (via relay) will the setting on the module remain at MY settings or will they default to a factory setting when relay restores the power to themastat module? Thank you.

@robojax 4 года назад

I retains all data. Nothing will be lost.

@eng.ahmadsamy6588 4 года назад

great thank you

@robojax 4 года назад

You are welcome. Ahmad from Canada.

@eng.ahmadsamy6588 4 года назад

@@robojax .. welcome of you .. that,s happy to me .. thanks

@junaidjunaid-om4ts 3 года назад

Nice information

@How2Forex 2 года назад

Best explain ever,, like

@robojax 2 года назад

Then please subscribe to my channel. Thank you.

@danielcozzolino5991 2 года назад

Hi, thank you for the detailed video. I have been using this module to control a greenhouse misting system to cool down if it reaches a certain temperature. It’s been working well up until I needed to disconnect the power supply and after reconnecting the temperature reading continues to rise up to 110c despite no significant increase in room temperature. It does this even without the temperature sensor connected. I have also tried resetting the unit with no change to result. I purchased a second unit and have had it connected for 3 weeks before it started doing the same thing. Have you experienced this and might you be able to offer some direction to fix? Thank you.

@robojax 2 года назад

Hi, if turning the power OFF and ON again does not help, check the wiring or crack on PCB, if you everything is okay, then it is damaged.

@Asifasif-eq9ff 3 года назад

good job

@safetyalways7788 Год назад

great tutorial. Please can i use this device to control Air Conditioner compressor and condenser fan as my PCB relay is bad.

@dannyespenilla7148 4 года назад

Done with my part hope to see you around thanks

@robojax 4 года назад

You are welcome.

@cbt1989gy 2 года назад

Very good explaining video... One question, can I run a 12v input into the power feed (Positive and negative) then a 12v power source into k0 and 12v appliance into k1?

@robojax 2 года назад

Yes you can power this module with 12v and your load can be also 12v

@dapilahdaniel8086 2 года назад

Thank you Robojax

@electronicsandsweets5424 4 года назад

Good sir i like your videos

@robojax 4 года назад

So nice of you

@aminmoshfeghi8145 4 года назад

Thank you very much for very helpful explanation. can I use 110V as well ?

@robojax 4 года назад

you are welcome. this is operates with 12V DC.

@Teknopottu 2 года назад

You are talking about using of the relay? It seems that you can. If it's 10 amps with 220V then it should take 20 amps on 110V AC.

@michaelortiz4250 6 лет назад

When you splice and the wire in half and . And put the fan on. the other end do you have the plug do you plug in the wall outlet and have the electric run through it as it's hooked up to the battery to.

@robojax 6 лет назад

yes. Exactly. So if you have AC load, connect it to wall outlet. If you have DC load, then connect it to battery.

@autopeep24 3 года назад

Thanks, great tutorial. does the device setting hold if power is interrupted

@robojax 3 года назад

you are welcome. yes it does.

@Acorama 6 лет назад

good review

@robojax 6 лет назад

Thank you.

@NSaeed-vj6nt 2 года назад

Thank you for the great video and feedback on the comments. I purchased this controller but didn't use it because I was confused how will it know if the setup is to heat or cool. Things are very clear now.

@MuhammadUsman-dy4zm 5 лет назад

I need little expert help. My AirConditioner outside has a heat sensor when outside temperature is above 35 C it cools alot below 35C everything is fine as per its compressors working . Is there any way i can fix the temperature of sensor no matter how hot outside it gives the inside system temperature of 34C fixed any way possible ?

@sherifyehia478 5 лет назад

hii ,, Thanks for the full informative video .... I want to ask if this one could be used for 220V devices ?? as I just got it 125V as I didn't know that before getting it .... Thanks

@robojax 5 лет назад

You are welcome.

@Lisas4us 5 лет назад

This guy Robofax has obviously no clue. Sure you can use it on the switching side to switch 220V. I would'nt use this divice to switch anything, because after x times switching the realay will burn up. You need to desolder the relay and add the appropiate solid state relay for your purpose. T

@lazyh-online4839 4 года назад

@@Lisas4us or just a properly rated mechanical relay. Agreed don't use this with 220.

@anandjoshi8554 Год назад

@@Lisas4us can it be used to switching 12 v dc to ac ssr , safely ? Are this reliable enough to be used in a project ? or one should buy expensive controller?

@chavarin3694 2 года назад

For an incubator can í only use upper and lower limits or do i have to fill in all p1 to p6 spaces?

@mohanvvip 2 года назад

Thanks. Very clear explanation of programming the device. Is there a similar module that works with 5V?

@robojax 2 года назад

I have not see such thing. But you can buy very cheap boost converter where you can input 5V and it will boost it to 12v. I have video in that . Search my channel

@mohanvvip 2 года назад

@@robojax Thanks. I later saw that the solid state relay would work with an input trigger voltage anywhere between 3V to 30V to switch on high (resistive heater) loads, so no worries.

@michaelortiz4250 6 лет назад

Thank you for your import on the connecting up the controller

@robojax 6 лет назад

You are welcome.

@mustafaalsaqi Год назад

Is this sensor water approved? I need to use it for measuring the water temperature

@robojax Год назад

yes. it is made for liquid.

@Rastapapulus 3 года назад

Very thanks for this great video, actually I'm looking for a compact module like this to control temperature between something around room temperature to around 300c using thermonuclear type k or whatever that can handle that temperature. I'll be grateful if you have any answer to this. Thanks again

@robojax 3 года назад

you are welcome. you may use Arduino to measure and monitor temperature from this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VGqONmUinqA.html and if you want to have display, then watch this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BlhpktgPdKs.html or see all videos ru-vid.com?search_query=%23robojax_MAX6675

@Rastapapulus 3 года назад

@@robojax it's about cost and space, I want to put it in the oven

@robojax 3 года назад

I've not see modules with protected sensor such as k-type. so Arduino is your option for now.

@Sam_Typhlosion 5 лет назад

Bro can you please tell me can it run on 12v 2.1Amp or how many AMPS should we use?

@robojax 5 лет назад

this itself needs online 0.2A. When relay connects your load, the voltage and current depend on the load. The relay can handle up p 2kW see this robojax.com/learn/images/robojax_W1209_relay_load.png (i have put this in the description of this video as well.)

@rustymckenzie5805 5 лет назад

thank you,good job

@robojax 5 лет назад

You are welcome.

@rustymckenzie5805 5 лет назад

@@robojax ,have you look at the GRAVITY 800 AMP CAR BATTERY CAPACITOR GR-800BC

@robojax 5 лет назад

I just did. The title "800A" is very misleading and vague. 800A doesn't mean anything if they don't use the term "hour" like 800A/h or something. If someone send it for review, I will explain it. but I am not buying it to do the review.

@rustymckenzie5805 5 лет назад

@@robojax looking at the reviews from amazon.,IM THING (1)SOLAR CHARGER TO 12V DEEP CYCLE BATTERY TO 800AMP CAPACITOR TO INVERTER.,(2)LONG RUNS 140 FT GO 70FT CAPACITOR THEN 70FT TO 12V BOX ?YES/NO THANK YOU FOR YOUR TIME,RUSTY s.c

@rustymckenzie5805 5 лет назад

@@robojax if i ran 12v deep cycle battery to two of the capacitor to two inverter pull 110 from each to get 220/? thank you rusty SC

@Timbollew 3 года назад

Need some advice, I want to use one of these with 2x12v DC fans. Can I splice into the 12v DC power lead supplied for the fans to also power the controller?

@robojax 3 года назад

Hi, yes you can. it is called parallel. like at home you have fridge and TV connected in parallel.

@haziqhafizuddin8038 9 месяцев назад

Hi, Im just learning about this existing while taking abt a semester worth of time to do exactly what this does with arduino, so that sucks. I just want to ask, if I supply like 5V to the module, will the device work? I just want to use it for the temperature display and not the relay, so do I have to supply all 12V?

@robojax 9 месяцев назад

It works with 12V only.

@ashwinsanjaypanicker9446 2 года назад

Useful

@waseemAkram-zb4in 3 года назад

Nice sir

@rajababo5286 3 года назад

Great

@VANquishedAdventures 3 года назад

Thank you

@robojax 3 года назад

You're welcome

@cartoonanimations7028 5 лет назад

Soon reach 100k subscribers

@robojax 5 лет назад

It might be in 2 years. I am not sure.

@chandruprabakaran6892 Год назад

very nicely explained, btw can i alter the control range to 0-500 deg C by changing the sensor or this unit is calibrated for 10K NTC sensor only.

@robojax Год назад

if you want higher temperature and custom display with proper functionality, then you build your own. I have shown it here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-cD5oOu4N_AE.html

@yasserbadran4699 3 года назад

Thank u bro

@robojax 3 года назад

Welcome

@hmdmddh 4 года назад

hi thanks for the explanation i just have a suggestion if you can do it " is it possible to make the module without the temperature probe standard so that we can use the same module with an other sensor like light sensor LDR ; pressure sensor or any other sensor instead of the te,perature probe"

@robojax 4 года назад

You are welcome. here are my other videos on Temperature and humidity sensor ru-vid.comsearch?query=thermostat Thank you for not skipping the ads and keep watching them. This will help me a lot.

@user-mj9cr7mp5x 2 года назад

Hi nice hardware , i was thinking if insted of lamp i run a pump cycaling water into a radiator ( not neccary just for the example ) to cool down viaclhle motor . and the sensor positaion inside the radiator . if the tempuraute goes high , above setpoint . the relay close and the pump circate. and i zm curios if there is option to aplly PID . so the pump motor doesnt turn off imadatlly , but slow down when the mesurment is 2% close to the setpoint . sorry for my spelling mistakes . thanks Netael

@robojax 2 года назад

Hi, this is very simple timer. if you want to have full control, then use Arduino shown here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yJYXfaU9J34.html if you don't know about Arduino, here is my course worth $200 on Udemy is available for free on RU-vid here bit.ly/arduinoStepByStep

@gokukn2336 6 лет назад

wow clear explanation.. thank you..😊 i have a doubt..please tell how to connect the peltier module and pc's PSU to this device..? i have red and black wires in my peltier module.. how to connect these devices to this thermostat..? Im not good at electronics.. please reply..☺️ ( i would like to use this method for my cpu cooler)

@robojax 6 лет назад

your module has RED and BLACK. You need an extra wire (let's call it yellow). This module has 2 terminal (let's call them T1 and T2 ) connect red to + (positive) of power supply, connect black to T1 . Connect one side of yellow to T2 and the other side of yellow wire to - (negative) of power supply and it should work.

@gokukn2336 6 лет назад

Thanks for the reply.. :) In here, does the T1 and T2 represents the K0 and K1..??

@robojax 6 лет назад

I don't have the module in hand, but I remember there was 2 terminals that I connected the load, so those two terminals are referred to as T1 and T2

@abdulmuizz1348 3 года назад

Nice bro

@IBABY1000 3 года назад

Hi can you jump 12v to k1 and put the positive of the device needing to be powered (say a 12v water pump) to k0 and the negative of the pump to the gnd supply of the module?

@Timbollew 3 года назад

Yes, that's what I've done.

@michaelortiz4250 6 лет назад

When you splice at metering did you still took the plug and put it into the socket into the wall socket

@robojax 6 лет назад

didn't get it sorry. Re-write it please.