How to Wet Sand and Polish Varnish

How To Varnish Wood Quickly | Fast Epoxy Clear Coating Method

Этот пульт управляет пространством и временем!

ПЛАН ПРОВАЛИЛСЯ. ПОХОД НА ОХОТУ С НОЧЕВКОЙ В ИЗБУ ПРОХОДНУЮ.

小路飞嫁祸姐姐搞破坏 #路飞#海贼王

ПИ ДИДДИ - АБСОЛЮТНОЕ ЗЛО | Грязный Голливуд (белые вечеринки)

How to Varnish a Wooden Runabout

Подписаться 4,5 тыс.

Просмотров 26 тыс.

50% 1

Видео Поделиться Скачать Добавить в

Best Boat Building Tools: www.mgstudiowo...
We use ever product for sale on this website with great results.
Help Support the channel: www.patreon.co...
Lets Connect:
Website: maritimeclassi...
Instagram: / maritimeclassics
In this video I cover all aspects of varnishing your wooden runabout so you will have great successes. This is the method I have used for years with outstanding results on some of the most collectable boat in the world. This method can also be used when varnishing about anything.
Thanks for tuning into my channel! I know from experience that getting started and working through a restoration of an antique or classics runabout can be a daunting task and sometimes you do not know where to start. You may also find that you just get stuck on finding out how to complete a task you have never done before. Well, you have come to the right place! My channel is designed to help you get through the restoration and give you step by step instructions along with some tips and trick to get your task done and enjoying your boat out on the water. If you have any questions or want to see a specific video, please leave me a description of what you are interested in and I will try to answer them. Have a great day and keep restoring!. Thank you for watching!!!
DISCLAIMERS:
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
This video was not paid for by outside persons or manufacturers.
No gear was supplied to me for this video.
The content of this video and my opinions were not reviewed or paid for by any outside persons.

Опубликовано:

3 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 75

@jimbailey5655 Год назад

CAN'T WAIT TO GO THROUGH THESE PROCESSES. THANKS MIKE.

@JonnieBGuud 2 года назад

Great video Mike! Thanks for sharing!

@lawrencetrapani5623 Год назад

You have great work ethic, that's nice to see when you are giving your tutorials. Neat and organized is such an asset to your end result. Thanks again.

@MikeGreenStudioWorks Год назад

I appreciate that!

@joehand9650 Год назад

Thanks for the great information Mike,

@Trip0720 2 года назад

Thanks for another great video.

@motorv8N 6 месяцев назад

Great demo - thanks.

@stephent1117 2 года назад

Great job. The woodworking side is more of my thing, but thanks for the video's.

@rmatty67 2 месяца назад

Great videos Mike , very helpful! I will be refinishing my 61 Coronado barn find 1st of Sept and was wonder what sequence would you do on this boat? Start with the topside down with the white paint? Would you use Interlux yacht enamel or Pettit epoxy both in semi Gloss? Then the varnish for the mahogany? Plan on using pettit sealer after sanding followed by 5/10 coats of Pettit captains varnish. I'm assuming wet sand and buff to knock down any hard line where the paint and varnish meet? Any help would be greatly appreciated! Would like to see a video on some of the Centurys and CC's that had some elaborate paint schemes of the late 50's to mid 60's.

@MikeGreenStudioWorks Месяц назад

We are doing a Super Sport now that has varnish and then paint over it. We stained and varnished the boat first making sure we get the varnish nice and flat. Then taped off and painted the large black waterline and the white around the hull sides. We use Pettit varnish and paint.

@rmatty67 Месяц назад

@@MikeGreenStudioWorksthanks for the reply! After watching your videos numerous times , I figured to get that good and flat that's what is done. I bought the Pettit ezypoxy white semi gloss with ezpoxy primer . I followed your video on fixing dull varnish - bought the sander and paper from your site ( really works great) just finished my 2 coats of pettit sealer going to let that sit for a bit before I add 5 or so coats of varnish. How long should I wait before tapping that off before I start my primer and paint ? Also leave the tape on when priming then the final coats of finish? Or do I re tape after priming? Do I even need primer if I'm going over the 5 /6 coats of varnish? I know lots of questions ! Would love to see a classic Coronado or late 50's early 60 's Resorter with the elaborate paint schemes they used 🙂

@MikeGreenStudioWorks Месяц назад

@@rmatty67 We didn't use primer and just the paint over varnish. So you can just tape once, unless you have to do several coats to get it just right then re-tape after a couple of coats. Our first couple of coats didn't turn out like we wanted so we sanded the paint and applied 2 more coats and it came out really nice.

@jjaylad Год назад

Thanks for the great video. Sure would have liked to see you vanishing the hull and transom and how runs are avoided. Now ...why would I ask that? ;)

@neelthompson6512 Год назад

I love this video Mike. It takes all of the guess work out of varnishing a wooden boat. One question for you: How do you go about cutting the rollers?

@MikeGreenStudioWorks Год назад

We use a bandsaw and cut them to 3 inches. Thank you for watching.

@champuman Год назад

many thanks mike warner voelpert

@kyleybarra1830 Год назад

Quality video with great instruction. Thank you. What are your thoughts on using spar urethane vs varnish for harsh salt water conditions?

@MikeGreenStudioWorks Год назад

I have only used true varnish with UV in the varnish.

@billallen7716 10 месяцев назад

1:47 l have just had built for me a 14ft cedarstrip boat from Giesler boats,Powasson, ont. I am going to varnish it and wonder if you can help me figure out how much vanish l will need for one coat inside and how much for one coat outside for future reference. Thanks mike

@OferNRaz 2 года назад

Great video. Thanks for sharing. How long do you usually wait between varnishing and sanding? I just varnished, and after a few days, the varnish is still sticky.

@JonnieBGuud 2 года назад

With Petit high-build varnish I could easily recoat in 24 hours and usually waited 48 hours after a coat to sand. Sometimes waited a little longer if my sandpaper (arbanet like mike recommends) was gumming up. There are many variables so its a challenge to fully relate to your process and situation...

@MikeGreenStudioWorks 2 года назад

That really depends on temp and humidity and the varnish you’re using. With our shop around 65 degrees and using Pettit Captains 1015 we can usually coat one every day when building coats and only scotch-brite in between. When we sand, we usually wait 48 hours and when we wet sand a buff we let the boat dry for about a week. I will try to cover more on that on the next how to video.

@awardsworth Год назад

Great video as always. How much varnish do you use on say a 20' runabout start to finish vs. just doing a refresh coat to start the boating season?

@MikeGreenStudioWorks Год назад

On a 20' deck and sides from bare wood we would go through about 20 cans. If it was a refresher coat we would use about 5.

@CaseyKendall-x9m Год назад

Hey mike love the channel! New to all of this i have started on my 39 utility 320 the sides of the boat and relized ive got some other work to do before i seal the old varnish and apply my varnish. Wont get to it until spring now. Is it ok to leave it sanded for the winter without re sealing the old varnish? Thanks

@MikeGreenStudioWorks Год назад

It sould be fine as long as you keep it out of the weather.

@ghostboatsofsouthernmichig3773 Год назад

FYI, If you add 2 tablespoons of the 120 brushing thinner to your open can of varnish before closing the lid, Do not stir just let it sit on top of the varnish, it will keep the varnish from skimming over and be ready for the next use.

@fredburban8219 4 месяца назад

I use CO2 whippet in a bicycle tube refiller, i spray the CO2 in the can with the lid loose over it. CO2 is heavier than air and it puts a CO2 barrier to keep the varnish fresh. At $60/qt you have to protect it.

@karavoznaks Год назад

how would you recommend washing these boats after being in salt water? also do you have a video on best boat trailers for wooden boats?

@MikeGreenStudioWorks Год назад

I would spray it down really well with water to remove and dried salt scum and then use dish soap and water.

@karavoznaks Год назад

@@MikeGreenStudioWorks fantastic. thank you

@billallen7716 Год назад

Can you do a video on caulking

@MikeGreenStudioWorks Год назад

At some point I can but right now we do not have any boats that need caulking.

@PatrickWilson-fi4nl Год назад

Great Video(s) and attention to detail. Would like to know what determines when a plank or piece of hull material needs to be replaced? It seems like epoxy can fix anything but would like to know when to make the call on replacing a piece of hull material as I am new at restoring wooden boats. Thanks!

@MikeGreenStudioWorks Год назад

We only use epoxy to bond 2 pieces of new wood together and if the wood is questionable, we replace it. If the wood in question is only cosmetic and full thickness, we will try other methods like bleaching and sanding. If the wood is structural and compromised in any way we replace it.

@take2studio187 Месяц назад

Why do you use foam and not a brush?

@MikeGreenStudioWorks Месяц назад

Mostly cost. It hard to keep a hair brush clean through 15-20 coats of varnish. We wet sand and buff so a little dust or brush srtocks are not a problem. We dio use brushes sometimes for final coats on places we don't want to wet sand.

@CharlesThompson-d4s Год назад

When you varnish a new section and roll/brush back to the previous section, is there a waiting period ?

@billallen7716 Год назад

Can you tell us why you prefer a foam brush to a hairbrush

@MikeGreenStudioWorks Год назад

It cost way less for the foam brushes and you do not nweed to spend time cleaning your brush all the time. We do use a nice bristle brush for paint and finish coats of varnish when we are not going to wet sand and buff back to a shine.

@GergC0521 Год назад

Oh my, was looking at buying a 16' wood 1960 runabout that needed a facelift. Oh my this is going to be one helluva project. Question, do you strain your varnish before putting it in the roller pan? In case of sediment?

@MikeGreenStudioWorks Год назад

We do not, we use it streight out of the can. Stain the wood first and then coat the wood. Thanks for watching!

@scottstrand7865 Год назад

I was always taught to use denatured alcohol to wipe down rather than thinner. The alcohol evaporates quickly. Also to use diaper cloths because paper towels can leave fibers behind. Is there a reason to avoid the alcohol in favor of the thinner?

@MikeGreenStudioWorks Год назад

I think the thinner that is compatible and the same brand as the varnish is best. We know it won't effect the varnish when applied, we use it to make sure that any grease from our hands does not cause fisheyes. We use paper towel (Costco or Brawny) because of cost and easily disposed of. A good paper towel won't leave fiders behind and if they do its minimal. We also taxk cloth after so that picks up any dust or fibers left behind. Thanks for watching.

@ralphhanses3280 10 месяцев назад

Good morning, I am on my final coats and keep getting small bubbles that do not go away any thoughts? Ralph

@MikeGreenStudioWorks 10 месяцев назад

The small bubbles are most likely dust in the finish. That is why we wet sand and buff on almost every boat.

@JefferyHendrix Год назад

Mike, Great video. I'm up to varnish coat number 18 and I seem to be having trouble getting the varnish to flatten out. There are both brush marks and some small orange peel formations. I don't know it I putting it on too thin or too thick or if the varnish is too thick. I'm using the Pettit High Build 2015 and the Ultra clear on the sides now that I have the decals on. I'm nervous about thinning since I was warned not to thin. The shop is between 60 - 65 degrees with 25% relative humidity. I sand, clean and wipe down with Pettit the day before and the tack just before varnishing. Any help would be appreciated. Thanks.

@MikeGreenStudioWorks Год назад

You can add a cap full or 2 to the varnish and see if that helps. You may need to go with a nice Purdy fine hair brush for the final coat if you are not going to wet sand and buff. Let me know if that helps.

@JefferyHendrix Год назад

@@MikeGreenStudioWorks Thanks Mike. I've tried the thinning with no help. I started with a Purdy fine hair brush on the early coats but switched to foam.

@lawrencetrapani5623 Год назад

I haven't heard you mention dry time between your build coats, 24 hrs? Any specifics on varnishes you prefer over others? Or does that pertain to client preferences? Just a thought

@MikeGreenStudioWorks Год назад

At least 24 hours between coats. If we sand we like the varnish to dry a few days. We use Pettit Captians varnish here at the shop. You can find most of the prducts we use here. www.mgstudioworks.com

@lawrencetrapani5623 Год назад

@@MikeGreenStudioWorks I have clients that I allow to be Fussy! Ergo use Captains flag ship And others! Gonna butcher this one LeToinkinwa! Lol I enjoy all of them and more into traditional varnish and not the new varieties, stay with what's worked fine for 50 years!

@alleyoop1234 Год назад

Curious as to what steps are taken when sealing(?) and varnishing the interior of an old cabin cruiser. Would the varnish be rolled on, or sprayed??

@MikeGreenStudioWorks Год назад

We roll and tip all varnish. e seal with 2 coats of Pettit sealer 2018 and then thin the first couple of coats of varnish a bit the go full strength to build coats. Thanks for watching!

@johnhornbostel3605 Год назад

@@MikeGreenStudioWorks Do you also thin the first couple of coats when applying to exterior? If yes, what do you recommend for amount of thinning when using Pettit captain's varnish? Thank you

@todddunn945 Год назад

Have you used Epifanes varnish? Locally (Southwest Harbor, Me) that is the varnish of choice for high quality work. In my experience Epifanes gives better gloss than Captains and lasts longer. One other question. When you get to a "finish coat", do you sand out the varnish with 1,500 then 2,500 and buff it back to a super high gloss? That is the only way I have found to generate a high gloss, 100% dust free finish. Yes, I know there is never an actual finish varnish coat.

@MikeGreenStudioWorks Год назад

I have used it many times on larger boats that are in saltwater and may get used in harsher conditions. The stuff is expensive, and it really doesn't flow good out of the can. We do wet sand and buff and will be coming out with a video on that in the future. Thanks for watching.

@JeffMelnick-dz6hu 6 месяцев назад

Do you thin the Captains 1015 Varnish? If so (using the Pettit 120 thinner) what is the ratio? Thank you

@MikeGreenStudioWorks 5 месяцев назад

After we seal the boat with 2 to 3 coats of Pettit Clear Sealer we then thin the first 2 coats with about 20% 120 brushing thinner. After that the grain is full enough we go to full strenght varnish. Hope this helps and thanks for watching!

@ghostboatsofsouthernmichig3773 Год назад

You didn't talk about what type of sander you used with the mesh 320 paper. Mesh in hand, mesh on block, electric sander? ⛵️

@MikeGreenStudioWorks Год назад

We use the Mirka block that hooks to a vacuum, you can find it on my website. www.mgstudioworks.com/

@francisaquadro8460 Год назад

Should there be a concern with dust. It appears that you are finishing in an area which has other operations which may generate air borne contaminates.

@bobwallace6812 7 месяцев назад

Do you cut any layers of the varnish?.

@MikeGreenStudioWorks 7 месяцев назад

I am thinking you are asking about thinning the varnish. The clear sealer we use right over the stain is all ready thinned. Then we thin the first couple of coats of varnish with about 20-30% with thinner. The key is to get as much varnish on the boat so we stop thinning coats on about the 3rd or 4th coat.

@garybarker9139 Год назад

12 inch roller would be better!

@roywilkowski2326 4 месяца назад

I've been varnishing boats for 40 years. As soon as I saw the foam brush in the intro, I turned it off.

@shenaniganguy Год назад

I lost you at foam roller and brush.

@rickhuntling7338 11 месяцев назад

I know you're a boat expert, but I'm a scholar for the LORD. Ask me anything about HIM so you will know HIM and be in HIS Rest.

@MrOpaulo Год назад

use a tack cloth

@MikeGreenStudioWorks Год назад

at the 7.39 minute mark I used a tack cloth which we do on every coat. Did you not watch the whole video?

@MrOpaulo Год назад

after 3 coats of finish 320 fourth coat 1000 wet 5th coat 1500 wet that's what us boaters prefer

@MikeGreenStudioWorks Год назад

This boater says that won't last, 2 coats of varnish is as thick as a piece of paper and thats without sanding.

@MrOpaulo Год назад

your brush isn't loading up, its breaking down cause its the wrong choice to use

@MikeGreenStudioWorks Год назад

Its not breaking down. What brush should I be using?

Далее

How to Wet Sand and Polish Varnish

21:47

How to Wet Sand and Polish Varnish

Просмотров 23 тыс.

How To Varnish Wood Quickly | Fast Epoxy Clear Coating Method

12:57

How To Varnish Wood Quickly | Fast Epoxy Clear Coating Method

Просмотров 100 тыс.

Этот пульт управляет пространством и временем!

00:23

Этот пульт управляет пространством и временем!

Просмотров 176 тыс.

ПЛАН ПРОВАЛИЛСЯ. ПОХОД НА ОХОТУ С НОЧЕВКОЙ В ИЗБУ ПРОХОДНУЮ.

28:58

ПЛАН ПРОВАЛИЛСЯ. ПОХОД НА ОХОТУ С НОЧЕВКОЙ В ИЗБУ ПРОХОДНУЮ.

Просмотров 481 тыс.

小路飞嫁祸姐姐搞破坏 #路飞#海贼王

00:45

小路飞嫁祸姐姐搞破坏 #路飞#海贼王

Просмотров 12 млн

ПИ ДИДДИ - АБСОЛЮТНОЕ ЗЛО | Грязный Голливуд (белые вечеринки)

16:46

ПИ ДИДДИ - АБСОЛЮТНОЕ ЗЛО | Грязный Голливуд (белые вечеринки)

Просмотров 384 тыс.

How to Install a 5200 Bottom - Episode #1 Bottom Removal

6:52

How to Install a 5200 Bottom - Episode #1 Bottom Removal

Просмотров 10 тыс.

How to Fair the Hull of a Wooden Boat

8:24

How to Fair the Hull of a Wooden Boat

Просмотров 10 тыс.

How to strip paint off your wooden boat using a heat shrink gun

6:56

How to strip paint off your wooden boat using a heat shrink gun

Просмотров 175 тыс.

Super Rare Chris Craft 16' Hydroplane Restoration - WOODEN BOAT RESTORATION

6:29

Super Rare Chris Craft 16' Hydroplane Restoration - WOODEN BOAT RESTORATION

Просмотров 12 тыс.

WOODEN BOAT RESTORATION - How to Fix Old and Dull Varnish

7:06

WOODEN BOAT RESTORATION - How to Fix Old and Dull Varnish

Просмотров 18 тыс.

Hutchinson Wooden Boat Salvage

10:45

Hutchinson Wooden Boat Salvage

Просмотров 551 тыс.

Starting up our Wooden Boat: The Restoration Journey Continues!

19:06

Starting up our Wooden Boat: The Restoration Journey Continues!

Просмотров 6 тыс.

How to Varnish your wooden boat - Applying the final coats - Part 2 of 2

5:55

How to Varnish your wooden boat - Applying the final coats - Part 2 of 2

Просмотров 74 тыс.

Custom 1956 17ft Chris Craft Restoration -- Limitless

12:31

Custom 1956 17ft Chris Craft Restoration -- Limitless

Просмотров 93 тыс.

WOODEN BOAT RESTORATION - How to Stain your Wooden Boat

15:24

WOODEN BOAT RESTORATION - How to Stain your Wooden Boat

Просмотров 9 тыс.

Этот пульт управляет пространством и временем!

00:23

Этот пульт управляет пространством и временем!

Просмотров 176 тыс.