How to Wet Sand and Polish Varnish

Подписаться 4,4 тыс.

Просмотров 23 тыс.

50% 1

Best Boat Building Tools: www.mgstudiowo...
We use ever product that is for sale on this website with great results.
My Patreon Account: www.patreon.co...
Help Support the Channel
Lets Connect:
Website: maritimeclassi...
Instagram: / maritimeclassics
How to Wet Sand and Polish Varnish is a complete guide to how you can achieve impressive results on your antique wooden boat. I go through step-by-step instructions on taking your freshly varnished boat from great to a show shine. If you have any questions leave them in the description below and I will see if I can help.
Thanks for tuning into my channel! I know from experience that getting started and working through a restoration of an antique or classics runabout can be a daunting task and sometimes you do not know where to start. You may also find that you just get stuck on finding out how to complete a task you have never done before. Well, you have come to the right place! My channel is designed to help you get through the restoration and give you step by step instructions along with some tips and trick to get your task done and enjoying your boat out on the water. If you have any questions or want to see a specific video, please leave me a description of what you are interested in and I will try to answer them. Have a great day and keep restoring!. Thank you for watching!!!
DISCLAIMERS:
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
This video was not paid for by outside persons or manufacturers.
No gear was supplied to me for this video.
The content of this video and my opinions were not reviewed or paid for by any outside persons.

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 56

@Kevinmarkey1227 2 месяца назад

Excellent video showing in clear terms how to get a professional finish. I followed your instructions to sand & polish a live edge bathroom countertop finished with Epiphanes and the result was just about perfect. Thank you!

@goaskmymom1350 Год назад

I have straight compound lines on my garage ceiling and down the walls, bugs the wife! I'll start feathering it first from now on! 👍 Appreciate you sharing your tips and so will my wife!

@jjaylad Месяц назад

A skating rink for flies!!

@alleyoop1234 11 месяцев назад

I am currently restoring a 1957 Scottie Craft 21ft mahogany cabin cruiser, and am at the varnishing stage on the interior. It was really cool to see I use lterally the exact same method for cut & buff on auto & motorcycle paint(mostly polyurethanes)!😉

@steveanderson3799 Год назад

Mike, thanks for the details…it’s important for new restorers like me. Thanks again!

@tastycake1969 Год назад

Great video Mike.

@renanace Год назад

Very helpful. Very clear, step by step instructions.

@robparrish5798 9 месяцев назад

Amazing technique. I spent the last 3 months slowly varnishing all the teak on my sailboat up from bare wood. Did way too many coats as was always hoping for one which would magically not have dust nibs and could just stop without polishing. Don't bother - just go to 6+ coats, and then use the technique Mike shows here and it'll be perfect.

@alexmcallister492 4 месяца назад

Mike thankyou so much for this video I’m not working on boats but with varnishes and need them polishing to a show shine . Best regards from the UK 😊

@warrenwalker8170 Год назад

excellent all the insights are wonderful

@jimlucier7968 Год назад

Great work. Love the detailed instructions.

@tastycake1969 6 месяцев назад

GREAT video. Thank you

@bobwallace6812 6 месяцев назад

Great video. Thank you.

@Shopdog1550 Год назад

Thanks for this great video. Super helpful to me!

@sunrisesandsunsets7553 2 месяца назад

So that's how it's done ✅👍😮

@luisgcasiquet 7 месяцев назад

Great video!! Thanks!!

@stevesanderson524 Год назад

Awesome series! Thank you! No Century's? My dad had a 1958 Arabian- 30 made like 6 survive.

@maciejtrybilo Месяц назад

Not that I know half the stuff you do, but wouldn't a trigger that regulates speed make it a bit more convenient? I've gone for a battery powered Dewalt polisher and the trigger works very nicely.

@MikeGreenStudioWorks 16 дней назад

This is a vareable speed buffer.

@richiem4199 Месяц назад

Thanks Mike. The wife and I just had 2 questions. 1- Mike Costner? 2- what is with the sign “no spitting in the boats”? Wouldn’t that go without saying?

@MikeGreenStudioWorks 16 дней назад

Not sure about question 1. Those signs are replicas of signs that were hanging in the Original Chris Craft factory. I guess there was a problem and needed signs.

@abdulkkhan5095 3 месяца назад

An expert

@raymondmenard5444 10 месяцев назад

Wow ! that's super impressive. Is it possible to use the same products and technique to buff a wooden cabinet (furniture) ? Thank's for sharing this video, it's very informative.

@MikeGreenStudioWorks 10 месяцев назад

Yes, absolutely, that is the process for some pianos.

@raymondmenard5444 10 месяцев назад

@@MikeGreenStudioWorks Geez Mike, thank you so much for the reply, not every You Tubers reply to comments or questions. To be more precise i am in the process of restoring a 1937 RCA-Victor Vaccum Tube radio console. It took me 8 months to learn basic tube electronics and completely re do the chassis. I've been working on the cabinet for 3 weeks now and did the usual stripping, sanding, grain filling and re sanding and staining before applying the varnish. For this project i didn't see myself doing a shellac french polish finish because of all the mouldings and right angles everywhere. I couldn't see being able to use the ''Rubber'' evenly on those parts. Since i don't have a proper spray booth and have to work outside i also eliminated spraying some sort of top coat. So my only other option was varnish. I realize now i could have done much better using a roller and foam brush as you demonstrated, but i wasn't aware of the technique. So i'm thinking of doing a wet sanding first and proceed with compound and polisher afterwards. I've seen a few restorers use wet sanding with amazing results on radio cabinets, but they all started with a sprayed top coat, so this is my concern, i mean can i do a wet sanding over an oil base varnish, would it ruin the finish ? Anyway i subscribed to your channel even though i don't own a boat. This looks too interesting to pass, at least the way you explain everything . Thank's for taking the time to make these videos and share them with the community. Well done !

@MikeGreenStudioWorks 10 месяцев назад

@@raymondmenard5444 I'm pretty sure you can wet sand, we use a tounge oil varnish that would be about the same as a standard oil base. Give it a try and let us know how it comes out. Thanks for watching!

@raymondmenard5444 10 месяцев назад

@@MikeGreenStudioWorks I'm absolutely going to try it, right after this last coat cures good n hard. Thank's for your help Mike. I'll let you know for sure wether i succeed or fail miserably 🙂

@timbutler5886 5 месяцев назад

Wonderful demonstration. I have a 55 CC Cruser with varnished decks that run up against varnished rails, and cormers. I have avoided polishing because I dont know what technique can be used to polish is a corner? Do you have any recommendations for that? Thank you !

@MikeGreenStudioWorks 5 месяцев назад

We have a 3 inch buffing wheel that we use. 3M makes the littel pads and adapter that you may put in a drill.

@SweatLaserXP 2 месяца назад

What's the reason for doing these steps, vs. just doing 2 final coats with a 400 wet sand inbetween?

@MikeGreenStudioWorks 2 месяца назад

When the varnish shrinks you will see the scratch marks for 400 grit.

@SweatLaserXP 2 месяца назад

@@MikeGreenStudioWorks what kind of varnish are you using? More importantly, are you doing this as a yearly procedure on this boat, or is this something you're doing after a strip job?

@SweatLaserXP 2 месяца назад

@@MikeGreenStudioWorks By the way you did a beautiful job on the boat regardless. Just trying to pick your brain.

@edwardklein9146 10 месяцев назад

I liked your video on buffing a varnished wood boat. A few questions: you start by saying the varnished wood had already been sanded with 320 grit, followed by 1500 grit. I may have missed some details here, but please elaborate on exactly what grit paper you used, in sequence. Do you bother with 3000 grit? I am trying to get a "show quality" finish on a wood veneer dashboard for my car and am not satisfied with the finish so far. Please advise. Thank you. Very well done video.

@MikeGreenStudioWorks 10 месяцев назад

So we sand every 5 coats with 320 to get the varnish flat over the process of aplling 15 coats. We then apply the name and numbers in usually gold leaf and then apply 5 coats over it. We then sand with 1500 grit wet and then 2000 grit wet. Then we buff back to a shine. No need to sand with 3000 as the buffing will get out the 2000 grit scratches. Hope this helps.

@tomemling6880 Год назад

Mike, the final step following polishing includes adding the stripes with tape. The painted stripes are applied "on top of" the varnish (not protected by the varnish like the lettering and MC numbers), is that correct?

@MikeGreenStudioWorks Год назад

Yes, the paint we use is a marine enamel and made to be outside so no UV protection needed.

@carlprindle4440 Год назад

Great video, Mike! Any tips on how to address a scuff where the varnish is still intact, just dulled? Sand and polish like this or is there a better approach?

@MikeGreenStudioWorks Год назад

You could try it, we have done that before. If it is deep or just below the surface you can scuff it up and add layers of varnish, wet sand flat and then buff it back to a shine.

@carlprindle4440 Год назад

@@MikeGreenStudioWorks Thank you - will do! Btw, tried to get to your online store and got an SSL error. I’ll try again in a bit. Thanks for all you do!

@huntdowse9727 Год назад

I restore rowing shells and haven’t wet sanded varnish because the hardness of the varnish seemed too soft to do so. What varnish do you use that allows you to wet sand and buff?

@MikeGreenStudioWorks Год назад

We use Pettit Captians varnish. We apply the last coats one each day for 3 days and then let it sit and dry for about a week before wet sanding.

@46custom Год назад

Hey Mike, good stuff here. I see that you are using both a white and charcoal foam pad. What is the difference and can you share the part numbers?

@MikeGreenStudioWorks Год назад

Good to hear from you. You can find the stuff you need on my website www.mgstudioworks.com/ The white pad is used for cutting the finish first and the black pad is softer then the white.

@46custom Год назад

@@MikeGreenStudioWorks Cool. I just ordered a few things.

@cops1987 7 месяцев назад

How long is recommend to wait between the last cost of varnish and buffing process?

@MikeGreenStudioWorks 7 месяцев назад

We like to wait at least 3 days if your in about 65 degrees. A week is even better.

@MLSV-kx7nl 3 месяца назад

Why do I see that wood as if it had been painted brown?

@MikeGreenStudioWorks 2 месяца назад

Lighting, its correct red mahogany.

@otm646 3 месяца назад

Not sanding every layer is a serious mistake, that's a big part of why you are struggling to get the final finish you're after.

@StarshipTrooper2050 2 месяца назад

Sign on wall: no spitting in boats? Seriously? People need to be told this?

@MikeGreenStudioWorks 2 месяца назад

Yes, those signs are replicas of signs they had at the Chris Craft factory so I think there was a problem but not here in the shop.

@rha4374 Год назад

I'm sick to death of all the best products that you are using, especially when good o,l America. I'm in Scotland and I cannot find any suppliers for any 3m masking tape, Maguire's products, or any good quality materials to prep my boat. We have an ASDA which is supposed to be a Walmart that has Fek all. Other places are "trade " only or if you're connected. ! It's taken me several weeks just to get wet n dry standard paper that'll probably tear soggy style. You guys have practically everything on hand. Therefore all these "helpful" vids just frustrate me.

@MikeGreenStudioWorks 11 месяцев назад

Sorry for your frustrations.