Follow these easy steps to replace a High-Pressure Valve (Halkey Roberts Valve):
TO REPLACE A HIGH-PRESSURE VALVE YOU WILL NEED: PAPER TOWELS, WATER WITH DISH SOAP, AND AN H3 VALVE WRENCH
INFLATE THE PRODUCT.
SPRAY THE VALVE TO IDENTIFY ANY LEAKS
A LEAK IN THE VALVE WILL CREATE BUBBLES
BEFORE REPLACING THE VALVE, MAKE SURE IT’S PROPERLY CLOSED. IF IT’S SLIGHTLY OPEN IT CAN CREATE LEAKS AND TIGHTENING IT CAN FIX THE PROBLEM
AFTER CLOSING THE VALVE, SPRAY SOME SOAPY WATER ON AND AROUND IT TO IDENTIFY ANY POSSIBLE LEAKS
IF THE LEAK PERSISTS, THE VALVE NEEDS TO BE REPLACED. USE THE WRENCH TO OPEN THE VALVE AND REMOVE IT.
MAKE SURE THE NEW VALVE IS CLEAN, AND WITHOUT ANY GRASS, SEAWEED, OR DEBRIS
BEFORE PLACING THE NEW VALVE, MAKE SURE THE MOUNTING POINT IS CLEAN AND DRY
ALIGN THE MOUNTING POINT WITH THE HIGH-PRESSURE VALVE AND USE THE WRENCH TO SECURE IT
INFLATE THE PRODUCT TO CONFIRM THERE IS NO LONGER A LEAK
SPRAY THE VALVE WITH SOAPY WATER AND LOOK FOR ANY BUBBLES
PUT THE VALVE CAP ON, AND THE PRODUCT IS READY TO BE USED
---------------------------------------
Follow us on:
WEB ‣ www.aquaglide.com
INSTAGRAM ‣ / aquaglide
FACEBOOK ‣ / aquaglide
PINTEREST ‣ / aquaglide
TWITTER ‣ / aquaglide
23 сен 2018
