How To Watch & Control Your CCTV (+other HDMI Devices) On Multiple TVs 

The connection at the back, although it uses a rj45 connection, it's not Ethernet standards so the 100m rule isn't applicable here. Also, In terms of power upto 100m of cable, hikvision can send power and data upto 300m when set to extend mode.

Not via this , this changes the display outputs , but does not interact with the CCTV camera display directly

these ones are direct cabled , but will check on full IP setup they might be working on

You can get them. I've used them. The quality wasnt that great. Probably because it was only about £100.

@@AsadMulla indeed you can, I use quite a lot. Was intrigued to see if this company produced one as this product seems well built

@@SteveColeUK ok. Yeah I've used HD Anywhere and the quality is good. Which brand so you use for HDMI over IP?

@@SteveColeUK could you post a link to the one you use buddy

Looks like you haven't ticked over write on hard drive recordings.

I have overwrite on tho.

when you format it , it should show normal and then tell you remaining storage % left , is this not happening ?

@@DVSLTD when I format it says hard drive is normal when I go to playback it says hard drive not formatted, So I go and check the hard drive status and it says it’s broken, Rebooting the system will make me re format the hard drive

@@watermelon7916 HDD seems faulty to be honest ☹

NEC ones, but these are older and we have better more cost effective ones now 😊

Lol, you didn't see the control part? Or you closed the video too early

@@owolabitaofeeqowodunni8609 Lol, I watched it to the end. They never showed how to control the CCTV remotely, only how to control the matrix switcher.

It's not ip so it won't work over WiFi. You cant plug the transmitter into your router and connect the receiver into a switch port. It's proprietary. Although it's an RJ45 cable it's not IP. The 2 are not the same. Think of it like using cat5e or cat6 cable with baluns instead of coax for analogue CCTV

That’s great , the same as anything in life there is cheap and then pro professional , you are not in this industry I presume so are able to use what you can / need

This is sadly true for all HDMI over Cat/Fibre/IP distribution. The link nearly always costs more than the source and display at each end. It does my head in.