How To: Whirlpool/KitchenAid/Maytag Dishwasher Detergent Dispenser W10861000

Подписаться 233 тыс.

Просмотров 89 тыс.

50% 1

How To Replace: Whirlpool/KitchenAid/Maytag Detergent Dispenser W10861000 www.appliancep...
Symptoms: parts have failed, not dispensing properly.
Tools: Torx 15 driver, flathead screwdriver, putty knife.
This Whirlpool/KitchenAid/Maytag made Dishwasher Detergent Dispenser replaces the following older part numbers on Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Sears, Kenmore Dishwashers: W10620296, W10620298.
Buy the new Dishwasher Detergent Dispenser W10861000 here: www.appliancep...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepa.... We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
DIY Repair Group: / fixmystuff
Twitter: / applpartspros

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 92

@KatieRose21282 Год назад

Thank you for this video. I was able to change out the soap dispenser myself. Your instructions were clear and easy to follow with step by step explanations. You saved me $250 for hiring someone.

@JohnArnoldPhotography Год назад

Clear instructions made it so easy to install. Just be patient when bending the tabs to get the old one out. You have to just keep working the tabs to unclip the unit. Thank so much. Saved me $$$

@toddsilvia6952 Год назад

You saved me a lot of stress. Once I viewed this, I found the trick was adding the puddy knife to keep the clip from relocking. Just a minor cut on my hand. Wear Goves everyone.

@appliancepartspros Год назад

Glad we were able to assist you with your repair!

@sheilagwizdak5317 2 года назад

Thank you so much for this video! Your instructions were very easy to follow and it was a fairly easy job. That said, I did find out why you were wearing gloves! One of those evil tabs got me as I was pushing the old unit through.

@deneebex9760 11 месяцев назад

Just got done installing the new soap dispenser. I used paper clips to keep tabs from clicking back in. Thanks for the clear instructions!

@appliancepartspros 11 месяцев назад

Glad we were able to assist you. If there is anything else we can help you with please let us know.

@Ronald-rl6hx 21 день назад

GREAT VIDEO! I might add if you're having trouble removing unit from the 8 tabs, you can cut up 3/4" x 1 1'2" shims ( roofing flashing works great ) and lift tab up with screw driver and slid shim in opening )

@appliancepartspros 19 дней назад

Thank you for the tips!

@lauraharris8788 2 года назад

The instructions...small tab to release wiring harness and metal clip instructions were a life saver! Thanks so much!

@arothmanmusic Месяц назад

Thanks for this! Someone put dish soap into the rinse agent dispenser and we weren't sure how we were going to clean it out so we could run the washer again without making a mess. Taking the assembly out to clean it is simpler than I would have expected!

@appliancepartspros Месяц назад

You're welcome!

@Supremebean303 9 месяцев назад

Thank you, young Albert Einstein.

@appliancepartspros 9 месяцев назад

You are welcome.

@lengilardi1795 Год назад

Great video easy fix but a little time consuming not too hard. Thanks so much 😅

@ChristopherMarlowe 6 месяцев назад

thank you for the detailed video. this fixed everything wrong with our dishwasher. the only tricky part is the metal clips. it's a very tight fit.

@appliancepartspros 6 месяцев назад

You are very welcome! If there is anything we can help you with in the future please let us know.

@billlane9251 2 года назад

Thank you for a clear, concise explanation. Saved me $$$.

@PhilFXPhoenix Год назад

Thanks much. Have to replace this on my dishwasher and while getting the part was easy it was not clear to me at all on exactly how to do the replacement. Your video was concise and very clear.

@appliancepartspros Год назад

Good luck with your repair. If we can help you with anything let us know.

@claudebornel982 Год назад

I just finished replacing the soap dispenser in my dishwasher now and it seems to be working really well. Thank you so very much! 🙏❤️🙏❤️🙏

@appliancepartspros Год назад

Glad we could help you out!

@ryekell Год назад

Wear gloves! I was not and when the old dispenser finally popped out my finger tip went through the piece of metal clipping that was holding it in.

@evanadair Год назад

100% this. Should have listened as I’m leaving ER now after getting stitches. 😂

@VP-vx5ll 6 месяцев назад

Soft

@blackcat4040 Месяц назад

Lol slit my thumb right open pushing the old dispenser out and read this comment right after. 😂

@ddellwo 10 месяцев назад

Excellent video - ordered the part and just finished the job! The hardest part was futzing with those little metal tabs - ended up using a series of small screwdrivers to hold them open while I gradually worked the unit out of the inner door. Start to finish, MAYBE a half hour - including putting all my tools away……..👍

@appliancepartspros 10 месяцев назад

Glad you were able to complete your repair! If there is anything we can help you with in the future please let us know.

@stevekarthauser4363 7 месяцев назад

It was a very easy install! I have the same dish washer but my wiring was a little different but that didn't really change anything. Make sure you push really hard to get the new unit to clip into the tabs.

@appliancepartspros 7 месяцев назад

Glad you were able to complete your repair! If there is anything we can help you with in the future please let us know.

@susiedawson8547 10 месяцев назад

Thank you! I had to fix my dishwasher tonight and your video was invaluable. Thank you!

@appliancepartspros 10 месяцев назад

Glad we were able to assist you. If there is anything we can help you with in the future please let us know.

@chrissant1699 Год назад

Short, sweet, and great detail! Thank you!

@appliancepartspros Год назад

You are very welcome!

@gregbrock6111 7 месяцев назад

Easy video, perfect to follow saved me so much money.

@appliancepartspros 7 месяцев назад

Glad we were able to help you out. If there is anything we can help you with in the future please let us know.

@ChillDfect 2 года назад

This also worked for my little Frigidaire. Thank you!

@billsherk9198 2 месяца назад

Thanks,you made it so simple

@appliancepartspros 2 месяца назад

You're welcome!

@brianhagen8572 Год назад

Worked like a charm, thanks!

@dustinblotz8894 Год назад

Is there a way to just replace the gasket? Ours works, just leaks.

@smileysgarage8899 2 месяца назад

thorough and helpful teaching

@appliancepartspros 2 месяца назад

Thank you!

@badfinger524 Месяц назад

Thank you very much. That was excellent.

@appliancepartspros Месяц назад

You're welcome

@kmak6627 Год назад

Awesome tutorial, saved me hours

@memyselfandi9684 2 года назад

Wow you just help me I've spent four days trying to figure out how this dang thing goes in.. you don't by chance know how to put the spring back in the soap dispenser? I just found that lighting inside it and now the soap dispenser door won't open to release the soap

@alanquik 10 месяцев назад

Amazing video, so clear. Thank you 🙏 🙏

@appliancepartspros 10 месяцев назад

You are welcome!

@warhouse1 2 года назад

Thanks for the video. I got most of the way through but I'm stumped now. My old detergent dispenser looks identical to my new one as well as the one in the video except mine didn't have two wires going to the solinoid, it was only one and it had this 4-pin looking hook up going to it. My new one has two small copper connectors with a hole in each one. How do I hook this one up? There's two wires that are attached to my door handle, too, that look like they would go on it. Is that what I use?

@lauraharrop6708 2 года назад

Hi did you get a response on this? I’ve got the same thing

@warhouse1 2 года назад

@@lauraharrop6708 I never did. I paid attention to where each wire would connect and cut off the connector to expose the wires and twisted them through and around those flat pins

@chucko83 Год назад

I cant get the new part to snap back into place. The top and left side clips are in place but i cant get the right side and bottom to clip in. Any tipa for that? I bet this is whats causing others to get leaks at the bottom

@appliancepartspros Год назад

What is your model number of the dishwasher? Is it just that the part is too big and that is why you can't get it to clip in?

@chucko83 Год назад

@appliancepartspros it looks identical to the one in your video (purchased in 2015). I figured it out though. I ended up pressing the tabs in with a flathead screwdriver while pressing on the dispenser from the inside. Very tight fit. First wash was a success! Thanks for your video!

@appliancepartspros Год назад

Glad you were able to figure it out! If you need more help in the future please let us know!

@johncarson804 7 месяцев назад

you can clearly see in the video his is not filly clipped in either.the side clip and bottom clips not latched , there is a gap along the bottom of the cup

@wvgoodoleboy5134 2 года назад

This looks really easy . I'm about to go try!

@junfabi1 2 года назад

Before you condemn the whole part,check first for mechanical reason that the door won't open or close, like soap deposit etc.

@romaineknepp6620 Год назад

Thank you for this video!!

@ohger1 Год назад

These are junk. Ours arrived with the run LED out (the completed LED works), and now the dispenser is out. It occasionally goes completely dead where the keypad and display go out. We use ours maybe once every two weeks (empty nesters) and this this has been nothing but trouble in the year and a half we've had it. Even our crappy Bosch we had before lasted 8 years.

@melben4358 5 месяцев назад

I just watched this video to take out the dispenser. My daughter accidentally put dawn in the dispenser. I got it all apart ans rinsed out but when I replaced the door and started a cycle, I noticed a leak coming from the right bottom corner. I removed everything again and replaced and still there is a leak. Can you give me some tips as to why this would happen? Thanks!

@appliancepartspros 5 месяцев назад

What is the model number of your dishwasher?

@jaysmith6013 Год назад

Thank you!

@woolleysusan6330 Год назад

Why can't I just replace the spring? It seems wasteful to replace the whole unit.

@lindseyclark6460 Год назад

I discovered today that you can pop off the sliding detergent door, clean off caked detergent residue, realign the spring in the holes, and pop it back on (if yours was the same issue as mine-- residue caused it to stop working and then the spring popped out when I tried fixing it)

@Flynnjk Год назад

Followed as show and it was easy. Unfortunately I ran a load and now I have water leaking from the bottom of the door? What do you recommend?

@johncarson804 7 месяцев назад

you can clearly see in the video his is not filly clipped in either.the side clip and bottom clips not latched , there is a gap along the bottom of the cup

@SusanClark-fx5nx 3 месяца назад

How to install the slider lid to the dispenser? Mine popped off.

@appliancepartspros 3 месяца назад

What is your model number?

@Mirahverl 2 года назад

Great video...thank you!

@wj74 2 года назад

Matt the legend!

@metfan1638 Год назад

Good job! Great vid!

@auburnelectrologyskincare1167 Год назад

Why does it say pre wash what about soap for the regular wash? I am So confused. My old one had two spaces

@appliancepartspros Год назад

What is your model number?

@realkoko-loco 8 месяцев назад

On my dishwasher, they’re not screws!! They’re like rivets with circular centers -how do I remove them?!

@appliancepartspros 8 месяцев назад

What is the model number of your dishwasher?

@johncarson804 7 месяцев назад

T-15 torx tool

@realkoko-loco 7 месяцев назад

@@johncarson804 Thanks-I got it. It’s all better now 😉

@JoeTheViewer Год назад

See if you can set up a donations tab on RU-vid so we can show our appreciation.

@alexisnovotny4993 21 день назад

Can I just repair the soap dispenser door? I don’t think I need to replace the whole thing.

@appliancepartspros 19 дней назад

What is your model number?

@alexisnovotny4993 19 дней назад

@@appliancepartspros WDT750SAHZ0

@appliancepartspros 19 дней назад

Thank you. Unfortunately, the manufacturer does not sell the dispenser door separately. You will have to replace the whole dispenser if the door has failed. That part number is W10861000. You can place the order on the website, or you can call us at 1-877-477-7278 to place the order over the phone.

@alexisnovotny4993 19 дней назад

@@appliancepartspros I don’t think I need any new parts just need to snap stuff back together and make sure the spring mechanism is put back together properly. I thought I had it but the door doesn’t slide back all the way now. If I could just see the schematics of how everything is put together that might save me $100.

@appliancepartspros 19 дней назад

I'm sorry, the manufacture has not provided a schematic for that part.

@KickButtMarketing 2 года назад

Thx for the info and tips. Made it EZ.

@RoastBeefQueefSniffer Год назад

Anyone else have issues with leaking from the bottom after doing this?

@appliancepartspros Год назад

When you say leaking from the bottom are you referring to the bottom of the dispenser or where is it leaking?

@RoastBeefQueefSniffer Год назад

@@appliancepartspros the door itself. The bottom of it drips onto the lower half of the dishwasher. Everything is lined up, seals etc still look and feel good. Everything lined up as I put it back together. Thank you for responding though. You've already saved me 500 bucks.

@appliancepartspros Год назад

What is your model number?