No video :(

How To: Whirlpool/KitchenAid/Maytag Freezer Drawer Slide WPW10120018

Подписаться 230 тыс.

Просмотров 48 тыс.

50% 1

How To Replace: Whirlpool/KitchenAid/Maytag Freezer Drawer Slide WPW10120018 www.appliancepa...
Symptoms: not closing properly allowing warm air in and frost to build up.
Tools: 1/4" nut driver, power drill with 1/8" drill bit, flathead screwdriver, rivet gun with 1/8" rivet.
This Whirlpool/KitchenAid/Maytag made Refrigerator Freezer Drawer Slide replaces the following older part numbers on Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Sears, and Kenmore Refrigerators: W10120018, W10488000, 67006607, B005AR6Z48, B00QZPTI8E, B00L4GGK8K.
Buy the new Refrigerator Freezer Drawer Slide WPW10120018 here: www.appliancepa...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepa.... We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 26

@johnoconnor5581 Год назад

I watch a lot of videos for education and pleasure and as repair videos go, this should get an award. Very professionally done in step by step order with a list of required tools at the beginning. This video turned a relatively complex component replacement into an easy task. I never could have properly completed this task without this video

@karunald 2 месяца назад

The engineers for Whirlpool/KitchenAid purposefully made this SO hard. Can't even remove a drawer for cleaning without spending an hour mangling the 2 'tabs. BTW - my $4k Kitchenaid for 5 years still doesn't make ice.

@appliancepartspros 2 месяца назад

I understand your frustration. If you need assistance or have questions, just let us know!

@robertmankin765 Год назад

Thank you you made it an easy task

@matlachaboatridesandrental2841 4 года назад

Great video on replacement. I ordered full slide assembly. My Door Brackets on original with screws 23 inch on center were different than replacement with screws 24 inch on center BUT the old was interchangeable the new. Hint - Do not discard any old parts until finished as you may need old but useable features.

@nenesgarage7103 6 месяцев назад

Thank you for this great video. Do you recommend replacing both glides at the same time? I replaced my right hand side and the door seems to be tilted to the left. I don’t know if it’s because my left glide is the original ? Thank you in advance!

@appliancepartspros 6 месяцев назад

You are welcome. If the drawer is tilted to the left then we would recommend replacing that glide as well and see if that would help fix the issue you have.

@Archrynut 9 месяцев назад

Thank you, thank you for the help

@appliancepartspros 9 месяцев назад

You are very welcome. Glad we were able to help you. If we can help you in the future please let us know.

@Timetryp 5 лет назад

The freezer drawer will not come out. Something is causing the left hand rail to stop before being fully extended. I cannot remove the upper or lower baskets and have no access to any screws. How does one deal with a malfunctioning slide rail?

@jojorofo 3 года назад

Did you ever find a solution to this?

@MrSamane22 Год назад

Hey, I have the same problem, I can only open my drawer to 11inches. I can't remove any of the metal baskets. Did you find a solution?

@mitchvass4498 Месяц назад

Thank you for your video, I replaced the slide no problem. Although, I noticed on the right side where the gear goes, in the rear, the teeth rack on the frame of the fridge has three teeth knocked out. Is there a kit for repair for this? Because what happens is: if you pull freezer door on the left of the handle. It cocks out first. because the gears don't pull the left side. If I pull from the center its not bad. Is there A kit to repair the teeth rack built onto the fridge? thank you.

@appliancepartspros Месяц назад

What is your model number?

@mitchvass4498 Месяц назад

@@appliancepartspros GB2FHDXWQO2 Wow thanks for the reply.

@appliancepartspros Месяц назад

Thank you. The part number is W11489994. You can place the order through our website, or you can call us at 1-877-477-7278 to place the order over the phone.

@mitchvass4498 Месяц назад

@@appliancepartspros Ok thank you very much just what I need. You are great. Mitchell

@appliancepartspros Месяц назад

You're welcome!

@heatherjudson3601 Год назад

What if the drawer won't open at all? It is not frozen. It has been unplugged for over 50 hours.

@gatorr4life Год назад

Same here. Unplugged it to defrost and clean it up a bit. Took out the bottom tray and that was it. Cleaned the freezer then reinserted the tray. Now it all of a sudden won’t upon all the way. nobody on these how to videos will answer me. Lol some of these videos are over 3 years old. 😕