How To: Whirlpool/KitchenAid/Maytag Motor Brush Holder 4162546

Подписаться 227 тыс.

Просмотров 52 тыс.

50% 1

How To Replace: Whirlpool/KitchenAid/Maytag Motor Brush Holder 4162546 www.appliancepartspros.com/whi...
Symptoms: damaged and not allowing brush to contact armature; motor is not coming on.
Tools: flathead screwdriver, rubber hammer, punch, Phillips screwdriver, towels, ratchet, pliers, nut driver, piece of wood, wrench.
Optional: Planetary grease WP4176597.
This Whirlpool/KitchenAid/Maytag made Mixer Motor Brush Holder replaces the following older part numbers on Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Sears and Kenmore Mixers: 557640.
Buy the new Mixer Motor Brush Holder 4162546 here: www.appliancepartspros.com/whi...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepartspros.com/. We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros

Хобби

Опубликовано:

17 июл 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@nathanschleifer9422 2 года назад

This is an incredible video. Extremely precise, correct and helpful at each step of disassembly and assembly. Thanks!

@screammember Год назад

Best kitchen aid repair videos by far, super clear and straight forward explanation of every single detail! thanks !

@joefish1498 4 года назад

You're video's always make me laugh. You say it's not difficult. Not difficult for who? If you have viewers that require instructions to remove the beater and bowl they should be advised not to go near this project. That being said it is the best video I've seen on this machine. With this video alone , and a little know how, you can service every part on this machine. Well done.

@domsusefulstuff 5 лет назад

Thank you sooooo much! I bought new brushes but the brush holders had some grit stuck in them that was hampering the movement. I followed your instructions and was able to take them out, clean them and put in the new ones. Now I have my +25 year-old Kitchenaid back and I'm so happy!

@lauriejo5610 7 лет назад

I really like this guys instructions. NO wasted words!! Love it.

@appliancepartspros 7 лет назад

Glad the video helped you get the mixer fixed!

@mattbaker6782 4 года назад

Very thorough and got a good Pace thanks I appreciate it

@nelliyarseva7657 2 года назад

Огромное спасибо! Это самый лучший ролик по данной теме, потрясающее качество сьемки и подробнейшее содержание.

@RichardDDixon Год назад

Awesome. I am good at figuring things out, but some details I would have missed. Thanks

@CarlosRRT 3 года назад

Thank you, very well explained!

@gizzyguzzi 5 месяцев назад

This is a good video for complete disassembly. I don't think it's necessary to pull the planetary and break the two halves of the machine apart to get to the brush holders. You can just go in from the rear end and pull the armature. You can reach the coil wires with needle nose pliers and remove the coil, all from the rear.

@appliancepartspros 5 месяцев назад

Thank you for the tips. Some models you may not be able to do that. Our videos are just to help give a general idea on how to do the repair.

@julioacosta5592 8 лет назад

Excellent instructions.

@appliancepartspros 8 лет назад

Thanks, glad the video helped you get the mixer fixed!

@showgirlsaroundtheworldada4484 4 года назад

Amazing vlog

@gabrieleteich4046 7 лет назад

Thank you thank you thank you! It's all fixed! Great video, great help.

@appliancepartspros 7 лет назад

Glad the video helped you get the mixer fixed!

@2010stoof 6 лет назад

Do the bowl lift mechanism rails need to be greased?

@heszabo4 5 лет назад

Thank you for the video! I received a ksm90 model that did not turn on. After replacing the motor brush assembly, I was able to get power, but only when the lever is on the off position. The motor doesn't work when the lever is on any of the actual speeds. Any idea where I went wrong?

@heszabo4 5 лет назад

I put part of the speed control lever back in backwards in case anyone comes across this same problem...

@colindonahue9937 6 лет назад

I have this exact mixer. When mixing dough speed 6 thru 10 Dosent change when before it use to change. Do you think the motor is going bad? Thanks.....

@appliancepartspros 6 лет назад

We'd be happy to help you figure out what's going on with that! We offer free technical advice and diagnosis. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We will need your model number to give you accurate advice, which you can locate using this tool on our website: www.appliancepartspros.com/modelnumber_locator.aspx

@messykitchen007 7 лет назад

May you know what's wrong with my heavy duty? When I put the plug in, it doesn't turn but it makes sounds... when I turn it on it only goes fast.

@appliancepartspros 7 лет назад

Without knowing what you have, I would suggest posting the problem along with the appliance model number on our repair forum and the techs can help you troubleshoot the problem. forum.appliancepartspros.com/

@francescomarini774 7 лет назад

Hello, by mistake I used my 110v Kitchenaid in a 220v. Now its not working anymore. Do you think that I will need to change the motor? Thanks for your help

@appliancepartspros 7 лет назад

You would have to test every thing and find the part that failed.

@EternaluBUrgess 5 лет назад

I have one speed that work on my mixer when I open the back up the wire don't look like your wiring on the one you doing I have wire nuts on mine how can I have it fix?

@gizzyguzzi 5 месяцев назад

sounds like a K5a. pre solid state

@catd6235 7 лет назад

My speed at 8 to 10 is the same speed, any suggestion?

@appliancepartspros 7 лет назад

@markhodges5225 2 года назад

One of my brushes is stuck in the mixer and won't come out. Suggestions?

@squirt3655 7 лет назад

It's an excellent instructional video but seems as if you have to take the whole mixer apart to get to the motor brush holder. It is a very tedious job

@gizzyguzzi 5 месяцев назад

I don't see why it is necessary to take the hold machine apart to do this.

@catherinetoth4719 6 лет назад

Hello. What do I do if I removed one of the brushes without marking it's orientation?

@appliancepartspros 6 лет назад

You can also put the brushes back in based on where the little notch is cut out, as explained at 12:50 and 13:20.

@appliancepartspros 6 лет назад

It's also demonstrated at 27:20 and 27:51

@gricelserrano5383 3 года назад

Mine buzzes when it is plugged in. Any ideas why?

@apostolosziangalos6487 8 лет назад

ευχαριστο

@appliancepartspros 8 лет назад

χαρούμε να σας άρεσε το βίντεο!

@ElGoogKO Год назад

Based on the huge price of a kitchenaid mixer and reputation of it, the fact that it still uses a brush motor is appalling and outright scam. Buyers believe they receive a great product when in fact they receive a severely outdated one, but nicely polished on the outside and using the image made half a century ago, when that product was first made.

@gizzyguzzi 5 месяцев назад

I'd rather have a serviceable motor like this. But they do make a brushless motor that you can just throw the whole motor assembly away. I'd rather buy an old model, they are serviceable indefinitely.