How to Wire and Install a Ceiling Fan With Remote Control/Ceiling Light Fixture Removal.

Подписаться 15 тыс.

Просмотров 239 тыс.

50% 1

A step by step guide on how to remove a ceiling light fixture , wire and install a ceiling fan with remote control (a 54-inch Hampton Bay--Fanelee). This video will walk through the safety measures, including how to shut off the circuit breaker, use a multi-meter, and how to safely remove a ceiling light fixture before wiring and installing a ceiling fan.
If you found this content meaningful and useful, please support this channel by subscribing and liking the video. Thanks!
Other similar ceiling fan products for your research:
Prominence Home 51650-01 Lorelai Ceiling Fan, 52, Pewter
amzn.to/30xFoIr
Hunter Oceana Ceiling Fan with LED Lights and Wall Control , 52", Noble Bronze
amzn.to/30mDCtu
Westinghouse Lighting 7224200 Comet Indoor Ceiling Fan with Light, Matte Black
amzn.to/3mVlOxb
Check out my other videos:
How to Remove, Wire, and Replace a Garbage Disposal: InSinkErator Evolution Select Plus
• How to Remove, Wire, a...
DIY Over the Range Microwave Oven Removal/Under Cabinet Range Hood Installation (2020)-- • DIY Over the Range Mic...
How to Convert a Gas Grill Into a Charcoal Grill--Weber Spirit--Save $$$ (2020)
-- • How to Convert a Gas G...
LED Ceiling Light Fixture Installation-- • LED Ceiling Light Fixt...
Exhaust Vent Fan Cleaning and Removal Step by Step (Moisture Sensor)
• How to Remove and Re-i...

Хобби

Опубликовано:

9 окт 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@serrysingh 2 года назад

*Great unit that’s easy to install and use. It’s relatively quiet compared to window units and **Fastly.Cool** , and it cools down our whole living room, side room and bathroom; which is a large space for any unit to cool.*

@diypotentials 2 года назад

Thanks!

@jam0to9 6 месяцев назад

Great video. One observation I’d like to add. I had a White, Black, Red, and Green (ground) coming out of the ceiling socket with a three switch light bank at the wall. The Fan has a Black, White, and Green wire. If you have a multi-light switch outlet, remove the cover to identify which switch connects to the Red and which to the Black wire. Knowing the status of your home wire installation will save a lot of installation headaches.

@diypotentials 6 месяцев назад

Thank you for sharing! Happy new year!

@parrotheadstx 10 месяцев назад

You are an excellent instructor. Thank you very much for creating this video.

@diypotentials 10 месяцев назад

Thank you. I’m glad it was helpful.

@Mav... Год назад

Well done. You made that look so easy. I doubt it will go that well for me but I have a great example. Thank you.

@diypotentials Год назад

Best of luck on the install. You can do it. Thanks!

@huellaslatinas 23 дня назад

Excellent . Very Detail.... Muy bien esplicado !

@pcm7315 Год назад

One of the more thorough demonstrations of remote ceiling fan installation.

@diypotentials Год назад

Thanks!

@ClarenceMcIntosh-ym2pl 11 месяцев назад

Looks great, and with a brighter bulb installed that’s all the light you need. ru-vid.comUgkxWF88GpljEn-0o34vtLFazEQ5h5Q33SjU As far as ease of installation- this was my first ceiling fan and it took about 3 hours because I had no idea what I was doing and also it’s helpful to have a second set of hands and a magnetic drill bit. Works great.

@leonjones4005 11 месяцев назад

Great job explaining

@mookiemisc Год назад

Thank you so much! This was by far the best video I could find about installing with a remote. The manufacturer instructions were terrible. :)

@diypotentials Год назад

Thanks so much for the nice comment. I’m glad it was helpful. Best wishes!

@jermainedeleon1787 Год назад

This was PERFECT! THANK YOU!!!! 💪🏾

@diypotentials Год назад

Thank you!

@Only1MsClo Год назад

This tutorial really helped me. Thank you so much for taking the time to make it.

@diypotentials Год назад

So glad it was helpful. Thank you. Happy New Year!

@jorgeluistamayadominguez2638 Год назад

@@diypotentials Hi, thanks for the video, i have a question: what doing now the switch you had for the lamp?, Does it only turn on the light or does it turn on the whole fan as well?

@diypotentials Год назад

@@jorgeluistamayadominguez2638 it turns on the whole fan, but you then use the remote control to turn the light and fan off or on.

@prabkt8716 2 года назад

So, what is your wall switch ? Is it a dimmer switch or a regular switch ? I have a dimmer switch and would like to know if I can connect the blue wire (light) from the fan, remote blue wire and the red wire from ceiling all three together ? And have the black from receiver to black from ceiling.

@XiaoGeGai Год назад

🎉 Thank you!

@diypotentials Год назад

Thank you!

@jeanfrancois7470 Год назад

Thank-you good job

@diypotentials Год назад

Thank you!

@odogujoe677 Год назад

It helped, thanks 😊

@diypotentials Год назад

Thank you!!!

@abrahambenitezavila3927 Год назад

Has some one had issues with the remote range? I changed the battery, and i need to aproach a lot to make it work. I think the remote receiver is faulty.

@frankpowell380 Месяц назад

Excellent video

@diypotentials Месяц назад

Thanks!

@blaneahm9891 День назад

Thanks for the video. Question, if I want to use a longer rod, the wires are short and won't come out all the way, is it safe to cut the end by the white clip and connect and use electrical tape inside the rod? I am surprised how they didn't think of this since the rod it came with is pretty short for my vaulted ceiling.

@blaneahm9891 День назад

Actually, I am assuming the 'some wiring' you mentioned is the extra wires to use for longer rods.

@dianapark1586 4 месяца назад

How did you get the remote control to work because I have it wired correctly But the remote control's not doing anything Even when I put the batteries in shouldn't I like come on or do I have to do Um lock Learn Thing that parental keeps telling me to do which is very confusing ?

@matts1364 4 месяца назад

I have a separate wall switch for old light and old fan. This new light isn’t clear as to how to hook up both. Do I only use one switch now and block off second one?

@diypotentials 4 месяца назад

Yes. As I shared in the video, I left one live wire unused. Thanks!

@kavonbrown8474 Год назад

What do you do if you needed a longer ball rod assembly?

@propbraker Год назад

haha very funny. lol

@DaddioWaddio Год назад

I have a wiring question I haven't found a good answer to. My old fan (w/ no light) was controlled by a single on/off wall switch. From the ceiling is a black, red, white, and ground wire. The transmitter for the new "remote" fan as a white and black wire to going to power source. Which wire from ceiling (red or black) do I attach to the black transmitter wire? And will the old wall switch now only send power to the transmitter (i.e. fan is now controlled only by the remote control)?

@diypotentials Год назад

Both the red and black wires are live. Either one should work. Since the remote transmitter comes with black and white, I would use to the black wire just to match the two wires.

@juancardenas4083 Год назад

The black and red are your switch legs which are used to distribute power to your light and fan separately. Since youre adding the remote you wont need both you just need one to power the transmitter. Connect the blacks at the switch and cap off and hide the red.

@Cristobal8605 Год назад

This is helpful however I wish I could still use both wall switches and not rely on the remote control option alone, is that possible? I.e. what if the remote is lost?

@harleydad1975 2 года назад

My wires have power but the fan won't turn on. I have no ground but that shouldn't be the issue. Any thoughts?

@diypotentials 2 года назад

You might have to rewire making sure the connections are tight. The lights and fan should work even without ground…hope you got it working already…thanks!

@Albertojedi 2 года назад

The cardboard ring would protect the glass lighting fixture. No need to remove it.

@TheOriginalBumper 7 месяцев назад

I bought this same fan and I wanted to wire the fan directly to a designated switch for light and fan. It’s such a nightmare because the way the led module can switch the color mode with pulses . I wish they made the led light with a switch to change the color temp rather than rely on the remotes since I’m not using the remote .

@joep918 4 месяца назад

Does your fan work with switch or only remote? It’s a pain mine doesn’t work with switch and light changes tone every time I turn off or on.

@linder00 2 года назад

Hi. I have 3 light switches connected to my fan/light with remote set up. Since the blue wire from the fan was connected inside of a plastic connector coupled with 2 other wires, I’m not sure how I should connect the red wire from the junction box. I capped it off but now I can only turn the fan/light off and on from one of the light switches. The other 2 are dead. Any suggestion? Thanks for the video.

@diypotentials 2 года назад

Hello, those switches were pre-wired to power the fan and light separately--one for the fan and one for the light. I'm not sure what the 3rd switch is for. But since your ceiling fan comes with a remote control, you only need to power it using one switch. Capping off one of the switches (red wire) as you did was correct. You no longer need that switch or the 3rd switch if is not connected to anything. Notice now that your remote control should have two switch buttons, one for the light and one for the fan. I hope this helps. Thanks!

@linder00 2 года назад

Thank you

@mannyguillen3603 Год назад

@@linder00 What I ended up doing, since I had a 2 Pole wall Switch and now only using 1 switch. I used the red wire (extra) in the ceiling fan bracket and ran some recess lights to round the fan area. It was super easy since the wiring is already there

@joep918 4 месяца назад

Why does the fan not work with the switch, only the remote?

@NS-yu6yf Год назад

You only used one power input to the receiver correct? I’m having a problem with my led light on fan turning on and off and when running both the light flickers

@diypotentials Год назад

I only connected one hot wire from the ceiling to the receiver.

@GLORTHAAK Год назад

Do you have your fan wired to a variable (dimmer) switch?

@tylorgreen7975 4 месяца назад

❤

@diypotentials 4 месяца назад

Thank you!😊

@angelabecerra4385 Год назад

Do I have to put in the down rod? Or can I bypass it?

@diypotentials Год назад

Hello, I don't think you can bypass it. Let me know if you can. Thanks for asking.

@omersarac6281 4 месяца назад

What brand is that fan ?

@BenJustSaid 3 месяца назад

Hampton Bay. Not a great one

@joelwagwag6602 Год назад

how

@joelwagwag6602 Год назад

how to order?

@johnnylim4105 2 года назад

I have two problems regarding safety in your installation method 1) the mounting screws are too light duty and not suited for the load. You should be using anchor bolt screws 2) you do not have a safety line to attach the fan to the mounting bracket.