How We Built the $100,000 Desk PC - Karl Jacobs Desk PC Build

Подписаться 16 млн

Просмотров 1,9 млн

50% 1

Thanks Seasonic for sponsoring today's video! Buy a Seasonic Prime TX-1600: geni.us/TBRYP9U
You saw the video about the desk we made for Karl Jacobs. But how did it all come together?
Discuss on the forum: linustechtips.com/topic/15228...
Buy an Intel Core i9-1300KS CPU: geni.us/sZVW
Buy an ASUS ROG Strix GeForce RTX 4090 OC GPU: geni.us/FmIU
Buy G.Skill Trident Z5 RGB 2x32GB 6000MHz RAM: geni.us/6t6wT4
Buy an EVGA Z790 Dark K|NGP|n Motherboard: geni.us/E5v3
Buy a SeaSonic SPX-70 PSU: geni.us/mKprnt1
Buy a Samsung 980 Pro NVMe M.2 SSD w/ Heatsink: lmg.gg/D9T8i
Check out EK's Cooling Solutions: lmg.gg/QTVGe
Purchases made through some store links may provide some compensation to Linus Media Group.
► GET MERCH: lttstore.com
► LTX 2023 TICKETS AVAILABLE NOW: lmg.gg/ltx23
► GET EXCLUSIVE CONTENT ON FLOATPLANE: lmg.gg/lttfloatplane
► SPONSORS, AFFILIATES, AND PARTNERS: lmg.gg/partners
► EQUIPMENT WE USE TO FILM LTT: lmg.gg/LTTEquipment
► OUR WAN PODCAST GEAR: lmg.gg/wanset
FOLLOW US
---------------------------------------------------
Twitter: / linustech
Facebook: / linustech
Instagram: / linustech
TikTok: / linustech
Twitch: / linustech
MUSIC CREDIT
---------------------------------------------------
Intro: Laszlo - Supernova
Video Link: • [Electro] - Laszlo - S...
iTunes Download Link: itunes.apple.com/us/album/sup...
Artist Link: / laszlomusic
Outro: Approaching Nirvana - Sugar High
Video Link: • Sugar High - Approachi...
Listen on Spotify: spoti.fi/UxWkUw
Artist Link: / approachingnirvana
Intro animation by MBarek Abdelwassaa / mbarek_abdel
Monitor And Keyboard by vadimmihalkevich / CC BY 4.0 geni.us/PgGWp
Mechanical RGB Keyboard by BigBrotherECE / CC BY 4.0 geni.us/mj6pHk4
Mouse Gamer free Model By Oscar Creativo / CC BY 4.0 geni.us/Ps3XfE
CHAPTERS
---------------------------------------------------
0:00 Intro
3:20 Assembling the Wings
6:38 It Weighs HOW MUCH?
7:19 Learning from our Mistakes
10:19 Cooling
14:46 Keeping it Structurally Sound
17:40 Maximum Overdrive
19:60 Things Go Surprisingly Smooth
21:00 The Final Touches
24:00 MINECRAFT! MINECRAFT! MINECRAFT!

Наука

Опубликовано:

31 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2 тыс.

@Skiman__ 10 месяцев назад

Love how Alex and Tim are treating linus like a kid lmao. Love the dynamic they have

@IdentifiantE.S 10 месяцев назад

Thats awesome !! 😄

@ravenite-void 10 месяцев назад

They’re not wrong

@thelittledetailscr7231 10 месяцев назад

Undermining!

@zack9912000 10 месяцев назад

You have to, he drops everything

@universaltoons 10 месяцев назад

translate 🙂 ฉันจะสมัครรับข้อมูลใครก็ตามที่สมัครรับข้อมูลฉันและชอบความคิดเห็นนี้.

@jackperchick851 10 месяцев назад

Crazy how with that budget you could build a baller pc for 10k. Redecorate your house. Go on holiday. Then still have enough left over to get a nice car and start an investment fund 😂

@jollygoodfellow3957 10 месяцев назад

The real money happens when you use it to start a business and spend it all in the process, then you can tell the tax man that you technically didn't make any income because it was all spent on your business. Jaspreet Singh method.

@awynsa 10 месяцев назад

Clearly, the true money is the friends we made along the way!!1! I'm pretty sure you couldn't do that much with 100k, at least not where live.

@eddoug259 10 месяцев назад

There is nowhere on earth where you couldn't do all that with 100k dollars @@awynsa

@WhatsIncluded 10 месяцев назад

@@eddoug259 why not? You said anywhere do the math you could easily do this.

@stephenhood2948 10 месяцев назад

@@eddoug259 It would be a small start to a small investment, but you absolutely could, and take a sweet vacation and hook your house up as well. Say 20k each for the house and vacay, 10k for the PC, thats 50K left over for the car and investing. 40K gets you a really nice used Vette, with 10K left to throw away on junk bonds.

@hns_203 10 месяцев назад

I love when they have someone with them that absolutely knows what they're doing, so Linus can sort of "let off" the pressure of making sure everything works and just focus on making the process entertaining. Tim from this video and Brian the electrician are perfect examples.

@Dead_Metal 10 месяцев назад

I like this dynamic too, the expert helps keep it somewhat informational and Linus balances it with the extra entertainment.

@sscadcam 10 месяцев назад

Again, an immense pleasure to have taken part in this project! But you had my heart skip a beat twice in this one 1) Linus drilling a hole in that beautifully surfaced face 2) Linus holding the wing and waiting for him to drop it... 😉🤣 Fabulous work once again by everyone involved!

@aayushsapra3982 10 месяцев назад

Was just seeing your video with NYC cnc and i was like thats the same machines i saw . and then thats the same guy😅. dope work tho.

@daltonhicks380 10 месяцев назад

Linus: "We don't technically have the money from him yet, you guys know that right?" Tim: "I'm not in accounting" Spoken like a true engineer lol

@ShotGunner5609 10 месяцев назад

I actually laughed out loud at this. Hahaha.

@mcmann7149 10 месяцев назад

Engineers are paid to make the product, not find the funding for it.

@bullet996 10 месяцев назад

Fax bruv

@Videaprojaekt 10 месяцев назад

As a Software Engineer, I can approve. Always funny to see how different Sales, Marketing, Accounting and R&D/Engineering think in general.

@iwontliveinfear 10 месяцев назад

@@ShotGunner5609same. I've totally been there. I can't count the number of times that I've said something similar.

@eldibs 10 месяцев назад

Alex was definitely the right choice for the intro on this one. It's fun seeing him geek out over machining equipment.

@axwapples 10 месяцев назад

i was getting reporter vibes for sure... Would love to see more of this stuff

@sscadcam 10 месяцев назад

He was like a kid opening presents on Christmas when I let him press the green button 😜

@eldibs 10 месяцев назад

@@sscadcam That is the kind of genuine joy we all love. The world needs more of that kind of happiness.

@sideshowdel 10 месяцев назад

It was awesome when he said trying to get the piece of aluminium into the machine was a huge pain in the arse.. The best pronunciation of arse that I've ever heard from a non Irish/Scottish Lad. Love his accent

@stillwatrpwnage 10 месяцев назад

"You're stressing me out, Tim" "That's okay" Love his energy

@ianlehman8342 10 месяцев назад

What i love about machining tbe desk out of solid aluminum, is its essentially the ridiculous evolution of whitlling down an entire log to make a toothpick

@lukefrahn8538 10 месяцев назад

good rule of thumb is that if you remove more material than you keep with a subtractive process, you should probably consider a different process. feel like this desk build should be an example used in engineering school about how not to do design.

@noname7271 10 месяцев назад

But then it would only be a $50,000 PC desk.

@GianBrugola 10 месяцев назад

Such a waste of money, energy, material... Terrible design, no words.

@Craft97pl 10 месяцев назад

@gianlucagandolfi3300 sometimes is is necesary to waste 95% alloy. ROG mothership laptop from ASUS is made similar to this desk. Bottom chasis was made from only 1 chunk of alluminum. It was necesary becouse 1 chunk was more stable and solid. Price was hight too.

@noname7271 10 месяцев назад

@@Craft97pl It was necessary? They couldn't have TIG welded it with high-quality alloy metal, they needed to waste 95% of an entire aluminum block? TIG welding, the same process used to weld rocket nozzles isn't strong enough for a desk... riiiight okay there bud. Please stay away from anything involving engineering for all of our sakes.

@thecyberquake618 10 месяцев назад

I'll always love the mild chaos Alex brings

@oftankoftan 10 месяцев назад

these 4 are the four horsemen of chaos.

@kangkim150 10 месяцев назад

The king of jank

@FenrisSkoll 10 месяцев назад

He really has no fuckin' idea. always a chore to watch.

@TheSupaCoopaGaming 10 месяцев назад

"I'm using our other cordless heat gun" *holds up blowtorch* That man is a national treasure.

@thecyberquake618 10 месяцев назад

@@TheSupaCoopaGaming that's the part that made me type my comment. I was laughing so hard from it

@BansheeBunny 10 месяцев назад

19:01 The CPU block can be disassembled and the insert can flip 180 to swap the inlet and outlet position.

@TippyHippy 10 месяцев назад

I put my hamster in a sock and slammed it against the furniture

@JohnnySinsFitnessOfficial 10 месяцев назад

@@TippyHippyWTF?

@MrDuudiduud 10 месяцев назад

@@TippyHippyman of culture i see

@rezy144 10 месяцев назад

@@TippyHippy Let anyone among you who is without sin be the first to throw a stone at him.

@dabearodactyl 10 месяцев назад

@@JohnnySinsFitnessOfficial it's a filthy frank reference

@EnbyCatboyGF 10 месяцев назад

I love the duality of engineering when it came to the cpu block "was this thought of?" "We'll just run the pumps in reverse" "did we think of this?" "yes" "Are you sure?" "Nope"

@andreasspachmuller7002 3 месяца назад

i like how linus explains that there would be no way to fix it if it´s wrong but from here it seems like they could just have turned the block 180 degrees?

@RednekEngineer 6 месяцев назад

as someone who worked in an machine shop for a couple years, I love seeing all that bright shiny aluminum!

@shanesheffer74 10 месяцев назад

I love the idea of a desk that costs more than a tesla

@sockems79 10 месяцев назад

Car PC? 🤔

@wlaznydominik 10 месяцев назад

what?@@sockems79

@sewwfffyhjijui 10 месяцев назад

Depending on the specs you choose, a Tesla could cost more.

@nixoncode 10 месяцев назад

are people still buying those?

@Leoappeared 10 месяцев назад

@@nixoncodeno

@kanethomo2483 10 месяцев назад

Tim definitely looses sleep over being worried Linus will break something he's been working on 😂 Tim seems like he takes alot of pride in what hes working on, love it!

@ES315 10 месяцев назад

"I just try to instill goodness in the people I work with" Tim seems like such a chill guy, more of him onscreen please!

@glenncain 10 месяцев назад

i prefer to imagine Tim as the Maestro or Masterchef having to chaperone a 6 year old kid that is Linus and then rolling his eyeballs and "ugh this is how you do it, please!"

@craigWS 10 месяцев назад

Tim's positivity and tranquility is relatable and wholesome. He definitely brings Linus down to reality both on and off screen 😂

@MCG31 10 месяцев назад

surprised they didn't go with a 4 leg standing desk setup. not only would it handle more weight but it would also be much more stable at standing height.

@MacCosmic 10 месяцев назад

It's cost and complexity. Two is easier then four for the cost and control of the height sensors, safety sensors and motors as if any of those fail the table "could" topple or dump it's contents. Trust me, one leg will crush anything human caught between it and it's movement, which is why they had to adjust the weight for the leg's to move constantly. Seen some legs built with plastic " parts" which is my one fear for if they stop working, it sucks.

@noname7271 10 месяцев назад

They ran out of money. An extra two legs would have cost another $100,000.

@retr0288 10 месяцев назад

These engineering videos by Alex, ty and Kyle are probably the reason some kids might choose engineering. That has to put a smile on their faces at the end of the day😊

@Jaszczur-sp2tx 10 месяцев назад

not really

@todorow22 10 месяцев назад

Being an engineer is very different from what you see in these video IRL. They will likely be disappointed if this is why they go into engineering.

@5ausageandMash 10 месяцев назад

The desk would have been cut in plates and bolted for instance or if you really wanted one piece to weld together the plates then machined you mean?

@stefan514 10 месяцев назад

Calling Alex an engineer causes me physical pain

@LoneWanderer905 10 месяцев назад

@@todorow22spending a whole month on single project in solidworks is pretty much engineering (and maybe a little insanity but we all dip in it sometimes don't we?)

@vloqy 10 месяцев назад

Thanks guys been waiting on a guide, gonna attempt to build this next week.

@EKWBofficial 10 месяцев назад

This PC turned out even cooler than we could've ever imagined!

@abdulkadiraminu262 10 месяцев назад

As a mech eng student soo happy to hear terms i know thrown around. another great video guys👍

@___ty__ 10 месяцев назад

Just wanted to say thanks for always having great subtitles. I've lost some of my hearing recently and I've never had to deal with CC before this but your channel has done a great job!

@Samyaak08 10 месяцев назад

Wow not to be rude but how did you lose your hearing

@fabiandrinksmilk6205 10 месяцев назад

I haven't lost my hearing or anything, but I always watch with subtitles to understand things better and so I can keep the volume low for the people around them. I have to agree, this channel has great subtitles that are available from upload. I just think it's a shame that we can't contribute subtitles anymore. I've many times thought to myself, these auto generated subtitles suck, I should improve them so other people can understand the video better, only to realize that RU-vid removed that feature a while ago.

@dingus6317 10 месяцев назад

@@Samyaak08Probably age or loud noises

@leonro 10 месяцев назад

@@fabiandrinksmilk6205 RU-vid has been ruining a lot of things that make a channel truly a community, like dislikes (both on videos and comments), fan contributions like subtitles (and translations), comments after google+ was killed (you can't @ multiple people now and for a while couldn't do it at all), and even the botched comment moderation is both still allowing scams and removing proper comments. They instead have been going at it from a big business friendly angle (easy censorship and copyright claims) that facilitates scams and are pushing features that just generally deepen the parasocial relationships of viewers (video creator hearts, channel memberships, merch store integration, highlighting a creator's reply etc.).

@___ty__ 10 месяцев назад

@@Samyaak08 I work in a lab and commonly use some shnazzy vacuum pumps. Long story short there was a problem, a loud noise, and I lost most of my hearing.

@theperfguy 10 месяцев назад

Its probably less chaotic than the last one Linus built for himself and just Alex to help. Yes, its good to acknowledge that Alex does experimental "Janky" stuff better, he is good for trying ultra weird things and CNC milling the metal. But they need someone who is serious and has a professional attitude (like Tim) to complete such a niche project, specially being surrounded by Linus and Alex.

@yoominbi 10 месяцев назад

The look on Tim's face at 7:11 😂 He was so done

@BloopTube 10 месяцев назад

"Are you doing that by eye, youre stressing me out" the old eyecrometer never fails.

@MGlBlaze 10 месяцев назад

I can't believe you machined that desk from massive blocks of aluminium stock. I would have thought it'd be sheet aluminium bolted or welded together. But, like you said, Karl wanted extravagant.

@Artificial.Unintelligence 10 месяцев назад

That’s not extravagant.. Aluminum is not exotic or expensive. GUARANTEED the dude wouldn’t know the difference or care. It was simple a way to jack up the price via hours & machine time… it’s 1000000% impractical and wasteful. The ONLY perk of doing it this was was the FUN for the team to do and learn. < mechanical and electrical engineering + manufacturing background >

@geort45 10 месяцев назад

totally stupid. Reducing 500lbs of aluminum to 65. Should have gone all the way and manufactured a full die-cast mold, then just do a 1 unit batch of cast aluminum

@Artificial.Unintelligence 10 месяцев назад

@@geort45 infact, they may have had better use if they figure out how to make custom mold sets (making that budget huge) and make the guy a mold with crazy stuff or something; like resin cast with titanium support and iunno gold flake it?? Then they could use the molds to produce a cheaper, more practical product in a batch-size-that-gives-a-ROI to fans with too much money

@scatdawg1 10 месяцев назад

@geort45 cast is still overkill... Should of been fabricated from plate welded together and then passed thru the mill. Would look Exactly the same

@jphorn1223 10 месяцев назад

cute sona

@ImOnMy116 10 месяцев назад

anyone who’s ever built a custom loop is probably thinking about the nightmare of maintaining this loop and all the possible points of failure! It’s an absolutely insane feat of engineering and planning, but also terrifying to think about running this system long term.

@stale2665 10 месяцев назад

I doubt someone who buys something like this is all that bothered about that. EIther they hire someone to do it for them, or they just throw it out when the time comes.

@ImOnMy116 10 месяцев назад

@@stale2665 and it’s the latter part that’s sad to think about! Or even just seeing a system like this eventually devolve to sludge and grime from neglect, I just feel like custom loops for non-enthusiasts really don’t make sense to me unless there’s support in place to keep it running.

@jackquick8362 10 месяцев назад

Will be redone in under a year so...

@minecraftrule101 10 месяцев назад

i enjoy watching LTT teaching us what tech do what and go detail and making it easier to understand

@nomadicdragon7157 10 месяцев назад

Alex it was a pleasure meeting you at LTX. Thank you for helping to make the expo amazing!

@breakies 10 месяцев назад

NEVER seen Alex THIS enthusiastic talking about anything as their new Toys.

@TheChiefSmeg69 10 месяцев назад

I worked in the Military Aircraft Industry for a LOT of years, it is funny to see how excited these guys are getting over what for me was an every day sight. Programming NC machines to make this kind of component is very satisfying, especially when you run it for the first time and it it is perfect. Looking good guys. Oh yes, also shoutout to the Savage Industries split leg apron!

@charliebeij5181 10 месяцев назад

Love watching build videos like this!

@kevinroberts7846 10 месяцев назад

I know I’m a little late but I live near the Seattle area and I worked machine shops for a few years and these machines are cool but I’ve worked wayyy more complicated parts however they were for Boeing planes and laser surgery companies not a pc desk lol. I really wish I could have made a custom pc desk during my machining days! So cool to see the work behind everything keep up the good content!

@p_o_o_g8139 10 месяцев назад

Love to see Alex and Tim so happy with the big mills

@_3r0 10 месяцев назад

Big mill(f)s😏

@fabiandrinksmilk6205 10 месяцев назад

@@_3r0 That's what I first read lol. I had to read it again to see what it actually says.

@handleistakenheresoneavailable 10 месяцев назад

Most relatable tutorial ever. I'm sure we can all build a $100,000 desk pc.

@chungushimself3712 10 месяцев назад

It's not that deep at all man. Ofc majority of people aren't going to be able to afford a $100,000 desk pc. I'm sorry you feel like you need to relate to every single piece of content you watch just to enjoy it.

@MrScorpianwarrior 10 месяцев назад

@@chungushimself3712 Welcome to the internet, where sometimes people make jokes

@bullet996 10 месяцев назад

@@chungushimself3712you must be fun at parties.

@n3ttx580 10 месяцев назад

@@chungushimself3712 damn that went way above your head

@DantesGrill 10 месяцев назад

@@chungushimself3712 What are you even talking about? Of course most people here can afford that. You're just the exception because you're poor. The reason we can't relate though is because using aluminium instead of solid gold is just lame. What do they think my annual salary is? Below 500k? Come on guys, I know you can do better than this!

@tankisingh 10 месяцев назад

I faced the exact same issue with my Flexispot desk, the desk would go few cm up and then come back down. The issue was the sensor is build into the height adjusting remote and it needs to be mounted before doing any testing/height adjusting.

@jimmypop9778 10 месяцев назад

When you hit cycle start on the haas I could hear the beep, the tool change and watched it rapid to the block. As soon as it touched the music starting playing and it sounded like the machine crashed for a second. My heart skipped a beat.

@ccmaster86 10 месяцев назад

11:10 "Wow that is extremely tight." "Thank you." Ah yes, a true engineer's response.

@janisvaskevics93 10 месяцев назад

Lasercut, bent and welded aluminum was forbidden? You could later machine it and save days of machining and thousands of kilowatts. Also, savings on material would have been fenomenal.

@matevzgregoric1280 10 месяцев назад

no common sense was used lol

@ska042 10 месяцев назад

I mean yeah but being ridiculous was kind of the point. When you save money on the $100000 PC, it's no longer a $100000 PC. They ran out of sensible ways to spend money so this is what they did.

@IAmTheBugInsideYou 10 месяцев назад

*phenomenal just so you know, but yeah agreed

@janisvaskevics93 10 месяцев назад

@@IAmTheBugInsideYou thanks! Not a daily english speaking person. Got rusty.

@IAmTheBugInsideYou 10 месяцев назад

@@janisvaskevics93 Yeah I thought it might have been a language thing no worries :)

@meraki2545 10 месяцев назад

Always love the excitement of a machinist loving the trade

@ScytheNoire 10 месяцев назад

These blocks of raw aluminum are cute. Ones I used to work on at a CNC shop would weigh 50 tons or more and require an overhead crane, sometimes two of them in tandem. We did rough and semi-finishing for large size plastic molds, most often auto-manufacturers.

@MysticMylesZ 10 месяцев назад

Gonna rewatch the first one(showcase) after this. 7:07 Linus' back and groin was never the same after that day. 😂

@markfen88 10 месяцев назад

I've built like 15 desks using similar legs. The controller has a gyroscope which detects tilt or unexpected movement. So holding it in your hand always causes this issue. Need to attach it to the desk or place it on the floor and not move it.

@MacCosmic 10 месяцев назад

Interesting to know of that change. I dealt with those legs in the video for "medical tables" that supported heavy and expensive medical equipment for over 10 years (but that was 5ish years ago), and none had gyro's. The ones I dealt with had built in limit switches for top and bottom "mechanical limit stops" and a external safety switch on the bottom of the table to prevent crushing anyone's seated legs when lowering. Was the exact same calibration steps the video shows. The "controller monitors current to each leg motor to determine "tilt" issues if one leg motor is working harder then the other. It's why the table would stop raising also in the video when they were calibrating the legs. The above average weight was drawing too much current and triggered a "stop command" incase it was crushing someone's hand. Note it will still hurt/do damage to soft human parts, DO NOT underestimate the power those legs have. I still have a pair of the 1st gen from a discarded table which I use for my own PC desk.

@Sirusdark 10 месяцев назад

3:56 - Cool to see Adam Savage' apron in the wild!!

@jstriker90 10 месяцев назад

As a cnc operator/programmer, I can greatly appreciate this video. I've run most or all of these machines throughout the years and seen some cool shit made. Currently I make parts for 747s, jets, and other airplanes.

@croozerdog 10 месяцев назад

i hope the new ceo gets comfy enough to just walk in and say no whenever linus is about to lift something

@Send_it_to_the_wall 10 месяцев назад

Desk pc vids are always so intriguing to me! Love your content!

@DBRichardNL 10 месяцев назад

Looking at those wings and the starting block...avoiding a few fixtures made it a lot more work and a lot of added waste. But it looks incredible so it's got that.

@jokeassasin7733 10 месяцев назад

I prefer to media blast aluminum to give a more even surface. Fresh milled is a style choice though. Also I don't know if you clear anodized the aluminum after machining. Aluminum does oxidize a lot.

@MysticMylesZ 10 месяцев назад

24:08 😁 MINECRAFT MINECRAFT MINECRAFT! 😂 Wooo

@ilovehotdogs125790 9 месяцев назад

I must say, despite all the outlash going on recently. This is a great video guys. This is the model I personally like. Linus and team are just naturally hilarious, in a good way. Great dynamic, kinda like a sitcom. And today I learned that 5052 aluminum is better for bends and 6061 aluminum is more structurally sound for an application like that desk. Funny, and I learned something that is useful. Thumbs up!

@grn1 6 месяцев назад

Another good thing to know that is that there are different types of stainless steel and most consumer products use the crappiest version which is barely rust resistant (No steel is perfectly rust resistant but the better versions aren't likely to rust in a noticeable way unless exposed to constant salt water or high temperatures and/or oxygen concentrations).

@ilovehotdogs125790 6 месяцев назад

@@grn1 is 416r a good stainless steel? What type are you referring to as crappy?

@grn1 6 месяцев назад

@@ilovehotdogs125790 To be honest it's been a while since I've looked at the numbers so I don't remember which ones are which. I remember my old shop used to work with both 300 series and 400 series but I can't remember which one rusted almost as fast as regular steal. The better ones (from a rust resistance standpoint) tend to have higher concentrations of aluminum and/or other rare (ish) earth metals. They do tend to be softer though which is part of the reason why high carbon steal (not stainless) is still used in critical infrastructure (the other reason being that it cost less even with the extra precautions needed to protect it from the elements).

@ilovehotdogs125790 6 месяцев назад

@@grn1 ah ok, good to know!

@JeffJefferson2 10 месяцев назад

I had the same thing happen to my standing desk where I could only get it up and down a little bit at a time. Well, initially the installers said I needed a new controller, but later the issue was found to be the sensitivity SSC up & down function being set to some random numbers and the solution was to zero them functions.After that the desk works perfectly.

@andreasklossek9252 10 месяцев назад

1:10 Somewhat cute to see one excited about a CNC going through ALU like butter ^^

@filpoamati 10 месяцев назад

I love how he gives us a guide as if we have that kind of money for a car, let alone a pc

@3nertia 10 месяцев назад

We literally walk to get groceries lol

@AlphaShadowSphere 10 месяцев назад

This thing costs more than my wife and I's two cars. I guess I know what I'd spend money on now if I won the lottery

@fabiandrinksmilk6205 10 месяцев назад

@@3nertia Isn't having a grocery store nearby with walkable streets already a luxury for many people?

@3nertia 10 месяцев назад

@@fabiandrinksmilk6205 Who said the grocery store was nearby or that our streets were walkable? 😅

@leonro 10 месяцев назад

@@AlphaShadowSphere the first time I read your comment I started questioning how can a wife cost money, and then how much one would cost (lol) if you ever win the lottery and get something like 1M it's best to put the money in a stable fund that gives you like 2% per year and just enjoy the yearly free 20k

@Jaffythethird 10 месяцев назад

Had the privilege of meeting Tim at LTX. Helped me liquid metal my Steam Deck, and even returned my lost SD card to me after. Tim's a really cool guy, and I'm glad he got the spotlight in this video.

@timholowachuk 10 месяцев назад

I’m glad you had fun at LTX, I did too (: it was a good weekend for Steam Deck mods!

@user-ul9wt8qb1t 9 месяцев назад

I'll always love the mild chaos Alex brings. This PC turned out even cooler than we could've ever imagined!.

@blaxxun75 9 месяцев назад

I like this since I worked for 5 years on an STAMA 5000 machining center that is around 50 feet (15 meters) long. A total beast

@7991rellik 10 месяцев назад

10:21 thanks jesus! just what I needed.

@syedia 10 месяцев назад

He was sent a cooler from the afterlife

@Snookers_ 10 месяцев назад

At work I usually try to bring a little chaos to things similar to Linus in this episode, but watching this video helped me to realize just how much fear I probably instill in my coworkers. I'm not going to stop though.

@PrograError 10 месяцев назад

*[ coworkers sweat intensifies ]*

@elvara872 10 месяцев назад

Those EK reservoir combo are crazy and look so good.

@WongInvests 10 месяцев назад

I remember seeing Tim in that coffee making video. Got REALLY into making coffee and just realized he's been working on this all this time lmao

@Jst4vdeos 10 месяцев назад

Minecraft youtubers buying $100k PC is when you know the biggest recession is still to come

@lamoratoria5654 10 месяцев назад

frfr

@zack9912000 10 месяцев назад

Well, in 20 years, it will be in a scrab pile on storage wars😂

@mahdi9064 10 месяцев назад

@@zack9912000who said youre going to live that long to witness that

@AlexComanM 10 месяцев назад

Not gonna lie, this design is very similar to the one I built about 7 years ago, very similar shape. Personally I think this is the most ergonomic design a PC desk can have, lots of leg room and enough room for the rads. Good job you guys.

@ALCRAN2010 10 месяцев назад

Rectangle?

@AlexComanM 10 месяцев назад

@@ALCRAN2010 I'm referring to the rads on the sides, components spread in the middle. Basically sides larger, mid thinner for the leg room, nice and symmetrical.

@AlexComanM 10 месяцев назад

@@ALCRAN2010 actually I should have it posted it in the forums, probably archived. It didn't pick up steam on the forums, but I had some articles written about it too.

@Saint_Wolf_ 3 месяца назад

I'm glad Karl did do a video on it, I still remember that Hacksmith made one of those backpack lighter lightsabers for Mr. Beast to have and he never released that video.

@Strm86 10 месяцев назад

I enjoyed this video i work for a defense contractor and we get huge pieces of aluminum. Crazy what these machines do.

@MisterSixty 10 месяцев назад

Tim is absolutely *the COOLEST* Tim is a *gold mine* Tim epitomizes the perfect Engineer.

@johnd.1618 10 месяцев назад

There is an easier way. You buy a desk with a drawer and a PC at the cost of $2000 both, then put the PC on the desk and $98000 cash, in the desk's drawer.

@JustinCrediblename 10 месяцев назад

get the desk off of craigslist for an even better deal

@koenhendriks4811 10 месяцев назад

Ah yes thank you. I'm stealing that idea!

@nekdo_kavc 10 месяцев назад

The problem with that plan is that 2000$ is not enough for a computer without a monitor, desk and everything else. Just for the box i spent 3000€ and i don't even have 4090 in it.

@mitsuhh 10 месяцев назад

the 4090 alone costs $2000

@Stampybampy 10 месяцев назад

2:42 This was exactly what I was thinking about up until this point in the video, thank you so much for satiating my racing brain's curiosity!

@demonmaestro 10 месяцев назад

I always enjoy seeing people get excited over machined material.

@samuelschwager 9 месяцев назад

12:55 "are you just trying to make the workplace less hostile and toxic?" - that did not age well...

@FlorianKarmelk 10 месяцев назад

Hey linus/crew, How can it be you guy's didn't do a video on the framework 16" pre order opening yet? All spec's got released and we viewers got to know the opinion of the expert's ofcourse :) Love the videos btw, keep it up! :)

@Kalamordis 10 месяцев назад

Not yesterdays WAN show but iirc last week (or week prior at v latest) Linus talked about it!

@confusedbeard69 10 месяцев назад

As a lasercutter I'm very happy to see some proper machining on LTT =)

@nathank5140 10 месяцев назад

9:15 rofl 🎉 I spent about 1 1/2 hours setting up a standing desk for a client and had the exact same issue! There is an accelerometer in the control unit and the control unit is not attached to the desk. When it detects that there is no movement of the control unit when you’re pushing the button, it activates a safety mechanism. As soon as you put the control unit on the desk and it moves in sync with the desk the issue is resolved. This is a sort of crash avoidance, safety mechanism, but it did take me about 45 minutes of sweating in front of a client to figure this out so extremely entertaining to see you guys reverse engineering the same problem I did! Isn’t the manual great?

@Neoxon619 10 месяцев назад

I feel like this was a video in the back pocket in case of a rainy day, but I’m not complaining one bit. Well, maybe a little out of jealousy that I can’t afford this kind of desk PC.

@R2debo_ 10 месяцев назад

Title: Building a $100k PC. Reality: Building a $6k PC with $20k of peripherals and an $74k desk.

@Checkmate_Edits 10 месяцев назад

Bruh 💀

@universaltoons 10 месяцев назад

@fitybux4664 10 месяцев назад

And a desk made in a really dumb way to take the maximum amount of money possible.

@paveldrumev2117 10 месяцев назад

I havent seen Linus to have that spark in his eyes for a long time. You can tell he absolutely loves this project. :)

@Koalateatimes 10 месяцев назад

I work with a customer in my job and they have that giant machining machine for the wor they do. So cool how it works and how advanced it is for its age

@swlime3910 10 месяцев назад

14:48 Double Linus

@cncgeneral 10 месяцев назад

I feel like welding plates together then machining down would've been worthwhile for this. Doesn't seem like there was much to gain from machining from billet. Wire arc 3d printing would've been cool too if you could've found a company that can do it

@timderks5960 10 месяцев назад

Yeah, that machining was extremely wasteful. The millings going to recycling isn't quite good enough.

@lukefrahn8538 10 месяцев назад

As an industrial designer I find this desk design to be painfully cringe. Granted, I didn't read the brief, so ludicrous expense may have in-fact been a requirement.

@iDreu 10 месяцев назад

David is a treat on camera matches yalls energy so well

@josh7120 10 месяцев назад

21:38 they PERFECTLY synced together lowering there heads below the table

@ZERARCHIVE2023 10 месяцев назад

Nice detail

@MartianDill 10 месяцев назад

2:41 wouldn't it be cheaper to order a custom casted piece rather than buy 5k$ brick and shave off most of it?

@jarnoojasaar 10 месяцев назад

11:15 that's what he said

@aaronbeaupre909 10 месяцев назад

Fancy that, my pops works at DMG Mori. Getting to see those machines in action is a blast.

@heyitsjel 10 месяцев назад

Looks insanely awesome and no doubt a fair bit of time went into designing this project, but I do feel like this could have been accomplished for significantly cheaper by *NOT* using massive Al billets. They could probably have saved significant material and machining costs by replacing certain pieces with sheet/plate aluminium and smaller machined billet sections, then tig welded sections together. Even the welds could be machined back if you were concerned by the aesthetics, as this isn't exactly a mission critical component with high structural loading. Also, you may want to apply some sort of transparent film coating (or use polymer washers) to the stainless bolts, or you will probably end up with some galvanic corrosion and/or discoloration between the aluminium and stainless components. PS. if anyone reading this ever installs a solar array on the roof of their house, I *highly* suggest you apply an anti-seize to the bolts (usually stainless) which are in the hold-down clamps... otherwise a few years (eg. 5+) you'll likely find you won't be able to undo the bolts (ie. shear off the heads, or round out the internal profile) if you need to remove panels for access to your roof space! Courtesy of galvanic corrosion...

@spowart314 10 месяцев назад

finally a tutorial for this ive been looking everywhere

@theteenageengineer 10 месяцев назад

It’s always funny that Linus always seems so surprised about Alex’s janky solutions. Even the viewers know to expect janky solutions from Alex

@victorm316 10 месяцев назад

So cool. As I am watching this. I'm Milling in my vertical mill Mori seiki.

@bstives58 10 месяцев назад

LTT always bringing together different nerd communities...I am a Tech and Machining nerd...this was a very satisfying video!

@nathanfife2890 10 месяцев назад

I feel like I can empathize with the engineer who keeps being so happy that everything is fitting exactly as he planned while linus barely notices lol I feel like I'm watching my entire life be played out in a short video

@timholowachuk 10 месяцев назад

It was so cathartic. The entire day went way better than I had expected.

@busstopreviewer 10 месяцев назад

I love that Tim gets to be in front of the camera again after talking about the specifics of how he pours water onto his fancy coffee filters. makes me very happy

@Madblaster6 10 месяцев назад

This, DIY Perks, and Basically Homeless all uploading the most insane builds in the same 48 hours.

@andrewhudson6199 10 месяцев назад

There's a tool to set the exact depth you want for hand countersinks. Definitely worth buying. I don't know the name, but I've used it for countersinking rivets.

@robeagleR 10 месяцев назад

This is a work of pure engineering expertise and whilst no person SHOULD spend $100k On a Computer/Desk or well really anything for that matter.. It was bloody well worth it.

@FaizanKhan-iq3yd 10 месяцев назад

@user-kq8iz4cf7w 10 месяцев назад

wrong, this is the worst designed thing ive ever seen

@ISawABear 10 месяцев назад

Man.. this kid emitted more carbon making this desk than most people will in their lifetimes.

@fitybux4664 10 месяцев назад

Which kid? 😆

@nathangodard3333 10 месяцев назад

Just a note that you have a chapter for 19:60 in the description, which is not a real time stamp. Love the video!

@IOUaUsername 10 месяцев назад

If you want bolts to align parts, you should use a tapered/countersunk bolt head and nut.

@doce3609 10 месяцев назад

I really love Tim. Would really like to see him more.

@tyler3201 10 месяцев назад

If this desk doesn’t make it to a museum in 30-50 years or so, I’ll be very upset.

@djohannsson8268 3 месяца назад

Although it's a little late ... Months late, would have liked to see it in a mock up gaming suite. Would have shown off the awesomeness. Only needed a couple minutes of it working, camera shot. For those of us who will never own such a work of art.