Thank you for this Video tutorial, I have the same HP PC 8300 and my own does the same as described in in your video. It blink Red light when I connect it to power so am gonna go get the right charger 135A -19.5V . Hope it works. Thx and God bless u 🙏❣️
Yeap usually it's power issue for example not right power supply or maybe processor has an issue but you got to eliminate each possible problem until you be able to figure out exactly what is caused the problem
Good video, thank you. I have HP Compaq Elite 8100 SFF, I took out 2 - 2GB RAMs to store to buy 2 - 8GB, they won’t connect as I found after opening box they are DDR4. I connected old RAMs but now having red light and continuous beeping amd no display, I have wireless mouse and keyboard. I have this desktop for 5-6 years now Windows7
Reinstall the old RAM: Ensure that the RAM is properly seated in the slots. Sometimes improper seating can cause beeping and red light issues. Make sure you press firmly enough to ensure the clips snap the RAM in place. Check the RAM compatibility: The HP Compaq Elite 8100 SFF likely uses DDR3 RAM, not DDR4. DDR4 RAM is not backward compatible with DDR3 slots. Make sure to use DDR3 RAM sticks. Reset CMOS: Sometimes, resetting the CMOS can help resolve boot issues. To reset the CMOS, you'll need to locate the CMOS jumper on the motherboard and follow the instructions in the user manual. This will reset the BIOS settings to their default values. Disconnect peripherals: Disconnect all peripherals from the computer except the monitor. This includes the wireless mouse and keyboard. Sometimes, conflicts with peripherals can cause boot issues. Check for hardware failure: If the issue persists, it's possible that there could be a hardware failure. This might be related to the motherboard, CPU, or other components. In such cases, it might be necessary to consult a computer technician for further diagnosis.
I have hp slim computer 8000 elite my power supply is 135 it was working fine. until the next day I was going to use it, the light green in the back of the plug doesn't light up it only stay yellow an when I press the power button on the front it doesn't turn on it stay yellow in the back. I remember that when I use to turn it on the yellow light turns off an the green light turns on. I think is the cpu an heatsink that needs paste, any options do you have for me, Thanks for your time.
1. Check if the power supply unit (PSU) is working properly. If the light on the back of the PSU is flashing, it should not flash with all connectors removed. Plug the power cable into a different power outlet that is known to be good. If the LED still flashes, the power supply should be replaced ². 2. Disconnect everything from the computer, including the power cord. With the power cord disconnected, press the power button on the front of the computer. Plug in the power cord to see if the computer automatically turns on. If it does not, the PSU may need to be replaced ⁴. 3. If the above steps do not work, try resetting the CMOS by locating the little yellow clear CMOS button inside the case near the coin cell battery. Press and hold that button down for about 15 seconds. Then hook everything back up again ³. (1) HP Compaq 8000 Elite Ultra-slim PC - Troubleshooting | HP® Support. support.hp.com/us-en/product/troubleshooting/hp-compaq-8000-elite-ultra-slim-pc/model/4065900. (2) Solved: Green light blinking - HP Support Community - 6276939. h30434.www3.hp.com/t5/Desktop-Boot-and-Lockup/Green-light-blinking/td-p/6276939. (3) Computer won't power on - HP Support Community - 6158103. h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/Computer-won-t-power-on/td-p/6158103. (4) HP 8000 Elite won't work with extra ram - HP Support Community. h30434.www3.hp.com/t5/Desktop-Hardware-and-Upgrade-Questions/HP-8000-Elite-won-t-work-with-extra-ram/td-p/6063906.
Hey I don't know if you will see this but I have HP compaq 8000 ssf and when I turn it on I get one beep but no display, computer stays running till I turn it off, no heating, fan works well, and it's green light, no beeps after that, just no display, I have no idea what's wrong, my keyboard works too so it's sending power, I tried replacing the 4 2gb ram cards with 2 4gb ram cards (cheapest I could find) but still dosnt display anything, and idea what's wrong?
What is the hertz rating of your RAM, what does the RAM label says, try to just use one ram card and see if the display starts to work, try removing the battery on the motherboard that will reset the BIOS settings, which can help if some settings in your BIOS is making the issue appear. Also try to use your old 2gb ram stick would it work with it?
Hey bro my hp Desktop 8300 elite tower keeps making 4 beeps with a red light...tried everything but nothing seems to work...I've researched and most of the blogs say it could be a power supply issue...the fans won't spin too...any ideas on what might be wrong
From what I know the when the pc makes four beeps it got to do with power supply brick not having enough power to run the system, make sure your power supply is the same rating as the power specification written on the side of the computer. It would be easy to check if you have multimiter. If your power supply worked before it could be because power supply got faulty. Try to replace it with the right power rating.
@@Yo-Bruh look at your hp computer on the side of it it will show voltage and amperage rating for example 19.5v 5a. Your new power supply should have same specification
Make sure your power adapter matches the recommended wattage for your pc, try to unplug all peripherals from the pc and try starting it, the 4 beeps could indicate bad power adapter.
@@fixoffrepairshop9568 Thank You for the prompt reply. I have tried to reseat the processor itself, RAM to no avail. I mean the board is rather complicated and if the easy solutions do not help what to do to sort the issue out? I mean if someone had the same issue and can share the solution it is much appreciated.
@@akdiscreto Try resetting the BIOS/CMOS settings to default by removing the CMOS battery for a few minutes and then reinserting it. Test individual components (RAM, processor, hard drive) on a known working system to ensure they are not faulty.
@@fixoffrepairshop9568 I have removed the 3 V DC battery to no avail. From Your experience there is usually no problem with ordinary components on the mother board (I mean SMD components and micro schemes)? You think there is a contact problem on the Processor/RAM slots?
@@akdiscreto Check the processor and RAM slots for any physical damage or debris that might prevent proper contact. Use compressed air to clean the slots if necessary. If the motherboard has multiple RAM slots, try using different slots to see if the issue is with a specific slot.Look closely at the motherboard for any signs of damaged capacitors, burnt components, or other visible issues.Boot the system with the minimum configuration (CPU, one stick of RAM, and no additional peripherals) to see if it will post.
Hi! I have the same system unit but it's not turning on. When pressing the power button, it lights up and beeps once then that's it. It doesn't turn on
@@fixoffrepairshop9568 Thank you for replying! It's green. It turned on a few minutes ago but I didn't do anything. Got any thoughts on what may be the problem?
@@Renzjonson try to open the case up and take out all the ram sticks and then insert just one and try to start it. Also does anything comes on the screen? And does your pc stay or it turn off right after you hear the beep?
@@fixoffrepairshop9568 Hello! I'm sorry for the late reply. Haven't been active on Medias. I tried just sticking 1 ram stick and it still didn't work and nothing comes up on screen. Yes, you're correct. When I press the power button, it turns on for half a sec (the green light turns on as well) then turns off right after the beep.
@@Renzjonson that's very unusual, maybe the pc needs thermal paste changed on the processor, something triggers a instantaneous shutdown perhaps to prevent damage, maybe its over heating or the cpu fan is dead try to verify its not over heating and all the connections are solid to all components
If you have same model as mine, your power supply needs to be 135 watts, also the range is 6.9-7.1 amps and 19-19.5 volts if you multiply amps with volts, you will get wattage, 130 watt is 5 watts less than required, but doesn't hurt trying it.
Sir, could it be the cpu??? Because i just bought 2 of those lads, the same 8000 ultra small, both 4 beeps (had to buy an adapter, 1st dell 130W, not compat., second 'hp' but not hp brand, PA-1131-08HC), not fixed by anything. Tried both cpus in both mobos, tried various ramsticks, it beeps 4 times even without ram(beeps 3 times with cpu out). Right now i am at either mobos are out, cpus are out or the adapter (was not cheap and seller claims it substitutes HP). I am buying a compat cpu (8euro, e7500)
@@fixoffrepairshop9568 that 8000 elite wants exactly 135W (19V, 6.9/7.1A). Already ordered different powersupply, they told me that this 1131-08HC won't work and sold me 1131-06HE (they have even 1131-06HF but they claimed they're the same in my case) so yuppee i hope
