U saved my life with the bottom compartment. Thank u. Watched other videos and helplessly searched the first two in frustration and popped the bottom open, took out what was inside, and it worked again!
You are the best!!! We had a paper stuck in the bottom! Seems like HP might make this a little more obvious somewhere in all the stuff we dug through, but glad for people like you!! Thanks so much!!
Thank you so much for your video. My printer was not printing and then I found your video. My printer is now PRINTING. Thank you again for making this video, and I learned how to open different parts of my printer. 😍
Man I appreciate you lol if it wasn't for you showing that bottom part that opens I wouldn't have found a random 2025 battery package stuck down there lol
Couldn’t figure out what was wrong with my paper feed until I saw you open the bottom trap. Cleaned the rollers and did everything on the HP website to troubleshoot, then after watching your video I found my daughter’s hair barrette in the bottom trap that was stopping the paper from feeding correctly 💁♀️ Thank You!
Thank you thank you thank you!! The bottom compartment was open! I closed it and BAM! That did the trick. I was two seconds away from buying a new printer. God bless you man!
Bravo to you for posting this video!! I have been sitting here freaking out How to get that tiny torn piece out Hallelujah!! The ink compartment!! I didn't even think! Thanks so much!! I can complete what I needed to hopefully tonight! Thanks again!
@@TheReviewer85 you did! It was imperative that I got that work done last night! I couldn't have done it without the printer and of course YOU! I'll be looking out for more helpful videos! Thanks
Thank you so much for this! I cleaned my rollers and everything is fine now 🥰 Also had an eyeliner pencil lid in the bottom ? 🤦🏿♀️ Had to be my sister's.
Thank you soo much!! I did all you said to do and it worked! To get to the roller I used a cue tip and taped it to a wooden skewer and it was able to reach the rollers! 😊
Omggg thank you!!!! There was a mechanical pencil stuck in the bottom compartment where the white flap is!!! I opened it and there it was!!! I almost went a bought a new one! And I barely had any money for a new one! (College student) thank you again!!!!!!!!!! Gave you a sub! Not even sure what kinda page you are but im stull subbing haha
Thanks for the info, I have been trying to figure out what was going on with this printer for a year. This printer never feed paper threw the printer for about a year. All over a stuck beer cap which was stopping the paper feeder lol. Opening the bottom cover did the trick. Which I could of found this video a year ago. Thanks again
You're welcome it happen to me this is why I did a video cause I couldn't believe it. It took me a couple of days to figure it out very frustrated but love the printer
Oh my gosh I cannot thank you enough. T_T was messing with it for over an hour until I found a micro USD card jammed in the third compartment. Thank you so so much for your help.
Thank you so much! My problem was I hung a picture on the wall above my printer. Then a few days later went to use it and had sheetrock dust over the rollers. But the main problem was underneath the white door that you open. I had a drywall anchor that was stuck in there!! I would have never thought to look in there to find that so thank you!
hahahah, thank you , that bottom compartment is a big hit with everyone, no one knows about it, including myself, where I found a piece of zip tie and my printer didnt wanna print
Bought this for wifey a few years ago. She hasn't been able to use it since not long after I bought it. You think she would say something. She just bought a new one today. Now I have a nice printer of my own.
Lol it's crazy the stuff you find stuck at least you didn't lose your patience and threw it against the wall awesome that my video helped you take care and stay safe
Omg Thankyou so much for this I was printing something and the paper got jammed and I stared freakin out cause it was loud so I shut It down immediately
The paper would not feed properly..I think turning the printer upside down and pulling out that white tab did it. I didn't have to clean the rollers and I didn't find any stuck paper but something triggered the mechanism. Thanks for the video!
wow that bottom place where the plastic can be removed was my issue! lmao i had a damn thumbtack in there somehow lmao i was so frustrated, thanks so much bro!
I see the paper in the front and underneath but it is totally stuck. When I pull on it from either location it just rips. Any other way to get it out? Thank you!
Thanks for these great tips. I have done everything you have shown here but the paper will not run through. There must be something though because it crinkles a bit as it loads. I opened the bottom and the paper makes it all the way there and seems ok at that point but doesn't go any further. I don't see any impediments stopping the paper from feeding. Wondering if its something after that trap door in the bottom. Any ideas I am all ears thanks
Take a look from the top check where it get stuck mines was getting stuck at the bottom a small piece of plastic was stopping it from going threw. With a flashlight look all around there gotta be something stopping it
@@TheReviewer85 from another video I found a good way to clean the rollers. I staples an alcohol wipe onto a business card and held it there while the roller spun. Did both of them. Still not loading and it crinkles. I just can't see the problem though even with a bright flashlight. Will try again later. Thanks for helping.
Wow thats a good trick I will have to try that one.. damn I wish I can help you with more it took me a couple day too but I figure it out keep me updated if you get it fix
thank you thank you thank you!!! have a headache trying to figure out what was wrong for the last 2 days found dried glue from my glue gun in the compartment underneath. I'm blaming my 5yr old
Ok so the day i was having that problem I had a small plastic stuck at the bottom so it was not letting the paper pass. So first check inside of the printer and flip it there a little compartment at the bottom you can check there to make sure there nothing stuck there you be suprise what people find there sometime
I just looked all i see is the plastic that holds the ink cartridge. I really don't know if it will damage the printer I wonder why you are having that issue is there a way just to bend it down
hi mate wondering if you can help me all sudden my printer not feeding right i did everything in the video basiccly it feeds paper in half way and stops feeding?
I have a half sheet of paper in there somewhere and you cannot see it and the printer is brand new. I've checked every spot and I cannot find it. Any other suggestions other than what you have covered here? Thank you
I check everything and its okay, but the program still say there's paper jam, i had my pen stuck last at the paper refill thing and i think my sister get it out but still problem, the screen keep say there paper jam and won't let me print