HP PAVILION DV6 DV6-6117DX take apart video, disassemble, how to open disassembly

Подписаться 28 тыс.

Просмотров 130 тыс.

50% 1

Hi!
No music. No talking. Just work.
If you are taking your HP PAVILION DV6-6117DX laptop apart be careful and wear an anti-static wrist band or use other anti-static device. If you need to change a LCD usually you don't have to take screen out of a laptop. You can leave it on a laptop and watch the last part of the video where I am taking LCD apart. If you need to change a keyboard, you don't have to take all bottom screws out. There are usually some marks, like a keyboard picture, on a case bottom. If you need to put a laptop back to work be aware of screws. They are different and you better remember or mark them somehow to insure that you will put them back in to a right place.
Some laptops I take apart first time, so don't be serious on my time and performance.
If something got broken - ooops, it's your fault.
Believe me, some parts in your laptop are already broken, you just don't see that.
So, just watch this video and fix your laptop.
Have fun and good luck!!
regazzz #recycling #recycle #upcycling #zerowaste #sustainability #reuse #environment
#handmade #waste #sustainable #diy #vintage #recycled #demolition #upcycle #design #scrap #repair #disassembly #Technology

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 141

@regazzz 11 лет назад

Hi, you are the type of viewer that I am targeting my videos for. People who are able figure out everything!! You understand what you need to remove and what not. For people like you - my videos can help to replace pretty much everything in a laptop :))) Great job!

@kenrobbins1927 8 лет назад

Thanks for taking the time to make this video. I was able to replace the fan in mine faster than the time it would have taken to drive it to the shop and pick it up...........

@cfinoman 4 года назад

Wow awsome work man it will really help me now to change the body of my laptop it’s broken thank for doing it from years back

@regazzz 4 года назад

Hey, believe it or not, but such comments about videos I made a while ago - always make my day! THANK YOU!

@AindriuMacGiollaEoin 11 лет назад

I dropped my DV6 6053ea and need to replace the laptop casing with a new one. I can see from your video how to remove all the screws & strip the laptop apart. I'm getting the replacement parts soon so I can do it myself. thanks for the video,

@JorgeC33 7 лет назад

Thanks for the video. It helped me. I have to teach you something. In minute 1:03 you have to slide de "battery button" (to extract battery) to the right side, and then the cover go out by itself. !!

@rdhamill 11 лет назад

Thanks my fan went out & this video helped, it is exactly the same as my laptop. There were parts I did not need to remove so I got it done quicker, about 2 hours. If you have a fan go out, you may be interested to know I got one from ii battery dot com. Took paypal so I figured I could go back and reverse if nothing came, but it did. I didn't have to mess with the part attached to the cpu chip, it was just the fan itself. Pulled motherboard, turned over and removed 4 screws on fan housing.

@regazzz 11 лет назад

Thank you! 50 c is a good temp. It is a good idea to put on high if you play or do some heavy load processing...

@superliljohn91 7 лет назад

Cheers for this, I managed to get the cooler off and blast it with some air and re-apply some thermal paste to the GPU and CPU. I'm amazed I managed to get it back together and it actually still works (now running 20-30C cooler too),

@regazzz 11 лет назад

Hi, I am so glad I can help you with your project! Make sure you will remember where all screws go. Also please understand there is no video on how to put it back. Wish you a good luck!

@regazzz 11 лет назад

Hi, thanks for telling me that, are you able to locate a screw I miss? I will make an annotation about that! 7k views and you are only one who actually care! Glad you watched my video. Thank you very much!

@romulobarata2742 8 лет назад

eu estava com dificuldades de abrir o meu. ajudou muito. eu tava com super aquecimento no meu dv6, ai so coloquei uma placa de cobre e troquei a pasta termica, mas to pensando em comprar um cooler novo pq ja ta voltando

@regazzz 11 лет назад

Yeah, I just got a little bit more time to answer. If you check to pics. One dv6-6000 motherboard and another one dv6-1000 motherboard it will be a huge difference. So, I will not check for -2000 -3000 but if they look similar and compatible you will be able to find that somewhere on internet.

@shehabsoliman 3 года назад

Thank you a lot for making this video

@sumitapte4888 8 лет назад

Thanks a lot @regazzz :) I was able to fix my dv6 6b80se after falling down from the table :) Many many thanks...have a good day !!!

@regazzz 11 лет назад

You are welcome! Glad to here it helped!

@regazzz 11 лет назад

Yep, this should be the best match after exact model...

@regazzz 11 лет назад

Yes, this is normal. 75C while gaming is just great.

@regazzz 11 лет назад

Thanks you very much for such a useful comment! Is there a button to open that door?

@moonligthelfenl 10 лет назад

Gracias campeón, mejor que el manual!

@regazzz 10 лет назад

Gracias amigo! You are very welcome! I watched a few HP videos on how to change staff - this videos sucks!

@regazzz 11 лет назад

Hi, as you may noticed, this video about how to take a laptop apart. Would you take LCD out to change RAM? No. On the other hand anybody who need to remove LCD will watch. Open this little door where RAM is located and remove it...

@regazzz 11 лет назад

Yep, that maybe a reason! Have a good luck!!!

@FDRFERNY 12 лет назад

Thanks alot i appreciate your work!!

@madelineoc 12 лет назад

Thankyou! Helped me a lot

@regazzz 12 лет назад

You are welcome!

@regazzz 11 лет назад

This video is about how to take a whole laptop apart. Of course by looking it you may find your way to a fan or just lcd, etc. This laptop, if you remove only a keyboard - there will be no access to a fan. You will need to remove a palmrest, but this mean you have to follow pretty much everything I did prior to palmrest removal.

@fbcvicent 11 лет назад

Excelente video me ha servido mucho gracias

@Funkwitheverything 10 лет назад

You know you can just slide the battery slider the other direction, instead of using a barbaric knife, right?

@regazzz 10 лет назад

LFoxter No, I am doing it for fun to get some type of comments like yours :)Ok, sometimes this cover got glued by some liquid that was spilled and than it getting very hard to remove :)

@Funkwitheverything 10 лет назад

regazzz Or you had no clue it works that way

@icarusints 8 лет назад

totaly right

@regazzz 11 лет назад

To be honest, pretty much all non gaming laptops are not suitable for heavy gaming... so they can be hot and depend on the game and settings FPS will be lower and lower. Anyway, if you are sure the dirty fan is the main problem, to clean it will be a good idea.

@MomoThamavong 12 лет назад

i'm really appreciate ur workkk... So helpfull man.,it's really!! :) keep going man :D

@regazzz 11 лет назад

Hi (sorry for delay) around 2-3-4 no more than that on this laptop.

@regazzz 11 лет назад

I can't, but if you will look for a fan for dv6-6117 - I am sure you will find a right one.

@regazzz 11 лет назад

Is there a speaker next to the screen? I think it has only speakers on a front part of a case bottom, right under touchpad???

@regazzz 11 лет назад

Thank you very much!

@verma.shaurya 11 лет назад

Thanks.. awesome vid. I ended up replacing just the fan. (accidentally ordered just the fan) I have a question, now, when the ambient is 28C, with the new fan, the core temperature hovers around 50C. This is with standard fan settings. 1. Is this normal/safe? 2. Is it worth the noise to put the fan on high? 3. Any reduced fan life from keeping it on high? I think replacing the whole unit would've been better. cos there was some impossible to remove gunk in the sink blades.

@regazzz 11 лет назад

I would say anywhere online. Ebay is a usual place.

@castillolex6224 10 лет назад

Muchisimas gracias amigo me sirvio el video Excelente. like

@reaperpazuzu 9 лет назад

Muchas gracias por compartirlo, me sirvió mucho.

@ihateyoutube7374 11 лет назад

the main one I cant remember is where the the speaker next to the screen hooks up. most others are self explainitory but if you could help me id love it because I really want to learn.

@regazzz 11 лет назад

Hi, I think it is build in to a video cable. and mic is in webcam...

@walther89 11 лет назад

01:04 u have that slide button to open that case there :D

@regazzz 11 лет назад

Hi, depend on how dirty is the fan and heat sink.

@regazzz 12 лет назад

Thanks a lot!

@regazzz 12 лет назад

Thanks!

@regazzz 11 лет назад

if you removed heat sink, you need to re apply thermal paste, because it is probably old...

@moustafa_1994 6 лет назад

Many thanks sir

@ParunR 12 лет назад

vry vry nive.. brooo..

@spiritusinfinitus 11 лет назад

You shouldn't need to use a knife for the bottom hatch. Just flip the battery switch the other way once the battery is out and it'll pop open. (that's the idea anyway)

@Kuzame 9 лет назад

At 10:24 , is the GPU (not intel chip's one) supposed to be the big brown-like chip under that circle battery? Or the big blue chip on that circle battery's right side?

@regazzz 11 лет назад

No need to fix a laptop, if you are scared and not sure. If you are feel unsafe to do that - I would definitely recommend to ask a professional who can fix it for you. Yes, for some money, but at least you don't need to worry about that. Just make some research first, ask friends about tech's they know.

@ihateyoutube7374 11 лет назад

I cant tell where you took the 4 pin male from all I know it was fed through that hole you pulled it out of and as far as I can see there are two 4 pin males one black and one white.

@MW14171 9 лет назад

I have a HP Pavilion Notebook dv6-1330sa and after repairing its power/charging issue there is no audio device installed. I have windows 8 and there is no driver issue for the sound so how can i fix this?

@regazzz 11 лет назад

Once you removed all screws that holding keyboard, it should be easy... unless there was some spill and something sticky like glued this keyboard :)

@YADADADADADADAKABOOM 9 лет назад

my girlfreind has a dv6-6110us laptop, and I was wondering, could I replace the case (both upper and lower) with the case of a dv6000? or possibly something else? I can't seem to find the specific case to her model anywhere.

@Deathzone723 11 лет назад

ive opened it and cleaned my fan but the problem is still the same what should i do? ive seen other videos were they do stuff with heat sync and saw them applying thermal paste to it

@regazzz 11 лет назад

Better not to use knife at all :) Some times some parts are like stack, and don't want to get out :) If I take out knife - this parts got scared and everything working out well :))

@DuMaExpansion 11 лет назад

Is there anyway that I dont have to remove all of that? Because I just wanna clean the fan, there are a lot of dust in the fan.

@chriskellyseo 10 лет назад

Damn your handy with that knife ... Just wondering, did you put this one back together?

@kimmiboy2 11 лет назад

Seems like you are removing quite a bit. How much do i need to remove/unscrew in order to get to the fan?? My fan is broken, so i though i might have a look at it and clean it if necessary. Thanks :)

@WizardTechnologies 11 лет назад

Would this be the same take apart as the HP dv6-6110us ? I need to change the fan in my laptop trying to find a good how to for doing this. this one seems closest to the model I have

@ihateyoutube7374 11 лет назад

hey I need some help, I cant really remember how to rewire my dv6. do you know of any diagrams or places I can go to find something to help me, I basically have it put back together but ihad to replace the bottom half so now I have to figure out how to get everything snug and fitting properly. I went to the hp site and couldn't really find anything on this model.

@verma.shaurya 11 лет назад

Thanks very much for replying.. I think I jumped the gun with the values. It hovers around 60C when I'm not working the cpu too hard, and easily crosses 75C when I game. This is after the new fan. When the GPU's turned off at idle it does come down to around 50-55 though. Is this normal? Cos I got the fan from some chinese site, althoght the fan code was correct.

@faroukchelabi 11 лет назад

dear you do no need to use knife to pop out the RAM disk cover just use the same leaver that you used to open the battery but slide it the other way

@coolex98 11 лет назад

hello,imy laptop says that my proccesor ia t 90 c and gpu to,my fps drops really bad in game and ping rises at 1000 will cleaning up help?,thaanks,by

@regazzz 11 лет назад

I do not think so, you may ask a motherboard sellers to make sure ...

@bradleysctt 11 лет назад

hey, do all hp laptops from the same series have the same shape motherboard etc? my one has an amd 3305mx cpu(bad, i know), and i want to get spare parts(motherboard,cpu etc) from hp for an i7 model from the same series. will the new motherboard fit, if they are from the same series?

@vicio14061982 10 лет назад

Hi! thanks for this tutorial, I found it very useful! I have just one question: I have a dv6-3149sl, should it be the same?

@regazzz 10 лет назад

Hey, subscribe for close to 400 useful videos and for more in the future! :)

@MrJacksaunt 11 лет назад

Do you have to take the wireless card out to get to the fan, motherboard, etc.?

@SH3player 11 лет назад

Could you please tell me the pin count on this monitor's cord connection?

@w4u143 8 лет назад

Help somebody my notebook HP DV6 screen is totally blank, how can i fix pls

@gtaman72 11 лет назад

To get to the ram do you need to unscrew anything or will the plastic panel it just pop out?

@jhonjesus8416 4 года назад

Gracias amigo........pero me sobraron tornillos jejejeje.

@regazzz 11 лет назад

haha, didn't know that, thanks!

@ferdakpos9003 9 лет назад

I opened it to get a cooling fan #, put it back together and it does not start at all. Any idea??? Tomorrow I will try again to take it apart and put it back together...

@regazzz 9 лет назад

ferdak pos Best case scenario - power button. Maybe cable isn't connected properly.

@SMGJohn 8 лет назад

I really fucking hate taking apart HP laptops or any OEM machines really, the ODM are really easy to take apart in comparison which is surprising.

@khrisplex 11 лет назад

how many screws to remove keyboard???? 1 or more than 4??? thanks

@chamrouen9131 11 лет назад

ok found it. It's 641485-001 on a black label. Saw it around $140 on ebay that weill ship from China, worth a try? Thank for you reply!

@sobs2171 9 лет назад

thanks !!

@chamrouen9131 11 лет назад

Do you know where I can find that motherboard's model on the market? Or do you know anyone that selling one?

@bradleysctt 11 лет назад

ok, thanks

@themkrr 11 лет назад

Can you tell me the FAN part number? Thanks!

@Saebertooth4u 8 лет назад

one question! what is inside those copper heat pipes? r they solid metal? or is there some liquid in them?

@regazzz 8 лет назад

It is an empty pipe.There shouldn't be any liquid.

@regazzz 11 лет назад

I can't, sorry, I don't have this one anymore.

@chrisdaniels160 10 лет назад

I have a problem with my Dv6 and that is it wont charge the battery anymore after disassemble... Help please!

@regazzz 10 лет назад

First of all make sure that DC jack is plugged in.

@Deathzone723 11 лет назад

scared to open it but i have the system fan 90b error, :( i guess i have to :'(

@sonujagarwal3973 5 лет назад

HP dv6 laptop ki HDD sata cabin mil jayegi kya sir

@matde100 10 лет назад

do you have to remove the cd/dvd tray to be able to remove the keyboard?

@regazzz 10 лет назад

Hey, all laptops are different, but more likely you don't have to.

@mapleAznboy 11 лет назад

hey which cable is the webcam and mic?

@jepedo52 11 лет назад

How well can you game with this laptop?

@regazzz 11 лет назад

I would say not really, I do not trust parts from over there... but the only good thing is that if motherboard will be faulty you should be able to get a full refund.

@eacmdq 10 лет назад

I have a problem with my 6117dx. I doesn't turn on for a few times, then when it finally turns on everything is fine the windows starting boot screen appears but then when the desktop is loading, the screen goes black and the touch pad LED dessapears... Then I try to plug an external monitor and I can see my desktop, it works fine. But the touchpad and keyboard does not respond at all. I also have to plug and external keyboard and Mouse to use the notebook. Then if I shut the notebook down and try to turn it on again nothing happens.. Then a few times trying to turn it itstarts but with the same issue as before. Any ideas of what it this?? Any solution?? Thanks in advance

@regazzz 10 лет назад

Try to start in Safe Mode. But with a keyboard and touchpad ... pretty weird. Was laptop dropped at some point? Make sure keyboard and touchpad are connected to a motherboard. You may also tryout a different keyboard. Overall with all this issues altogether it sounds like a bad motherboard. But I would test it in different way first.

@eacmdq 10 лет назад

But is there a relationship between the blackout screen, touchpad and keyboard unusable? no the laptop wasn´t dropped. I care it to much... I don´t know what to do :S

@ishtiaqueahmed123 10 лет назад

Hey. I have a question. I did everything you did over here when I was going to replace the fan. Then I put back everything together. then I do not see any display but it was working fine before I opened it. I checked the connection multiple times before i put them back together. Any thoughts what could be the problem?

@regazzz 10 лет назад

Do you see anything on external screen?

@ishtiaqueahmed123 10 лет назад

i took care of it. thanks though for replying. it was a misplaced scew

@regazzz 10 лет назад

GREAT!!!

@regazzz 11 лет назад

Let's say it will help if it is dirty. :)

@regazzz 11 лет назад

You probably don't need to, because right after you will take out a palmrest fan over there.

@regazzz 11 лет назад

this isn't a motherboard number. Look behind memory.

@geraldgonzalez975 10 лет назад

I got the same laptop and i wanna know where the inverter is?

@regazzz 10 лет назад

Hello, there is no inverter. It is LED

@geraldgonzalez975 10 лет назад

regazzz oohh right ty!! Man i got a problem with my screen i see everything under the sun but the screen dont have any light tellme what to do plz... :)

@regazzz 10 лет назад

Connect to a external screen, start a laptop and check how does it looks on external screen. If everything looks fine - means your screen is bad. More likely. If same as on your laptop screen - than it is a video issue on your motherboard.

@scartabellino 8 лет назад

Hi can you explain me were is the inverter?

@rubenlica1 8 лет назад

hey Hermes, have you figured this out?? I have the same question...

@scartabellino 8 лет назад

There isn't because is a led screen, you've to replace the entire screen

@ishaan0123 9 лет назад

Hey I finally opened my laptop. But how shall I close it again?? :'( its been two days m unable to pack it. :'(

@regazzz 9 лет назад

Ishaan Mehra I would say you may need to carefully place everything back together. (I wish there will be a backwards button on RU-vid)

@Ameya274 9 лет назад

this was a one way trip, no return ticket :)

@chamrouen9131 11 лет назад

I did search on ebay, but no luck at all. My motherboard number on the Microsoft label is 584037-001 Would any number that relevant would work or does it has to be exact number?

@Ameya274 9 лет назад

Screw count = ???

@chamrouen9131 11 лет назад

But, all the electronic are made from China XD. Including all the component. Anyway, thank for your help!!!!