HTC U Play Repair Parts: bit.ly/2yrkEPh
DIY HTC U Play Repair Tools: bit.ly/2lzLIop
www.fixez.com presents the official HTC U Play Teardown and Reassemble Guide. This step-by-step repair video will show you how to replace a cracked HTC U Play display assembly, swap a battery, and also how to completely teardown and reassemble your HTC smartphone. Visit Fixez.com for all of the DIY HTC U Play replacement screens, parts and tools you need to quickly, and affordably, fix your device!
If you need your HTC U Play smartphone repaired ASAP instead- we have you covered there too. Contact one of our skilled technicians at 866-233-6460 or support@fixez.com and they will fix your HTC device for you. They are available Monday to Friday, 9am to 5pm PST.
Subscribe to our RU-vid Channel for additional DIY smartphone and tablet teardown and repair videos! / @fixez
Like us on Facebook: / fixez.com
Follow us on Twitter: / fixezdotcom
HTC U Play Teardown Repair Guide Steps:
Step 1
• Power down your HTC U Play phone.
Step 2 (HTC U Play SIM card and microSD card tray)
• Eject the SIM card and microSD Card tray.
Step 3 (HTC U Play Rear Glass Panel)
• The HTC U Play rear glass panel is glued on solidly. Apply heat to soften the adhesive.
• Use a triangle opening tool to attack the adhesive and dislodge the rear panel from the phone.
Step 4 (HTC U Play Motherboard)
• Remove the following 7 T5 Torx screws and 3 Phillips screws.
• Use the flat end of the spudger to pry up the plastic shields that cover the motherboard and daughterboard.
• Spudge the HTC U Play battery connector up from the board.
• Remove the following Phillips screw.
• Detach the bevy of cables from the HTC U Play motherboard.
• Carefully pry the motherboard up and out of the phone.
Step 5 (HTC U Play Proximity Sensor and Ambient Light Board, Rear-Facing Camera, and Front-Facing Camera)
• Pop off the small board that includes the proximity sensor and ambient light.
• Extricate the 16-megapixel HTC U Play rear-facing camera from the motherboard.
• Remove the impressive 16-megapixel HTC U Play front-facing selfie camera.
Step 6 (HTC U Play Loudspeaker and USB-C Daughterboard)
• Easily lift the loudspeaker out of the smartphone.
• Remove the small metal bracket and then use the spudger to disconnect the flock of cables from the daughterboard.
• Use the tweezers to free the vibrator from the adhesive securing it in place.
• Pry the HTC U Play daughterboard up from the midframe. It includes the USB-C connector, vibrator, a microphone, spring contacts, and some control hardware.
Step 7 (HTC U Play Battery)
• The HTC battery is well wedged and adhered in place. Use a spudger to help free it from the adhesive securing it to the midframe.
• Lift out the 3.85-volt, 2435 milliampere-hour (mAh) HTC U Play battery.
Step 8 (HTC U Play Earpiece Speaker, Metal Frame, and Power and Volume Buttons Cable)
• Tweeze the HTC U Play earpiece speaker out of the chassis.
• Remove the following 8 Phillips screws.
• Extract the HTC U Play metal frame.
• Remove the signal cables and then use the tweezers to remove the fragile power and volume buttons ribbon cable from the side of the midframe.
Step 9 (HTC U Play Display Assembly)
• Peel the tape and Interconnect cables off the frame.
• The 5.2-inch HTC U Play display assembly is glued solidly to the frame. Apply heat to soften the adhesive.
• Use the precision knife to create enough space to insert a playing card.
• Use the playing card to slice through the sticky adhesive. Take your time and apply additional heat as needed.
• Once you have sliced through the adhesive, be mindful of the display cable when decoupling the HTC U Play screen from the midframe.
Step 10 (HTC U Play Cables for the Bottom Buttons and Home Button with Fingerprint Sensor)
• Carefully remove the cables for the bottom buttons.
• Extract the HTC U Play capacitive home button and fingerprint sensor from the midframe.
* To reassemble your device, follow the steps in reverse order.
25 сен 2017
