Watch the HTC U Ultra Teardown and Reassemble Guide video and take a look inside HTC's latest phablet. This step-by-step teardown guide will show you how to completely take apart and reassemble your HTC U Ultra, and also provides comprehensive screen and battery repair instructions. Visit Fixez.com for all of the DIY HTC U Ultra replacement screens, parts and tools you need to quickly, and affordably, fix your device!
www.fixez.com/store/htc/htc-u...
Subscribe to our RU-vid Channel for additional DIY smartphone and tablet teardown and repair videos! / @fixez
Like us on Facebook: / fixez.com
Follow us on Twitter: / fixezdotcom
HTC U Ultra Teardown and Reassemble Guide Video steps:
Step 1
• Power down your HTC U Ultra phablet.
Step 2 (HTC U Ultra SIM card and microSD card tray)
• Eject the SIM card and microSD Card tray.
Step 3 (HTC U Ultra Rear Glass Panel)
• The HTC U Ultra rear panel is glued on solidly and is a tight fit within the narrow bezel. Apply heat to soften the adhesive.
• Use a playing card to attack the adhesive and dislodge the rear panel from the phone.
Step 4 (HTC U Ultra Loudspeaker)
• Remove the following 16 T5 Torx screws.
• Remove the top plastic shield that covers the motherboard.
• Lift the bottom plastic shield out of the phablet.
• Remove the following 2 Phillips screws.
• Spudge the HTC U Ultra battery connector up from the board.
• Detach the HTC U Ultra loudspeaker and pry it out of the phone.
Step 5 (HTC U Ultra Motherboard)
• Detach the bevy of cables from the HTC U Ultra motherboard.
• Remove the following 2 Phillips screws.
• Carefully pry the motherboard up and out of the HTC phone.
Step 6 (HTC U Ultra Rear-Facing Camera, Front-Facing Camera, and Proximity Sensor and Microphone Board.)
• Extricate the 12-megapixel HTC U Ultra rear-facing camera from the motherboard.
• Remove the impressive 16-megapixel HTC U Ultra front-facing selfie camera.
• Pop off the small board that includes the proximity sensor and a microphone.
Step 7 (HTC U Ultra USB-C Daughterboard and Vibrator)
• Remove the metal bracket.
• Disconnect the ribbon cables from the daughterboard.
• Pry the HTC U Ultra daughterboard up from the midframe. It includes the USB-C connector, a microphone, spring contacts, and some control hardware. The vibrator and 2 signal cables are also still connected to the board.
Step 8 (HTC U Ultra Battery)
• The HTC battery is well wedged and adhered in place. Use a spudger to help free it from the adhesive securing it to the midframe.
• Lift out the 3.85-volt, 3000 milliampere-hour (mAh) HTC U Ultra battery.
Step 9 (HTC U Ultra Earpiece Speaker)
• Tweeze the HTC U Ultra earpiece speaker out of the chassis.
Step 10 (HTC U Ultra Metal Frame and Power and Volume Buttons Cable)
• Remove the following 10 Phillips screws.
• Extract the HTC U Ultra metal frame.
• Peel up and remove the fragile power and volume buttons ribbon cable.
Step 11 (HTC U Ultra Display Assembly)
• The QHD, 5.7-inch, HTC U Ultra display assembly is glued solidly to the frame. Apply heat to soften the adhesive.
• Use the precision knife to create enough space to insert a playing card.
• Use the playing card to slice through the sticky adhesive. Take your time and apply additional heat as needed.
• Once you have sliced through the adhesive, be mindful of the dual display cables when decoupling the HTC U Ultra screen from the frame.
* To reassemble your device, follow the steps in reverse order.
30 мар 2017
