Huanuo Dual Monitor Mount! (Unboxing and Setup) 

I just bought the product yesterday and this video helped me out a ton thanks you!

Appreciate this! My employer ordered me one of these stands for my home office and I needed a visual to follow for set-up. Excited to give this a try!

Thank you thank you thank you!!! I opened up box and sat and looked at the manual. I put it off for 3 days then came to yt and found you. Super easy instructions!

Huanuo should pay you because their terse instructions with convoluted graphics are unreadable

I viewed the instructions and was like,”Hell no” and wanted to give up before I got started. Clicked on your video, rewind a few times, got it done in a reasonable time, and felt damn good about it !!!!! Thank you you for a simply and seamless video - ❤

A few people are saying the instructions were convoluted, I thought Huanuo provided just enough pertinent information. Great video and review.

That was very helpful, thank you!

Thanks for this video buddy. Liked 👍👍

Very helpful and to the point.

Thank you sooo much for your help!!

This is a great review! Thank you for sharing this and going into so much detail. I'm excited for mine to arrive in a couple days as an upgrade for my setup.

Superb video, that really helped me to setup mine! Height adjustment seems to be the main issue for me, its tricky to get both monitors (both 27 but different models) equal

Getting this tomorrow. Finally.

Beautiful piece 💪🙏

Thank you very much Sir!

Thanks for the review and the coupon.

The directions for the stand was such a struggle im so thankful for this video😭

love it!!

Got this monitor stand. Seems nice

Thanks for posting this review. I currently have my 72x30 desk up against a wall- how much clearance do I need so that the monitors don’t hit my wall?

nice video thanks

Thanks for the video. If I want one monitor centered on the desk do I have to offset the mount on the desk?

Nice video bro u really should get money i buying it cause i saw the ez montage on ur video was thinking of buying it but now fs i will buy it ❤

I wanted to buy this mount, but had so many questions. After watching your video, i have zero questions. Love your calm and gentle style of explaining and talking. Subscribed!

The arm that holds the monitor isn't staying where I want it, I twist the Allen wrench hole counter clockwise until I feel that it's gonna snap, then it just pushes up to default position?

Very nice video. Simple, structured and answered all queries. Thank you

A helpful review video. 👍 I am interested in if it damaged your desk after a long term use. Any chance you can update the coupon code?

I need this but for 33 inch monitors. I have that pro art at work it’s very nice.

How do you set monitor to vertical? My MacBook Pro m2 pro doesn’t give that option.

Will this arm work for a dual 27” vertical stacked setup?

I have a 24 proart and gonna get a 27. I was worndering if I can have the 28 centered in front of me and the 24 on a side at around 50/60 degrees. Are the arms long enough in your opinion?

Can you do a top and bottom monitor set up with this arm ? Please lmk

would you also recommend the single monitor arm from huanuo?

how long/tall is the bracket? I got a desk with a cable management tray that kinda blocks some things so if its too tall it wont work for me :/

Not sure what everyone is talking about with the instructions. I think people are confused because they combined two configurations, one for clamp and one for if you are using a drill. The instructions were pretty straightforward. I think the only con(mostly user error if anything) is that you need to know how thick/height your desk is before installing. Mines was not thick enough for the clamps to reach so i had to use a book to make it thick enough to keep it in place. Had i known i would have gotten like a block of wood or something from my job to use. Its holding fine otherwise lol

Ty for vid

Planning to buy this monitor. I have very limited clearance between my desk and wall, half an inch. Would this mount work for my set up?

great help

I love seeing the mini pc getting some use, really thinking about simplifying my setup and getting rid of my full size tower, maybe replace with either a framework or mini pc.

Thanks for making this. For some reason mine did not come with any directions.

Would you say a 2m hdmi cable is enough or 3 m to be sure?

Does anyone know which type of screw comes with the mounts? I lost mine and need to find the correct replacement! Thanks.

What monitors are you using?

Great video! The instructions that come with the equipment are awful and it appears yours came partially assembled unlike mine. Thank you for the tips and helpful info!

How do you think this be mounted against a glass desk?

Can I do top and bottom monitor configuration with this stand?

Hi I'm here to ask a question is there anywhere to get a replacement for the c-clamps because I bought a PC that came with a dual monitor stand It came with everything but the clamps so I'm asking if anyone knows where to buy replacements I've been looking online but I can't find the exact one idk if I need the Pacific ones but I think I do someone help me pls

i thinking of buying this but my monitor has a diamond shape that the stand is on not an x what do i do?

I'm happy the discount is until Feb 31st because it buys me a couple days more I would otherwise not have available in my calendar. Thank you for that my friend!

I got one of these at a thrift store today for 20 bucks, hardware still sealed in the bag. Setup was pretty easy. I have a 32 inch on the left and a 27 on the right... and yes, oh the desk space 🙃

Nice uncle giving niece a starring role 😀. TechHut Jr Channel soon? Products good and nice review too

i bought mine used, and the 2 arms where not attached to the base, It came with 1 of those rectangle washers that you see holding the arms to the base, I am trying to find another 1 of those washer brackets. Do you know what they are called??

Mine keep tilting down. How do I fix this and which Allen key do I use?

I got this mount but the right side doesn’t stay up per say, the monitor that’s on it is 27 inches and isn’t too big so idk the issue

Great video and explanation of the product, I was just wondering if the screws used to place the monitor into the arm are packaged with the product? Are 8 screws provided or would I have to get them my own?

How tall can the arms go? I installed mine to have them very high but I can’t reach more than 10 inches from the desk to the bottom of the monitor. I am really frustrated 😢

Can you stack the monitors?

When i have it on , vertical. The monitor wants to fall off.... any ideas to stop it

I have one of the same pro art monitor and a 144hz 27 on a monoprice stand and am running into the same issues. I honestly love the stands but they just take up too much space on my desk. I was initially going to get a deeper desk but after a lot of hunting around there is nothing out there that matches both the length and width I want that wouldn't run me at least a thousand dollars. In the end figured I'd finally get myself a dual monitor arm and settle on a 24" deep desk. Kind of surprised to find one of the 'cheaper' options works this well, I've had some terrible experiences with less expensive stands (usually for customers who bought a stand without doing much research first) and will probably get the monoprice workstream stand but it's good to know these do work if tight budget is a concern.

How to stop them from swinging too much??

TikTok monitor just came in today for me :D

Hello, thank you for this video super informative, since you had it for a few months could i ask one more question? what about the stability/wobble of this thing? considering im playing game that requires a lot of fast mouse movement my desk happens to shake a lot, will my screen shake even more on these arms?

Can you link the monitor?

Is it height adjustable?

mine is to stuff and wont let me but it further down so it stays up

I got the same monitor mount and when I took off the velcro it hit me in the face so fast

6:00 whew i thought i needed a niece to purchase this monitor stand

Will it support 34inch?

what kvm switch is that @4:21 mark

how do i put it down

Can you stack them

Take the top arm off, lay your monitor flat and screw in. Then place back into the stand nice and easy

feb 31? how the hell, we have a 31 Feb calendar?

I have a question. I have two 27 inch monitors but they are 3 pounds heavier than what the max says at 14.3 lbs. do you think this mount will still be able to support them or do I need to return it for another?

Can you rearrange them fully? So stacking them on top of each other? And then even switch which one is on top or bottom? I am looking to mount a vesa imac on the top and normal monitor on the bottom, but being able to switch them around if I need the imac on the bottom and the monitor on top.

Did anybody have to drill a hole and use the grommet?

Did the stand come with screws to mount the monitors? One of my monitors has screws already but I can’t find screws for my 2nd monitor. Just want to know if I need to order more

speaking of monitors, the macOS scalling works best when the display has ppi of ~110 or ~220. That's why Apple's 27" display is 5K not 2K or 4K. Does similar limitation linux have? As in on your 27" 1440p monitor, which is at ~110 ppi, macOS default scaling would work fine, but what about linux? would it need fractional scaling on 110 ppi display? or default scaling/200% would look appropriate on 27" display having ~110 ppi? I am bit confused which one to buy, 27" 1440p (~110 ppi) or 27" 4K (~165 ppi)

Does arm is compatible to attach any monitor? Does all monitors have a universal attaching gap?

I just ordered this dual monitor mount. I got one that was like $15 cheaper but it doesn't move up/down which sucks for me since I have a standing desk and I need to change the height of my monitors when I sit down and when I stand. Thanks

Maybe I missed it but would have been nice to have a more clear overview of everything included. I'm still not sure if there are just 4 screws or 8 screws included since it's s *dual* monitor stand.

Can a 32 inch be good for that

Hm why can't I get both my monitors that close together 🤔

Which monitors are these in particular? I didn’t see it in the description.

Great video brother, wich monitors of ASUS or those tho?

Not sure if anyone will see this: but I just bought one this exact mount and the tightening hole to loosen the arms is not working. My arms will move left and right but will not budge at all for up and down movement. Any thoughts?

Rwinows?you should install Nobara asap

For the arms is it 14 pounds for each arm or it can only hold 14 pounds?

im thinking of getting this how does it hold up now after 2 months and anyone else will it hold a 15 to 20 pound monitor i have a old dell 2005 monitor

Love the rasberry pi on the desk you don't actaully do anything with. They sell millions of them that just sit in a drawer.

code doesnt work

31st of February! LOL! :) 8:31

Code good until Feb 31st you say? hmmm

What keyboard are you using at 0:46?

Can you have the screens one on top of eachother ??

I like 2560 x 1080 resolution

When videos related to Linux?

my monitor dosent have anywhere on the back to mount?

what's the max that you would go for each monitor(size)

code until 31 february....... are you kiding? lol