Huanyang inverter spindle driving motor 

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UxT2y8b_0SE.html

Low RPM? How low is it? High-speed motors cannot operate at low speeds. It will burn out the motor

@@huanyanginverter6516we are talking about 4000 rpm even at 4000 rpm it can burn?

Pd052 parameter

Was ist das für eine Antwort. Welche Ausgänge werden dann dafür verwendet. Man sollte das schon ausführlicher beschreiben

None of these parameters need to be changed. You just need to change the frequency.

@@huanyanginverter6516 .my question is in my 110v vfd ( and 2.2kw 110v spindle) the settings for pd 173, 174, and 176 do not stay changed . Keeps resorting back to 220, 11 amps and "0"....I need 110v, 20 amps, and "1" for 60hz. Maybe these settings don't matter, IDK... all other parameters retain their changes that I made. My vfd does say 20amps on label, although when spindle up to 24000 rpm, amps read 2.0 on display

@@jstef4136 20A is a limit number... Normal operation is far lower than 20A

@@huanyanginverter6516 but what about volts and Hz? do I have to reset these everytime I turn it on? I need 110v and 60 hz.

@@jstef4136 Input voltage does not need to be set.. The output rate must be set to the same frequency as the motor. This is very important.

Most likely it is UVW, missing a phase

Can be used in the U.S. 60HZ

Your sketching is too simple, I don't understand what you mean.. What is SR?

U=2 V=1 W=3 It's normal

@@huanyanginverter6516 Thank you!

​@@huanyanginverter6516 But probably I can swap any two of those, is it true?

U=2 V=1 W=3

yes

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KD_NrfL7ZZs.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eeiIWLAttHM.html

You don't need it.

@@huanyanginverter6516 so just 4 core so.. Will 18g be ok

No way, only up to 400hz

The UVW is connected to the motor, and that's it

A few years ago the product was reset to 01, and the current product reset was 08.

I guess other parameters were different. So give me parameters few years from now. Thank you.

I can't understand your meaning. Pls send me a video about your Problem. My E-mail is service@hy-electrical.com.

I mean factory reset was 01 instead of 08. And maybe other parameters were different too. Such as PD05 (max frq) etc.

Earlier versions restored to factory settings were set to 01 and are now set to 08 to restore factory settings.

This is a hint of low voltage

Process video shot and sent to me

And don't put the links when you commenting other channels videos, youtube delete them automatically

Thanks for your interest.I will post more and more videos. You can order from AliExpress.

Already ordered! Check out video-reviews on my channel.

Do you have something to review on our channels? We can review any CNC parts either in Russian or English.

Could you please give me a link on your AliExpress official store?

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UxT2y8b_0SE.html

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8mbLw3ytnFo.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UxT2y8b_0SE.html

The video shows 220V power. if you use 110V, the spindle motor also must be 110V.And It can stop in 5 seconds without adding brake resistor.

Can I use a step-up transformer from 110V to 220V if 110V source was not available?

You buy a 110V motor and VFD

I had 3000W step-up transformer to be use with 220V VFD version that’s why I am asking. Will it work?

has an effect. . . . But the load can't be too heavy.@@ferdieedquiban9047

UVW, changing to UWV can solve your problem

@@huanyanginverter6516 Gracias, ahora va bien

@@pharys10 Ok

whatsAPP：+86 18072595511 Be sure to contact me, do not continue to test. There must be something wrong with the parameters.

SKYPE: China-hy Wechat: China-VFD

Huanyang inverter I am having same trouble. Been three days and no response from company.

ok，skype:China-hy. Messenger:service@hy-electrical.com

we can help you also...