Două drujbe făcute de dibăcia ta să meargă așa bine față de cum merge astea stoc. Faină tare clipul💪. Te salut cu sănătate și spor la treabă să ai Ram🤝🤝🤝
I have a Stihl MS250C and a Husqvarna 353 e-tech, both about 17 or 18 years old. Both are excellent and reliable machines. The Hus has about 10% more displacement. I usually run 18" bars on both (both with 0.325" chain). For whatever reason (lower vibration maybe?) I prefer the Husqvarna for felling and the Stihl for branching/sectioning. For cleaning up windfalls I put a 16" bar on the Stihl. Quicker to resharpen (after cutting dirty wood that's been down some time).
Husky for the win. Next comparison MS260 vs Husky 450 Rancher :). The 450 rancher will obviously loose, but it is my favorite plastic case 50cc saw, it and the ms250 are the same power, as is the 353 Husky (but with a magnesium case). Have a blessed day.
Just proves you do not need a long bar to cut a big round. I cut up a 22”dead pine this past fall with 16” saws. I never got my bar in the dirt, even though I had to cut from both sides of the tree. I used myStihl MS 170,171, and 180, even though I had much bigger saws available to me.
Husqvarna 50.1cc e 3.7hp. Sthil 45.4 cc e 3.1hp . Comparação injusta pois tecnicamente a husqvarna tem mais potência deviam ser ambas de mesma potência. Mais parabéns pelo vídeo . 👍
Husqvarna 346xp, a fost cel mai îndrăgit motofierastrau de către muncitori forestieri, pt curățarea de crengi și fasonat în pădure. Asta se datorează faptului că e extrem de manevrabilă, și nu în ultimul rând are un raport putere/ greutate, care a impresionat și încă sunt căutate deși nu se mai fabrică acest model.
Big like my friend! Doua drujbe fantastice, cei doi producatori au facut niste masini care inca uimesc prin raportul greutate putere si calitate. Insa tu le-ai perfectionat si ai scos mai multa performanta! Te salut si spor sa ai!
Awesome video! I have read online that Stihl MS250/ 251 cannot run a bigger bar then 18” due to oiling issues. Have you had any trouble with your 250 running the bigger 60cm bar?
Adevarat au fost cele mai reusite modele de drujba 346 dar eu sunt departea adevarului amandoua sunt de firma sthil si huskavarna dar eu sincer sunt cu sthilu forta sthil si sincer uni an videoclipurile care le posteaza can taie fie cu sthil sau huskavarna se vede clar cand favorizeaza unul din aceste doua modele nui corect antrun cuvant carei mai bun sa castige bafta🥰🥰🥰🥰
Motorların kuvvetinden ziyade kullanılan zincirin markası ve zincirlerin bilenme ustalığınıda unutmamak gerekir. Ama biz orman kesiminde ms 250 ve husgwarna 365 kullanıyoruz
I'm a little confused either those saws are very powerful or the wood is just easy to cut in my area here in America wood is very dense that little saw would take a lot longer even Poplar would take forever maple gets even worse if you're talking about Oak you'll sit there forever
@@mrln247bro beech wood cannot even compete with oak in terms of hardness,it s much more quality and dense and harder than beech, when xou go with chainsaw into beech and oak it s like butter and rock
Urmasa 346 xp este 550 xp...ambele masini excelente,viteza,greutate redusa,manevrabilitate...din ce imi aduc aminte ...550 xp primul model a luat trofeul de masina anului...spor in toate!
I have a Husk 440 and a stihl 250, prefer the stihl as The husky has had starting issues since new. Will start up, cut 5 trees, stop for a while then its a bitch to start. the Stihl starts all the time, if I don't use it for 6 months, no matter, fires right u8p and cuts better than the husky. have had the Husky into the dealer 5 or 6 times, they cannot figure out the problem.
Urmeaza o comparatie intre ms 170 si ms 880 😁 Lasand gluma la o parte, orice e posibil...unde scrie ca e interzis sa faci comparatii intre diferite modele de drujbe... Toate cele bune și spor!